MARMITEK Sense SI Smart Wi-Fi Door/Window Sensor User Guide
- June 6, 2024
- MARMITEK
Table of Contents
MARMITEK Sense SI Smart Wi-Fi Door/Window Sensor User Guide
Indoor
wireless
open/close alarm
scene activation
battery
Package content
1 x SenseSI door/window sensor
1 x SenseSI door/window sensor magnet
1 x Bag with 4 x screws, plugs and 2 x adhesive tape
1 x CR 2 Lithium 3V battery
1 x Quick install guide
Safety Instructions
Please read these instructions thoroughly before you use the device and keep them for future reference. Only for indoor use.
- Do not expose the product to extremely high or low temperatures, strong light sources or direct sunlight.
- This product is not a toy. Keep out of reach of children.
- Dispose of batteries as chemical waste. Remove the batteries when you are not using the system for a longer period of time. Check the polarity (+/-) of the batteries when inserting them in the product. Wrong positioning can cause an explosion.
- Never open the product: the device may contain parts with deadly voltage.
- Repairs or service should only be performed by qualified personnel.
Requirements
This product requires a stable working Wi-Fi network (username/ password) connected to the internet.
Installation of the Smart me app
Download and install the Marmitek Smart me app from the Apple app store or the
Google Play store.
Launch the Smart me app after installation is completed. Follow the
instructions and register for a new account.
Installation of the Sense SI
- Open the Smart sensor housing and pull the plastic battery strip to activate the battery.
- The light indicator light should start flashing quickly. If it’s not flashing, push the reset button for 5-6 seconds until it begins flashing.
- Launch the Smart me app from your smart phone or tablet.
- Click on the + (upper right corner) to add a new device, confirm if the light bulb flashes quickly and follow the instructions.
- Press Help button during installation for more information or when installation fails.
Notes for using the product
- After the installation is completed you can configure the Smart sensor by using the app.
- Check our website www.marmitek.com for more details and how to use the Smart me products.
Technical specifications
| Detection | Open/ close |
|---|---|
| Trigger delay | ~ 3 seconds |
| Battery life | 2800 motion triggers |
1 year @ 7 p/day
2 year @ 3 p/day
Standby life time| 5 years
Wireless technology| Wi-Fi 2.4GHz
Power| Battery CR123A
Standby power| 13uA
Dimensions| 71 x 21 x 22 mm
40 x 11 x 11 mm
Declaration of Conformity
Hereby, Marmitek BV, declares that the Sense SI is in compliance with the essential requirements of the 2014/53/EU Directives. Full Declaration of Conformity is available at www.marmitek.com/en/declarations-of- conformity/
More detailed user guide and instructions are available on our website at www.marmitek.com
20726/20191106 | Sense SI™
all rights reserved © MARMITEK
stay connected marmitek.com
Documents / Resources
|
MARMITEK Sense SI Smart Wi-Fi Door/Window
Sensor
[pdf] User Guide
Sense SI, Smart Wi-Fi Door, Window Sensor
---|---