OTTO OTHD21WE Wireless Charger Instruction Manual
- June 6, 2024
- OTTO
Table of Contents
OTTO OTHD21WE Wireless Charger Instruction Manual
PRODUCT OVERVIEW
Orientation:
-
For AirPods Pro
-
For AirPods 1st/2nd gen with wireless charging case
AirPods and AirPods Pro are not included.
INSTALLATION
- Connect power adaptor to a working power outlet.
- Connect the USB cable to the power adaptor.
- Blue Light will be on when the wireless charging pad is successfully connected to a working power source.
- Put AirPods or AirPods Pro wireless charging case on the charging pad in correct orientation. Indicator light changes to green from blue when it starts charging.
- Blue light will be on if AirPods or AirPods Pro wireless charging case is removed, which means the wireless charging pad entering into the standby mode.
WARNING
The wireless charging pad provides wireless charging specifically to AirPods or AirPods Pro with wireless charging case. Using the wireless charging pad to recharge other device is NOT recommended and might cause damage to the charging device.
IMPORTANT NOTES
- A 5V/2A adaptor is suggested to use for the best charging results.
- Fully compatible with OTTO silicone protective case that does not require the removal from the charging case before use.
- Do not disassemble the charger or throw it into fire.
- Avoid water to avoid short circuit.
- Do not use wireless charger in severely hot, humid or corrosive environments to avoid circuit damage.
- Do not place items with magnetic strip or chip (lD card, bank cards, etc. ) on wireless charging pad to avoid magnetic failure.
- Please keep distance of at least 20cm between implantable medical devices (pacemakers, implantable cochlear, etc.) and the wireless charger to avoid potential interference with the medical device.
- Please take care of children and ensure they will not play the wireless charger as a toy to avoid unnecessary accidents.
TROUBLESHOOTING
| Issue | Solution |
|---|---|
| Blue status light is off | Check connection of the power source to the charging |
pad
Status light flashes in blue| Remove the AirPods or AirPods Pro wireless
charging case from the charging pad. Unplug the power source from the charging
pad and replug in again. Then place the AirPods or AirPods Pro wireless
charging case on the charging pad for charging
AirPods/ AirPods Pro is not being recharged| Check on the power source to
charging pad and reposition the AirPods or AirPods Pro wireless charging case
on the charging pad
Charging slow| Check on the power source to ensure to receive minimum 5V 1.25A
current
SPECIFICATIONS
- Model: OTHD21WE
- Input: 5V 1.25A min ~ 5V 2.0A max
- Output power: 5W
- Transmission vertical distance < 3mm (optimal)
- Efficiency: ≥75%
- Dimensions: 64 x 49 x 15mm
- Compatible with AirPods Pro and AirPods with wireless charging case
PACKING CONTENTS
- Wireless charger with built-in USB power cable x 1 pcs
- Instruction manual x 1 pcs
AirPods and AirPods Pro are trademarks of Apple Inc., registered in the U.S. and other countries.
