DiO 84214 150m Stylish Wireless Chime Receiver with Battery User Manual

DiO 84214 150m Stylish Wireless Chime Receiver with Battery

What’s in box?

Registering your warranty

To register your warranty, fill in the on line form at www.chacon.com/warranty

Introduction

Thank you for using this product.

• Please read the instructions carefully before using the device.
• Do not attempt to dismantle or repair the product yourself as it will invalidate the warranty.

Installing the indoor and outdoor units

Install the doorbell

1. Remove the cover from the battery
2. Insert 2 x 1.5 V AA batteries (not included) in the battery compartment. checking that the polarity of t he batteries is correct(+/-).

Use of the product

Once you have fitted the batteries to your indoor unit, there are just a few more steps before your new doorbell is working.
1. Once the battery is in position, the receiver makes a “Ding Dong” sound to inform you that it has gone into pairing mode.
You then have two minutes to synchronize the two units.
2. Then press the transmitter button.
3. If you hear a “Ding Dong” it means that the pairing process was successful.
4. Select the volume and tune of your choice, and press the button again to save your selection.

Indoor unit (chime)

1. Drill a hole in the wall at the desired height.
2. Then insert a wall plug (included) into the hole.
3. Then, insert a screw (included) into the wall plug.
4. You can then hang the receiver.
NOTE: The screw must not be completely inserted into the wall. You must retain sufficient length from the surface to hold the receiver (chime).

Changing the tune and the volume
If you want to change the tune and volume of your doorbell, simply press the appropriate buttons (see diagram) and press the button again to confirm your new selection.

Choose the mode which suits you
You can adjust the mode according to your needs by pressing the volume button. There are 4 options to choose from: High, medium, or low volume, and mute with flash.

Synchronize several devices
The process to synchronize a second pushbutton is exactly the same as the method explained above. You can connect up to eight pushbuttons to one doorbell.
Once you add a ninth, the first one that was connected to your doorbell will automatically desynchronize.

NOTE: A pushbutton can be connected to as many doorbells as you wish.

Resetting the unit

If you want to delete your pairing, open the outdoor unit and press the smal button when the receiver is in pairing mode. You will then hear a double “Ding Dong”‘: This means that synchronization was successful

Linking the doorbell with a DiO 1.0 device

This product is compatible with all DiO 1.0 devices: pushbutton, remote control, switches, wireless detectors … This means that you can personalise your DiO installation according to your needs. For example, when someone rings your doorbell when you are out, your floor lamp, which you have synchronised with our DiO Connect sockets, will immediately light up to create a simulated presence.
More information on our website: https://chacon.com/fr/

Safety tips

• If you do not plan to use the unit for an extended period, such as when you are on holiday, please remove the battery from the transmitter.
• Keep new and used batteries out of the reach of children.
• If the battery compartment does not close properly, stop using the product and keep it out of the reach of children.
• Incorrect use of the battery could damage nearby items and cause a fire or serious injuries.
• If you think batteries might have been swallowed, consult a doctor immediately. Swallowing a battery can have serious consequences: internal burns within two hours, or even death.
• Recycle used batteries in line with environmental protection regulations

Technical specifications

• Radiofrequency: 433.92 MHz
• Transmission range: 150 m (free field)
• Four sound levels: high, medium, low, and mute with flash
• Choice of 38 tunes
• Flashing LED
• Battery (indoor unit): 2 x AA 3V (not included)
• Maximum radio-frequency power :s: 20mW (EIRP)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>