NUARL N6 GB TWS Wireless Stereo Earphones User Guide
- June 3, 2024
- NUARL
Table of Contents
NUARL N6 GB TWS Wireless Stereo Earphones
Specification
- BRAND: NUARL
- COLOR: GB (GROSS BLACK)
- FORM FACTOR: In Ear
- WIRELESS COMMUNICATION TECHNOLOGY: Bluetooth
- DIMENSIONS: (Earbud x1) W26.0 x H30.0 x D20.0mm, (Charging case) W72.0 x H37.0x D38.5mm
- WEIGHT: (Earbud x1) 7g (Charging case) 45g
- DRIVER: φ6mm PTT Multilayer diaphragm NUARL DRIVER [N6] v3 *with HD SS
- CONTINUOUS PLAYTIME: about 11hr. (55hr. when used with charging case) (SBC/AAC)/about 8hr. (32hr. when used with charging case) (aptX)
- RECHARGING TIME: 5 hr.
- BLUETOOTH SPEC.: , 5.0 / Class 2 / Multi-pairing (4)
- PROFILE: A2DP, HFP, HSP, AVRCP
- CODEC: aptX, AAC, SBC
- MICROPHONE: Omni-directional / cVc noise canceling installed
- WATER RESISTANCE LEVEL: IPX4
Introduction
The “NUARL DRIVER [N6] v3” is used by N6. TPE (Thermoplastic Elastomer) and titanium film deposition to form a “PTT multilayer diaphragm vibrating plate” show a clear and powerful wide sound field on the rigid and flexible surface of a PEEK (Polyetheretherketone) diaphragm. Tuning that combines analogue and digital The driver had been stored in a metal case and modularized using the expertise developed in the development of pure audio earphones to enable the same analogue toning as wired earphone. We achieved connection stability that resists sound interruption as a future wireless earbud by utilizing Qualcomm’s Bluetooth SoC “QCC3020.”
Over 11 hours of continuous playback on a single charge, 8 hours when playing aptX audio. It has Playback of music for up to 55 hours when using the charging case. On one side, all operations are feasible. Common inline 3 buttons are used on both sides by N6 and N6PRO. The controls for your smartphone are the same on both sides of the buttons.
ORIGINAL DYNAMIC DRIVER “NUARL DRIVER N6”
A special magnetic circuit in the 6.0mm dynamic full-range driver “NUARL DRIVER [N6],” which employs the highest-grade neodymium magnet, prevents thermal demagnetization brought on by prolonged operation. Despite its diminutive size, the speaker produces a loud, clear sound with a sharp start.
COMBINING ANALOG AND DIGITAL TUNING
The driver had been stored in a metal case and modularized using the expertise developed in the development of pure audio earphones to enable the same analogue toning as wired earphone. Additionally, we fully utilize the SoC’s integrated DSP by combining this module with digital toning to achieve an unheard-of level of delicate sound quality tuning.
HOW TO PAIR
Open the charging box lid; the earbuds enter into the pairing mode automatically. Turn On the Bluetooth of your device and search for “NUARL-N6” earbuds. Tap connect.
HOW TO CHARGE THE CHARGING CASE
Connect the charging USB cable into your computer’s USB port and connect micro USB to the device. LED light flashes indicating that your device is charging.
HOW TO CHARGE THE EARBUDS
Place the earbuds in charging case. Make sure to put right earbud in slot R and left earbud in slot L. LED light turns on showing that the earbuds are charging.
FAQs
Why does one TWS earbud work but not the other?
One earbud not working can be caused by a variety of problems. Some issues can be resolved easily, such as Bluetooth pairing issues or devices that just require cleaning or resetting.
How can the song be changed on TWS earbuds?
To play the next track, tap and hold the right earbud for two seconds. To play a previous track, tap and hold the left earbud.
Why won’t my TWS pair?
Your device’s Bluetooth setting should be disabled. Earbuds will automatically turn on when you remove them from the case. To manually sync them, double- press the left and right earbuds at the same time.
Why won’t TWS connect?
If your TWS earbuds are sufficiently old, they may not be repairable, in which case your battery may be dead.
How do I change the TWS volume?
The volume increases when you tap and hold the right earbud; it’s a neat feature. The volume decreases when you tap or hold the Left.
My wireless earbuds won’t connect; why?
Try completely unplugging and replugging the earbuds. If you still have trouble pairing your earbuds, check the manual to see what it suggests. Some earbuds may have a fail-safe hard reset mode.
Can you use just one earbud without the other?
Yes, you can take calls or listen to music in mono using just the right earbud.
Why is the red blink on my TWS?
Your headphones’ red or amber flashing usually indicates that the battery is getting low.
How can I resolve a Bluetooth pairing issue?
Open the Settings app on your phone. Click Connected devices. Tap “Bluetooth” if you see it. Tap the option if you see Previously connected devices.
Why is the volume on my earbuds so low?
Your wireless earbuds’ volume may vary depending on the state of your battery. The earbuds will automatically lower the volume when the battery is low to save energy.
Suppose I misplaced an earbud.
If one of your pair’s earbuds is broken or missing, you’ll need to buy a replacement.
Why can’t Bluetooth locate devices?
Go to Settings > System > Advanced> Reset Options > Reset Wi-Fi, mobile, & Bluetooth on Android devices.
Without a case, how do I charge my earbuds?
Using a USB port on your laptop or desktop computer is another way to charge your wireless earbuds without a charger. Simply plug in your earbuds to the USB port with a USB cable to start charging them.
Can I only use my left earbud?
Yes, you can use the right or left earbud separately to make or receive calls or to play music.
Can you use wireless earbuds to make phone calls?
Nowadays, a microphone can be found in almost all wireless earbuds and headphones.