DENVER Bluetooth Speaker BTL-62 Instruction Manual

June 6, 2024
Denver

DENVER-logo

Instruction Manual
Bluetooth Speaker
BTL-62

DENVER Bluetooth Speaker BTL 62-

www.denver-electronics.com
Before operating this product, please read this
instruction manual carefully and completely.

Operation Instruction

When you turn on the speaker, it will by standard start in Bluetooth model. You can then easily pair with your smartphone or PC with Bluetooth function. If you don’t pair it within 10 minutes, the speaker will go into sleep mode, and you have to turn it off/on to pair again. Press “ M ” button to switch functions.

DENVER Bluetooth Speaker BTL 62-Operation

Button Instruction :

  1. : Power Key
  2. LINE port: 3.5 audio input port
  3. Play/Pause: Pause and play in play mode.
  4. Volume down/Next: Long press to decrease volume. In FM mode, short press to switch PRE frequency. In music mode, short press to switch the previous song.
  5. + Volume up / PRE: Long press to increase volume, In FM mode, short press to switch to next frequency, In music mode, short press to switch to the next song
  6. M – mode switch: switch to FM radio mode, in “FM” mode, long press 3 seconds to Tune.
    (Note: short press=hold the key for less than 1 second, Long press=hold the key for about 3 seconds)

Light control button:

DENVER Bluetooth Speaker BTL 62-Light

DENVER Bluetooth Speaker BTL 62-Light1

How to turn ON and OFF

Long press the key to turning ON and long-press the key to turning OFF.

How to connect Bluetooth devices (Mobile Phone/Laptop/iPhone/iPad, etc.)

  1. Turn on the speaker and make sure it is in  Bluetooth mode. The blue indicator flashes and a beep sound.
  2. Enter Bluetooth settings on your smartphone or PC, find BTL-62 on the list over Bluetooth units, and choose it to pair.
  3. After successfully paired, the speaker will give a beep, and on your phone, it will show that the speaker is connected.
  4. After successful connection, Bluetooth devices can play to the speaker. Blue light will flash slowly when it is in Bluetooth play mode.

How to use AUX input mode.

In any mode, insert 3.5mm to the Bluetooth speaker, and to the audio source you want to listen to. The Bluetooth speaker will automatically change to AUX input.

How to operate FM radio

Press M to enter FM mode. Then long press M to make automatically search for channels. The blue indicator flashes. When finished, the system will automatically play the first found station. Short press + or to change stations.
Note: Please insert a USB cable for better FM receival. It works as an antenna.

How to charge the speaker

Please charge the speaker before first-time use. Plug one part of the USB charge cable into the speaker Micro USB port, and the other part to a computer USB port or an external USB adaptor  (not included). Charging the battery fully may take up to 6 hours (first time please extend charging time). When charging has finished the red indicator will turn off.

FAQ Cannot connect and play

  1. Check Bluetooth settings on your phone or PC. (Some PC’s cannot be used for Bluetooth audio)
  2. Check if the speaker are properly charged. If the red indicator flashes when you turn on the speaker, please charge it.
  3. Please turn off, pair the Bluetooth unit again, and try once more.

*If the above doesn’t solve your problems, please contact the store where it is bought.

Bad radio reception

  • Research the station at an open place
  • Insert USB cable as an external antenna to enhance reception

Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER
ELECTRONICS A/S

DENVER-logo

www.denver-electronics.com

Electric and electronic equipment and included batteries contain materials, components, and substances that can be hazardous to your health and environment if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries are marked with the crossed- out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed with other household waste, but should be disposed of separately.
As the end-user, it is important that you submit your used batteries to the appropriate and designated facility. In this manner, you make sure that the batteries are recycled in accordance with the legislature and will not harm the environment.
All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites or be collected from households. Additional information is available at the technical department of your city.
Hereby, Inter Sales A/S declares that the radio equipment type BTL-62 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.denverelectronics.com, and then click the search ICON on a topline of website. Write model number: BTL62. Now enter the product page, and a red directive is found under downloads/other downloads. Operating Frequency Range: 2.402-2.480 GHz Max Output Power: 2.06 dBm

Warning: Lithium battery inside
Imported by:
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics

Documents / Resources

| DENVER Bluetooth Speaker BTL-62 [pdf] Instruction Manual
DENVER, Bluetooth, Speaker, BTL-62
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Denver User Manuals

Related Manuals