NUARL N6 Mini 2 Bluetooth Truly Wireless Stereo Earbuds User Manual
- June 6, 2024
- NUARL
Table of Contents
N6 Mini 2 Bluetooth Truly Wireless Stereo Earbuds
User Manual
Product Diagram
*Please choose and replace Ear tips to suit your preference.
Before Use
Remove Insulating Sheet
Remove Insulating sheet from the backside of earbuds.
Battery Charge
Insert USB type A connector of USB Charge Cable to USB AC charger or USB port
of PC, and insert Type C USB connector to the USB port of Charging Case.
Put the Ear Buds into the Charging case.
While charging, the LED light constantly.
When charging is completed, the LED will turn off.
Power
On/Power Off
Put the Ear Buds into Charging Case, Ear Buds power OFF automatically.
When picking up the Earbuds, power ON automatically.
*When the Case battery is low, this function does not work.
Pairing
Pairing
To use Ear Buds the first time, you must pair Ear Bud with a mobile phone or
player.
Once your Ear Buds are paired with other devices, they will remain paired and
automatically recognize each other.
[First time to use]
- Turn on the Bluetooth function of your mobile phone.
- Turn on the power of both earbuds.
- Select “NUARL N6 mini2 SE” in the discovered device list of the phone.
- Click “Pair” on the phone display.
[Re-pairing or Pairing with second mobile phone]
- Turn on the Bluetooth function of your mobile phone.
- When Earbuds is not connected to any other device, the LED indicator will blink alternately in white and orange after 6 seconds.
- Select “N UARL N6 mini2 SE” in the discovered device list of the phone.
- Click “Pair” on the phone display.
Charging Case
Charge Case Battery
Insert USB type A connector of USB Charge Cable to USB AC charger or USB port
of PC, and insert Micro USB connector to the USB port of Charging Case.
Depending on the battery level, the number of lit LEDs will change.
When put on the earphones with no charger cable connected, the LED lights up for about 3 seconds to show the battery level.
Auto Power ON/OFF
Put the Ear Buds into Charging Case, Ear Buds power OFF automatically.
When picking up the Earbuds power is ON automatically.
*When the Case battery is low, this function does not work.
Ambient Mode
This device is equipped with an Ambient mode that allows you to listen to
ambient sounds from the microphone.
When the wind hits the earphones with the Ambient mode enabled, wind noise can
be heard. This is not a product defect.
Gaming Mode
By enabling the gaming mode, you can reduce the audio delay in relation to the
video.
However, sound quality and Bluetooth stability may be degraded while in gaming
mode.
Meaning of LED
Power ON | White 1 Second |
---|---|
Charging | Orange |
Disconnected | White 2time each 3Seconds |
Connected | White 1 time each 7Seconds |
Music Play/Talking | No Flash |
Low Battery | Orange 1 time each 3Seconds |
Pairing | Flashing White and Orange |
Button Operation
| | L| R
---|---|---|---
Power| ON| Long press 2seconds| Long press 2seconds
Music| Play/Pause| 1 Tao
Next Track| –| Long press 1 Second
Previous Track| Long press 1 Second| –
Volume| Volume Up| 2Tap| –
Volume Down| –| 2Tap
Phone| Answer Call| 1 Tap
Hang Up| Long press 1 Second
Reject Call| Long press 2seconds
Ambient Mode| ON/OFF| –| 3Tap
Gaming Mode| ON/OFF| 3Tap|
Siri/GA| Start| Long Press 1 sec without Music play| –
Pairing Mode| Start| 3Tap without connection
Frequently Asked Questions
Q)Suddenly I heard no sound from one earbud.
A)Please turn off the earbud and turn on it again.
Q) The white LED lamp of the earphone is continuously blinking.
A) With the earphones on the side that is not blinking continuously white, put
the earphones in the charging case, press and hold for about 10 seconds, then
double-tap and remove it from the case.
When the continuous white flashing of both earbuds stops, try pairing them
with the phone again.
Q) Bluetooth connection has dropped.
A) Please delete INUARL N6 mini2 SE_j from the Bluetooth device list and pair
with your device again.
Q) The pairing between Land R earbud has dropped.
A) Turn off both earbuds and turn on them again.
Q) When I place the earbud in the case, it won’t turn off itself.
When I get the earbud out from the case it won’t turn on.
A) While the case’s power is low, the automatic on-off function will not be
active. Please turn on/off it manually.
Q) I want to know about warranty and repair outside of Japan.
A) The warranty for this product is valid for 1 year from the day of purchase.
During the warranty period, we will repair the product. The warranty is only
valid in the country in which the product was purchased. Please contact the
purchased store directly for the specific repair of the goods.
Specification
Product Specification
Driver| ØD6mm NUARL DRIVER[N6]v5
Frequency Response| 20~20,000Hz
Power| Earbuds: 3.7V/50mAh Li-Po Battery Charger Case: 3.7v/400mAh Li-Po
Battery
Continuous Playtime (Max)| 8hours(SBC/AAC) / 5.5hours(aptX)
Total Playtime (Max)| 32hours(with Charger Case)
Charging Time (Min)| 1.5hours
Bluetooth Specification| Version5.2/Class2/Multi-Pairing(4)
Bluetooth Codec| aptX, MC, SBC
Bluetooth Profile| A2DP, HFP, HSP, AVRCP
Bluetooth Passkey| 0000
Microphone| cVc NC/Ambient sound combined use x 2
Waterproof Level| IPX7
Operation Temperature| 5~50°C
Accessories| Charger Case, Charging Cable, Earpieces, User’s Guide
Certification| R210-162716 / FCC / CE
Federal Communications Commission Part l 5
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. in
portable exposure conditions without restriction.
Copyright © MTI Corporation All rights reserved. Aug. 2021