HOLLYLAND Mars400s Wi-Fi Connection User Guide
- June 6, 2024
- HOLLYLAND
Table of Contents
HOLLYLAND Mars400s Wi-Fi Connection User Guide
Device Version
- The firmware version of the device should be higher than V2.0.3.1
- APP version Higher than V2.5.1
- Firmware download Path for Mars 400S:
Link:
https://drive.google.com/open?id=16KOGRNC3NNF1fXYeVy7PoF4kXAuuNP1j
Wi-Fi Connection
APP Connection
FAQ
-
Could we still use the way to scan the code to connect to the Wi-Fi after the firmware upgrade?
A： After the firmware upgrade, It is still available for the 400S to scan the code or manually input the Wi-Fi SSID to get the Connection. -
How could we check the certain Wi-Fi password?
A： By holding the botton in the middle of the Tx/Rx, then Select the Option WI-FI PASSWORD -
For the Mars 400s, I could not find the certain option Wi-Fi password?
A: This feature is only available for the firmware version higher than V 2.0.3.1 -
For the Mars400s, Could we change the Wi-Fi password?
A: It is not supported yet, it will be available in the further App update. -
For the Mars400s,will it still work if I only upgrade the App version instead of the firmware version?
A: It will still work, without upgrading the firmware version, you could still make the Wi-Fi connection by scanning the Code or manually input the Wi- Fi SSID. Other features like Recording, Monitoring, will be still available. But, you will be unable to check the Wi-Fi password.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>