Digoo 433MHz New Door & Window Alarm Sensor User Manual
- June 4, 2024
- DIGOO
Table of Contents
Digoo 433MHz New Door & Window Alarm Sensor
Specifications
- TYPE: 433MHz New Door Window Alarm Sensor
- VOLTAGE: 3V Button Battery
- UNDER VOLTAGE MONITORING: 5 V+/-0.5V
- STATIC CURRENT <=10uA
- TRIGGERING DISTANCE > 20mm
- EMISSION CURRENT <= 15mA
- EMISSION DISTANCE >= 120 m (Open area)
- EMISSION FREQUENCY: 433MHz
- WORKING TEMPERATURE: -10℃ ~50 ℃
Introduction
All DIGOO security systems are compatible with the new Digoo 433MHz door and window alarm sensor. Always keep your family and yourself safe. The anti-theft button will be pressed after the door sensor has been installed. The anti- theft button will release and the alarm will sound when the door sensor is removed.
Digoo is a well-known name in the world of Alarm sensors. This alarm system is one of the best it offers. It comes with certain parts. The anti-theft system and the alarm. It is simple to use and install. It has a high sound sensitivity which means it is loud enough to alarm you in case of any intruder.
What’s in the Box?
- 1 x DIGOO 433MHz New Door & Winder Sensor
How does the alarm system work?
The door sensor is installed against the door, and the anti-theft button is installed at the mounting of the door. When the sensor is removed from against the button, it will be triggered.
How is the low battery indicated?
The door sensor will send a warning to your phone and the security system when its battery is running low so that you may quickly replace the battery
How to turn on the alarm system?
By adding an ON/OFF button, you can conserve energy by turning the electricity off when it’s not needed.
When compared to the old door sensor, the new model’s ability to last for two years and an increase in connection distance from 100 to 150 metres.
Frequently Asked Questions
What are door and window sensors?
Typically, a magnetic contact sensor with two pieces is used as a door or window sensor. The two magnetic sensors are separated from one another when the system is armed and a door or window is opened, causing the alarm.
Is motion detector better than door and window sensor?
Window sensors work better at catching the initial entry attempt than motion detectors do at seeing an intruder after they’ve already entered.
Are door alarm sensors universal?
Unlike wireless sensors, which are brand-specific, hardwired sensors and detectors are not. As they are universal, they are compatible with all types of hardwired alarm system, including those made by DSC, Honeywell, GE, Napco, and others.
Do door sensors need Wi-Fi?
Instead of using WiFi or cellular technology, door and window sensors interact with an alarm control panel through an RF frequency.
Should you put a sensor on every window?
No, every window does not require a sensor. Put them on windows that are on the ground floor and those that you think an intruder could use. Additionally, you want to position them on any windows you want to keep an eye on in case a daring teen or someone else inside the house tries to escape.
Do I need door sensors if I have motion sensors?
Yes, even with door/window protection, you still need motion sensors.
Are window sensors worth it?
Unique and very practical additions to any home security system are glass break sensors. They are inexpensive and can stop a burglar before they cause more harm. If you don’t already have one, think about purchasing one since it might be the last component needed to finish your home security system.
Are all alarm sensors compatible?
Wired security sensors are not compatible with all security systems. With a wired to wireless translator like the 5800C2W, some wireless systems can connect to wired devices. You should confirm that the contacts being placed are compatible with a wired security system.
Should you put window sensors on second floor?
The window over the sink and the windows on the second story are both alarms from a reputable security firm. Many windows are susceptible to glassbreak sensors, and second-story windows that are easily accessible are particularly weak. You’re struggling with your umbrella in the rain and neglect to lock your door.
Can an alarm system work without internet?
Similar to a cell phone, these home security systems use particular radio frequencies to stay in touch with cellular transmitters during outages. Internet interruptions have no impact on cellular connectivity. If the internet goes down, a system with cellular backup keeps all of your alerts operational.
How do wireless door sensors work?
The majority are a form of contact sensor that works with a magnet and reed switch. The magnet keeps the reed switch circuit shut off when the door is closed. The reed switch circuit opens when the door opens and the magnet is taken out, sounding a warning or alarm.
Where should a security door sensor be placed?
The top corner of the door’s opening side is a nice place to put something. The contact (bigger piece) should be attached to the door frame, and the magnet (smaller piece) should be attached to the door.
How do window sensors work?
Similar to door sensors, window sensors function by employing a magnet and a reed switch. The magnet is attached to the window itself, and the reed switch is attached to the window frame. The magnet pulls away from the reed switch when a window with an active sensor is opened, and the alarm sounds.
Where should alarm sensors be placed on windows?
The best way to mount a door and window sensor is with the magnet on a level surface, with half of it on the door or window and the other half on the frame. As long as the two parts are close to one other, it usually doesn’t matter which half goes where (within an inch or two).
How many alarm motion sensors do I need?
You might just want one motion sensor, depending on the size and configuration of your basement. One sensor in the corner of the room might monitor a 90-degree angle and detect motion as far away as 40 feet, even if your basement is bigger and more open.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>