LINPA T3 Bluetooth Wireless Earbuds User Manual
- June 6, 2024
- LINPA
Table of Contents
Bluetooth Wireless Earbuds
Linpa T3
User Manual
TO ACTIVATE YOUR 12+6 MONTHS WARRANTY
PLEASE VISIT NOW
Facebook: @LinpaOfficial
CUSTOMER SERVICE
support@linpaworld.com
If the earbuds freeze due to misuse, please press and hold the earbuds for 10 seconds to reboot the earbuds. Or email support@linpaworld.com for help.
Connection
Pair with Your Device:
Choose “Linpa T3”
Taking the earbuds from the charging case, the left LED lights flash red and
white, the right LED lights off.(Make sure tear off ransparent static sticker
on the bottom of the earbuds)
Connected
The LED light off
Tips:
- The earbuds will turn off automatically if there is no connection within 5 minutes after power on.
- The earbuds will automatically turn off if there is no playback within 30 minutes after pairing.
- The earbuds will turn off automatically within 5 minutes when turn off the device Bluetooth after paring.
Pairing Issues
The left and right sides can be used separately. The right earbud is the
secondary, which will take a little longer to connect.
When one side works, how do I switch my earbuds from single mode to stereo
mode?
Step 1: Put them back to the case.
Step 2: Delete “Linpa T3” from Bluetooth menu on your device, if your
device has been connected “Linpa T3” .
Step 3: Taking the earbuds from the charging case, both earbuds turn on,
the LED lights flash red and white, Double-click any earbud, the two earbuds
will be forced to pair. After the two earbuds are successfully paired, the
left light turns off and the right alternately flashes red and white.
Step 4: Turn on the phone’s Bluetooth and choose “Linpa T3” to pair. The
earphones will automatically pair with the phone afterwards.
Step 5: If prompted, enter code “0000”.
Controls
Music
Short press : Play/pause songs
Double click(Left) : Previous track
Double click(Right) : Next track
Calling
Press : Answer/End Call
Long press : 2 seconds Reject the call
Long press : 1 second Reject third party calls
Double click : Connect a new call while retaining the current call
Three-party call : Double-click to switch between the second party and the
third party, and there is a ‘didi’ prompt when switching calls.
Activate Siri/Other Voice Control Software
Connected to your phone/device : Long press for 2 seconds and other voice assistants
Turn On/Off
Take the earbuds from the charging case, it will automatically turn on. Or manually press 1s in the off state : Red and white lights flash alternately 3 times
Long press 5 seconds : Red lights flash 3 times
Charging
- Please check the power adaptor if it is 5V with good quality. [Please don’t use 6V, 9V or 12 V Chargers to avoid risk of burning the chip]
- Clean the thimble and contacts with alcohol to ensure that the headphone charging contact is conductive.
Earbud status indicator
FAQ
Q: The sound quality of the headphones is not good?
A: For all of the headphone products, they need a period of use to get better
sound quality. Some components, such as diaphragm unit, transistors,
integrated circuits, and capacitance, and can be stabilized after a period of
use.
Q: Why cannot synchronize the volume?
A: Our products are mainly compatible with iPhone, Samsung, and other
mainstream mobile phones, Due to too many Android systems, our headsets cannot
match all types of Android systems. If the volume cannot synchronize, please
manually adjust the volume on the phone or computer.
Q: How to keep clear calls?
A: When using with a phone call, please turn the volume to the maximum to
avoid making calls in noisy environments, such as subways and buses. These
places will affect the signal connection and stability of the earbuds.
Q: How to deal with the stuck signal of the earphone?
A: The Bluetooth headphones use the 2.4G frequency band. When it encounters
wifi and the base station signal environment is complex, it will automatically
switch to the most suitable frequency band. To avoid the frequency hopping,
Please use your mobile phone as close as possible to the headphones.
Attention
-
The headphone buttons have 3M glue, please do not buckle the button of the headset
to avoid falling off -
Do not store the earphone in extreme temperature(under 0 or over 45).
-
Do not use this earphone during a thunderstorm to avoid irregular function and
increased risk of electric shock. -
Do not use harsh chemicals or strong detergents to clean the earbuds.
-
Keep the earbuds dry
Maintenance:
Since our product has a built-in battery, and the battery itself has power consumption issues, please make sure to charge the headset and charging box once a week to prevent the protection board from protecting itself and causing the battery to run low.
Specifications
Model: Linpa T3
Standby Time: One year
Talk/Playing Time: 50 hours (50% volume)
Bluetooth Standard: V5.0
Frequency Range: 2.4GHz
Operating Range: 33 feet/10 meters (No obstacles)
Earphone Battery/Charging Case: 100mah/450mah
Charging Time (Earphones/Charging Case): 2 hours/1.5 hours