DIGOO DG-CF516 Smart Body Fat Scale User Manual

User Manual
Smart Body Fat Scale
DG-CF516

http://www.healthscale8.com/HealthU/

Please read this manual carefully before using

Body Data Analysis:

| body weight| | body moisture rate| | fat rate| | body mass index
---|---|---|---|---|---|---|---
| bone weight| | visceral fat| | muscle mass| | basal metabolic rate
| lean body mass| | protein| | subcutaneous fat| | heart rate
| obesity grade| | body type| | standard weight| |

Working Principium:

The bioelectrical impedance method uses body muscles and water as conductors to calculate the body’s composition by measuring the body’s bio-resistance. Using this new technology to test the body impedance, it will make the measurement results more accurate.

Product Specification:

1. LED display size:63.5.26mm 2.5’1.02 inches
2. Product size: 280.280.25mm 11.02’11.02’0.98 inches
3. Units: KG/LB (switch in app)
4. Weight capacity: 0.1KG-180KG/396LB
5. Index value: 0.05KG/0.1LB
6. Age: 10 years old or above
7. Height range: 100-220 cm 39.37’86.61 inches
8. Operating temperature / humidity:5°C – 40°C /C90%RH
9. Battery installation: 3*1.5V AAA Battery
10. Product weight: 1.25KG

Using Precautions:

1. Not recommended for pregnant women and users wearing pacemakers or other dangerous equipment to use it.
2. Please use it on flat ground, not on wet and slippery ground.
3. Do not stand on the side of the scale or jump on the scale to avoid falling.
4. Children under 10 years old should not touch this product to avoid injury.
5. When using this product, please keep your feet dry and clean.
6. In order to keep the data accurate, please measure at the same time every day.
7. Do not use this product after strenuous exercise.
8. Do not disassemble this product by yourself.
9. Do not clean the product with water or volatile oil
10. Please put the battery in the right position, if it is not used for a long time, please remove the battery.
11. The test results are for reference only, please not use them as a basis for a diet or fitness plan.

Body Fat Scale Usage Guide:

1. Battery setting.
2. Open the battery cover on the bottom of the scale and insert the battery into the correct battery orientation.
3. When the screen displays “Lo”, the power is too low, please replace the battery in time.

Automatic Shut-down

If there is no operation, the product will automatically shut down within 10 seconds. If the overload maximum range exceeds 2.5kg (5.51 lb), the product will automatically shut down.
Accuracy Deviation:

 Equipment Requirements

Low power consumption Bluetooth 4.2, Android 4.3 and higher version IOS 8.0 and higher version

Installation Notes:

Download and install “Le Shou”

1. Search for “Health U” in the Apple App Store or Android App Store to download and install.
2. Directly scan the QR code below to download and install.

http://www.healthscale8.com/HealthU/

First time true

1. bring the first use, the IOS device will be compatible with the health tool software. You can choose whether it is compatible. Android devices do not have this prompt
2. Enter the App4t personal information prompted, save personal information, ad enter the main interface
3. Connect the device according to the Bluetooth prompt
4. For the fest use you ed to bid a intelligent fat scale
   

Start measurement

1. Place the body fat scale on flat ground during the measurement and stand barefoot on the body fat scale.
2. 3 flashes indicate that the weight value has been measured: when the indicator light of the scale shows “—-“, it indicates that other data is being measured and analyzed, and when the weight value is displayed again on the scale, all measurements have been completed.
3. Click the “Measure” button in the lower right corner, measure the data on the main interface.

View measurement dart.

1. After the measurement is completed, the body data is displayed on the app
2. Click each data to view detailed information.
   

Historical data

1. Click “Weight” on the main interface to view historical data.
2. You can also view historical data in the upper right corner of the curve data.
3. Click each piece of historical data to view the data measured at that time.

User registration

1. “Health U” supports cloud data storage, if you need to store data in the cloud, please register and log in to “Health U”, and make an agreement to disclose all information about your body to “Health U”
2. Register and log in to “Health U”.

Add family members

1. “Health U” allows you and your family to use to manage health.
2. You can add family members by clicking the home screen and adding family users to the settings.

Synchronize data to other applications

1. “Health U” compatible data is synchronized with “Apple Health” and “Google Fit”. “Fitbit” application, the following design shares the “Healthy U” data to other platforms.

Other questions

1. This product is guaranteed for one year. If you have any questions, please contact us: info@lefu.cc.
2. Frequently asked questions about “Health U” can be found in the application FAQ.

Frequently Asked Questions and Answers:

How to recalibrate this product?

• Just step on the scale and turn on the power, step down and return the reading to 0.0kg / 0.01b, and the calibration will be performed automatically.

Why doesn’t the scale work? Why doesn’t the display show data?
Why does the data on the screen disappear in blinking?

• Please check whether the insulation sheet has been removed, whether the battery is installed or the battery is low, and whether it needs to be replaced.

“Err” is displayed when measuring body fat

• Your feet or scales are too wet
• (3961b/180kg) Maximum overload capacity (3961b / 180kg)
• Physical parameters should be set according to height (3’3-7’37 / 100-220cm) and age (10-99 years old).

No fat measurement data was displayed during weighing

• Make sure there are no other Bluetooth connections nearby (except the device you are using)
• Make sure you are barefoot on the electrode pad or ITO conductive glass surface of the scale.
• Make sure the Bluetooth function is turned on.
• Please enter your height information (3′ 3 – 7′ 37 / 100-220cm), age (10-99 years old)

Unable to connect with the application

• Please check your phone model. The application supports Android 4.3 or higher version,
  Android devices support Bluetooth 4.2, IOS devices support IOS 8.0 or higher version

• For Android 5 or higher version, turn on GPS positioning on the phone before the Bluetooth connection (the location information in the app shows “Allow”)

• For 105 11, Bluetooth is turned on on the settings interface, but in fact, it may be turned off on the control interface. Please make sure that the setting interface and the control interface both are turned on.

• If your phone’s Bluetooth is connected to other devices, you need to disconnect them before connecting to this product.

www.mydigoo.com

MADE IN CHINA

Documents / Resources

| DIGOO DG-CF516 Smart Body Fat Scale [pdf] User Manual
DG-CF516, Smart Body Fat Scale
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>