ASRock MARS Brand New Small Form Factor

ASRock MARS Brand New Small Form Factor

Safety Information

Your system is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions.

Setting up your system

• Read and follow all instructions in the documentation before you operate your system.
• Do not use this product near water or a heated source such as a radiator. Set up the system on a stable surface.
• Openings on the chassis are for ventilation. Do not block or cover these openings. Make sure you leave plenty of space around the system for ventilation. Never insert objects of any kind into the ventilation openings.
• Use this product in environments with ambient temperatures between 0°C and 35°C.
• If you use an extension cord, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed its ampere rating.

Care during use

• Do not walk on the power cord or allow anything to rest on it.
• Do not spill water or any other liquids on your system.
• When the system is turned OFF, a small amount of electrical current still flow. Always unplug all power, modem, and network cables from the power outlets before cleaning the system.
• IF you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer:
  • The power cord or plug is damaged.
  • Liquid has been spilled into the system.
  • The system does not function properly even if you follow the operating instructions.
  • The system was dropped or the cabinet is damaged.
  • The system performance changes.

No disassembly

IMPORTANT: The warranty does not apply to products that have been disassembly by users.
Battery replacement and disposal
WARNING: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to local regulations.

Product disposal notice

IMPORTANT: This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury- containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

CE Mark Warning

This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Product Specifications

CPU

| AMD Ryzen™ 7 4800U (8C16T, Turbo 4.2GHz)

AMD Ryzen™ 7 4700U (8C8T, Turbo 4.1GHz) AMD Ryzen™ 5 4600U (6C12T, Turbo 4.0GHz)

AMD Ryzen™ 5 4500U (6C6T, Turbo 4.0GHz) AMD Ryzen™ 3 4300U (4C4T, Turbo 3.7GHz)

---|---
GPU|

AMD Radeon™ Graphics

M/B Form Factory/

| Proprietary design (7.0” x 5.7″)

Memory| 2 x SO-DIMM DDR4-3200, Max. 64GB (non-ECC)

M.2 slot

| Supports 1 x M.2 SSD slot

(Support PCIe 3.0×4/ SATA3 type 2260/ 2280

HDD

| Supports 7mm/ 9.5mm 2.5“ SATA HDD or SSD

---|---

WLAN

| Supports M.2 (2230) WiFi/ BT
Audio codec/| ALC233 codec

Power Adaptor

| 65W/ 19V

Front I/O / E/S

| Card Reader (SD/SDHC/SDXC/MMC)1 / USB 2.02 (Quick charge1)/ USB 3.2 Gen1 Type-A2/ USB 3.2 Gen1 Type-C*1

Rear I/O/ E/S

| HDMI1 (2K/4K, 4096×2160p 30 Hz)/ VGA1/

USB 3.2 Gen1 Type-A2/ LAN1/ DC Jack/ Headphone Jack/ Mic-in

HDMI1 (2K/4K, 4096×2160p 30 Hz)/ VGA1/

---|---

LED Indicator

| Power LED (Color: blue)

VESA mount

| Supports VESA standard 100x100mm & 75x75mm

Kensington lock| Reserved at the rear cover

Stand

| 128.7×72.2×24.3mm

---|---

Dimension

| 194mm (L)150mm (W) 26mm (H)

OS

| Windows® 10 64-bit

Safety/EMC Certification

| FCC, CE

ErP/EuP ready (ErP/EuP ready power supply is required)

System Front View

(Quick Charger Support)

3| USB 3.2 Gen1 Type-C Port1
4| Card Reader
5| Base stand screw
6| USB 3.2 Gen1 Type-A Ports2

NOTE:
Quick Charge function work under S5 mode.

• 1 support S3/S4 wake-up function
• 2 support S3/S4/S5 wake-up function

System Rear View

NOTE:

• 1 support S3/S4 wake-up function

Connection Examples (Front)

Connection Examples (Rear)

Vesa Mount/Stand Installation

Installing the VESA Bracket

• Attach the VESA Bracket to the rear of a compatible display using the four screws.
• Choose mounting holes depending on the mounting hole pattern of your LCD screen
  (75 mm × 75 mm or 100 mm × 100 mm).

Installing the Base Stand

Attach the base stand to the unit, then hand tighten the screw.

Key Parts Installation

Removing the Top Case

• Remove the four screws first.

• To remove the top case, place your fingers in the edge as shown in the image below. Then, lift the cover.

Installing the M.2 SSD

1. Unscrew the three screws holding the HDD bracket and the five screws that holding the motherboard.
   

2. Lift the motherboard
   

3. Locate the M.2 Slot on the bottom of motherboard
   

4. Remove the standoff screw and keep this screw for later use.

5. Carefully insert the M.2 SSD into the slot.
   

6. Tighten the screw to secure the M.2 SSD to the motherboard.
   

Installing the HDD

Tighten the four screws to secure the HDD.

1. Pull the release lever out.
2. Place the 2.5-inch hard drive into the bracket.
3. Slide the 2.5-inch hard drive into the connector firmly

References

• dtsc.ca.gov/hazardouswaste/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>