DiO 54515 On/Off Lighting Micro Module for Switch User Guide
- June 3, 2024
- DiO
Table of Contents
54515 On/Off lighting micro module for switch
User Guide
Register your warranty
To register your warranty, fill In the online form at
www.getDlO.com/warranty
Video tutorial
We have produced a series of video tutorials to make it easier to understand
and install our solutions. You can see them on our Youtube.com/c/dio-
connected-home channel under Playlists. You can also view them through our
website Youtube.corts/c/dio-commit-ted-home, in the Support tab.
Installing the lighting module
Warning!! Disconnect the power supply before carrying out any work.
Please contact your electrician if you have any doubts about your
installation.
You can use non-dimmable incandescent, halogen, LED, or ECO bulbs.
Connect the module to your wall switch
- Switch off the power supply.
- Remove the 230V AC live wire and the wire going to your light that is connected to the original wall switch.
- Connect the module to the power supply by connecting the 230V AC live wire to terminal ’14 and the wire going to the light to terminal ‘X’.
- Connect the two white wires of the module to the wall switch.
- Insert the module into the wall plate box and reconnect the power supply.
Linking the module with a DiO 1.0 remote control, switch or DiO 1.0
detector
This product is compatible with all Di0 1.0 devices: remote control, switches,
wireless detectors, and the 010 Smart Home main unit for control using your
smartphone.
Using the DIO main unit, you can control your home wherever you are through
your smartphone and also make your 010 1.0 module compatible with NO 2.0
devices. For more information, visit www.getdio.com.
- Connect your module to the power supply.
- Press the leam button of the Di0 1.0 micro-module once; the LED of the module begins to flash slowly.
- Press the button of the wireless switch or remote control.
- The light connected to the module flashes twice to confirm the link and the LEO stops flashing.
The module can be linked with up to 6 different DIO devices. If the memory Is
full, you should delete it partially or completely to add a new transmitter.
The fighting module can be controlled individually or in conjunction with
other receivers (e.g.: a DiO wireless switch closes the shutter linked to a
DiO module and at the same time turns on the lamp connected to the lighting
module, and the Di0 remote control turns the lamp on and off Individually).
Deleting a DiO 1.0 device
If you want to delete a device:
- Press the learn button of the module device; the LED begins to flash slowly.
- Press the ‘OFF’ button on the device to delete It.
- The lamp flashes twice to confirm the deletion and the LEO of the module stops flashing.
Reset
To delete all registered devices:
- Press the module Warning button for 6 seconds. The LED starts to flash continuously.
- Release the button and press it again.
- The light connected to the module flashes twice to confirm that the module has been reset.
Use
On/Off (unction: Press the ‘f button once to wireless switch on or the ‘0’ button to switch it off.
Troubleshooting
The lighting does not come on when pressing the remote control or switch, or when the detector is activated:
- Check that the module has been installed correctly and that it Is connected to the power supply.
- Check the polarity of the battery (ies) in the device and/or that they are not depleted.
- Make sure that the device is linked to the module.
Your LED or KO bulb does not go out completely, scares or flashes when you turn It off.
- install a bypass in parallel with your lamp that will absorb the residual current that prevents your lamps with very low consumption from turning off completely, and thus allow the total extinction of your lamp.
Important: A minimum distance of 1-2 m Is necessary between two DIO receivers (module, socket, and/or bulb). The range between the module and the Di0 device may be reduced by the thickness of the walls or an existing wireless environment.
Technical specifications
- Protocol: Di0 1.0
- Frequency: 433.92 MHz
- EIRP : 3 mW
- Transmission range: 50 m (in free field)
- Max. 6 associated transmitters
- Operating temperature: -5° to 50°C
- Power supply: 220 — 240 V 50Hz
- Max. Power: – resistive load: 20W — 250W
- LC charge (LED/ECO): 3W — 24W
- Dimensions: 43 x 41 x 13 mm
Supplementing your installation
Supplement your installation with Di0 solutions to control your heating,
lighting, roller blinds, or garden, or to use video surveillance to keep an
eye on what is happening at home. Easy, high-quality, scalable, and
economical…learn about all of the Di0 Connected Home solutions at
www.getDiO.com
Recycling
In accordance with European WEEE directives (2002/96/EC) and directives
concerning accumulators (2006/66/EC), any electrical or electronic device or
accumulator must be collected separately by a local system specializing in the
collection of such waste. Do not dispose of these products with ordinary
waste. Check the regulations in force. The logo shaped like a waste bin
indicates that this product must not be disposed of with household waste in
any EU country. To prevent any risk to the environment or human health due to
uncontrolled scrapping, recycle the product in a responsible manner. This will
promote the sustainable use of material resources. To return your used device,
use the return and collection systems, or contact the original dealer. The
dealer will recycle it in accordance with regulatory provisions.
CHACON declares that device 54515 conforms to the requirements and provisions
of Directive RED 2014/53/EU. The complete text of the EU declaration of
conformity is available at the following Internet address:
www.chacon.be/en/conformity
Hotline
www.getDiO.com
+BE + 32 900 51 100 (Tarif nat. / Nat. tarief : 0.45€/min)
FR +33 1 57 32 48 12 (Prix communication nationale)
ES +34 91 481 63 97 (Precio Comunicacien Nacional)
PT +351 221 450 250 (Preto Comunicacao Nacional)
IT +39 353 36 71 965 (Al prezzo di una telefonata nazionale)
V1.1 190116
Documents / Resources
| DiO
54515 On/Off Lighting Micro Module for
Switch
[pdf] User Guide
54515 On Off Lighting Micro Module for Switch, 54515, On Off Lighting Micro
Module for Switch, Lighting Micro Module for Switch, Micro Module for Switch,
Module for Switch, Switch Micro Module
---|---