atomi AT1393 Bluetooth Shower Head User Manual
- June 6, 2024
- atomi
Table of Contents
atomi AT1393 Bluetooth Shower Head User Manual
Thank you for purchasing the atomi Bluetooth Shower Head
Make your shower a little more lively with the atomi Bluetooth Shower Head. Get your groove on or listen to the latest weather and traffic before you start your day. The atomi Bluetooth Shower Head also lets you answer phone calls!
High quality and great sounding, your shower will be rockin’ with the atomi Bluetooth Shower Head!
Inside the box you’ll find
- atomi Bluetooth Shower Head
- Micro-USB cable
Powering on and Pairing the Bluetooth Shower Head
The atomi Bluetooth Shower Head has only one button, the power button.
To turn the atomi Bluetooth Shower Head ON: Press the power button for 2 seconds.
To turn the atomi Bluetooth Shower Head OFF: Press the power button for 2 seconds.
To pick up or end a call: Short press the power button
Volume is controlled only by the device connected to your Bluetooth Shower Head.
To pairthe atomi Bluetooth Shower Head with your device:
-
Make sure your device has Bluetooth® capability.
-
Turn the atomi Bluetooth Shower Head on.
-
Watch for the power button to fast-flash in blue, indicating that it’s in pairing mode.
-
Follow the instructions of your device to pair the unit.
-
Pair your device by selecting atomi Bluetooth Shower Head from the Bluetooth® listing on your device or by selecting YES. When successfully connected, you will hear three beeps and the power button on the atomi Bluetooth Shower Head will go steady blue.
-
Press play on your device and use controls on it to adjust desired volume.
Charging the Bluetooth Shower Head
Pull the speaker from the Bluetooth Shower Head to detach it. The charger is located on the back of the speaker. Charge by using the USB to Micro USB cord (included) with a computer or AC adapter with USB jack (not included).
Power indicator
-
Blue slow flashing (2s): Low battery
-
Steady Red: Charging
-
Indicator off: Fully charged
NOTE: Please allow approximately 3 hours for full charge. Battery will last up to 6 hours when connected wirelessly. IMPORTANT: Do not overcharge the battery for long periods, as it could damage the battery.
Built in Microphone
The atomi Bluetooth Shower Head is equipped with a built-in microphone, for easy hands-free talking:
- Make sure the atomi Bluetooth Shower Head is successfully paired with your device.
- To answer or end a call, simply press the power button one time when you hear a ringtone.
- To reject an incoming call, press and hold the power button for 2 seconds.
NOTE:
When an incoming call is detected, the atomi Bluetooth Shower Head will pause
the music and a ringtone will sound. After the call is terminated, the music
will resume to play automatically where it left off. When making a call, use
your phone to dial and the atomi Bluetooth Shower Head will automatically go
into hands free mode.
Note
- Once you have successfully paired your device, you may not need to repeat the above steps.
- When pairing with a computer, please consult your computer manufacturer for Bluetooth® pairing instructions and/or the latest Bluetooth® Drivers.
- Keep all non-water-resistant devices (phones, mp3 players, etc.) in a dry place where they will not come in contact with water.
- A pairing code is not required.
- The atomi Bluetooth Shower Head will automatically power off after 10 minutes of inactivity (no Bluetooth connection / no play)
Safety Information
- Read these instructions carefully for best use.
- DO NOT use the Bluetooth Shower Head near open flames, such as candles, heat sources, radiators, and stoves.
- Only clean the Bluetooth Shower Head with a dry cloth.
- Caution: Risk of electric shock.
- For connection to a power supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.
- Please check before use, if the output voltage and current of the power supply are suitable for the product.
- Children should be supervised to ensure that they do not play with the appliance. THIS IS NOT A TOY.
- Use this product only for its intended use as described in this manual.
- atomi is not liable for any damage caused to smartphones, iPod®/MP3 player or any device.
- Never operate this product if it has a damaged cord, plug, cable or housing.
- Only set on dry surfaces. Do not place on surfaces wet from water or cleaning solvents.
Specifications
Battery: 500mAh
Speaker: 3W
Waterproof: IPX4
Bluetooth name: atomi Shower Head Speaker
FCC Warning
NOTE: This device complies with 15 of the FCC Rules. Operation is subjected to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operations.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to paL 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
inte erence in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful inte erence to radio
communications. However, there is no guarantee that inte erence will occur in
a paLicular installation. If this equipment does cause harmful inte erence to
radio or television reception, which can be determined by turning the
equipment off and on.
Operation is subject to the following two conditions: (1) this device may not cause harmful inte erence, and (2) this device must accept any inte erence received, including inte erence that may cause undesired operation.” The instruction manual shall include, “Warning: Changes or modifications to this unit not expressly approved by the paLy responsible for compliance could void the user’s authority to operate the equipment.” “NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to PaL 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inte erence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful inte erence to radio communications. However, there is no guarantee that inte erence will not occur in a paLicular installation. If this equipment does cause harmful inte erence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inte erence by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.” Date Code: 10/19
For questions or concerns, email us at info@atomiusa.com
Manufactured and marketed by Atomi Inc. 10 West 33rd St., New York, NY 10001 atomi™ is a trademark of Atomi Inc.
Designed by atomi in New York. Made in China
One-year limited warranty from the date of purchase against defects in material and workmanship.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>