NUARL N10 Plus ANC Truly Wireless Stereo Earbuds User Manual

NUARL N10 Plus ANC Truly Wireless Stereo Earbuds

Product Diagram

Before Use

Remove Insulating Sheet
Remove Insulating sheet from back side of earbuds.

Battery Charge

• Insert USB type A connector of USB Charge Cable to USB AC charger or USB port of PC, and insert Type C USB connector to USB port of Charging Case.
• Put the Ear Buds into Charging case.
• While charging,the LED light constantly .
• When charging is completed, the LED will turn off.

Power On/Power Off
Put the Ear Buds into Charging Case , Ear Buds power OFF automatically. When pick up the Ear buds, power ON automatically.

• When Case battery is low, this function does not work.

Pairing

To use Ear Buds first time, you must pairing Ear Bud with mobile phone or player. Once your Ear Buds is paired with other devices, they will remain paired and automatically recognize each other.

[First time to use]

1. Turn on Bluetooth function of your mobile phone.
2. Turn on the power of both earbuds.
3. Select “NUARL NlO Plus” in discovered device list of the phone.
4. Click “Pair” in the phone display.

[Re-pairing or Pairing with second mobile phone]

1. Turn on Bluetooth function of your mobile phone.
2. When Earbuds is not connected to any other device, the LED will blink alternately in white and orange after 8 seconds, or by double-clicking the main button.
3. Select “NUARL NlO Plus” in discovered device list of the phone.
4. Click “Pair” in the phone display.

Charging Case

Charge Case Battery
Insert USB type A connector of USB Charge Cable to USB AC charger or USB port of PC, and insert Type C USB connector to USB port of Charging Case.
While charging,the Orange LED(Center) light constantly. When charging is completed, the LED will turn off. When put into earbuds and the cover is closed, the charging indicator flash for about 3 seconds depending on the remaining battery level in the charging case.

Auto Power ON/OFF
Put the Ear Buds into Charging Case, Ear Buds power OFF automatically. When pick up the Ear buds power ON automatically.
When Case battery is low, this function does not work.

Multipoint Connection

• This product supports Multipoint connection, which allows you to connect to two devices simultaneously. To use the Multipoint connection, the second device must be paired with this product in advance.
• The maximum number of devices that can be connected via Multipoint connection is two.
• Music can be played back on either of the connected devices. However, you cannot play music from both devices at the same time.
• Also, when one device is playing, operating the other device will not switch the music.
• Please stop playback and then operate the other device.

Meaning of LED

Button Operation

Main Button

| L| R
Power| ON| lClick| lClick
OFF| Lon g pr essuntil beep 2 tim es| Lon g pr essuntil beep 2 tim es
Music *| Pla y/ Pause| lClick
Next Track| 2Click|
Previous Track| 3Clic k|

Volume

| Volu me Up| | 3Clic k
Volume Down| | 2Click

Phone

| Answer Call| lClick
Han g Up| lClick
Reject Call| Long press 2seconds

Pairing g

| Forced Pairin g| 2Click with no connection
Clear| Long press Main button Seconds until beep 3times, then 2Click
Siri/Google| Start| Long press the Main button until a beep without music play

• Button operation may not work depending on the app.

Active Noise Canceling (ANC)

• This product equipped with active noise cancellation (ANC).
• Each time you press the sub-button, the function switches from ANC to Ambient and then to Off.
• This product’s active noise canceling function uses microphones to capture external noise.
• It captures sound and digitally reduces unwanted noise.
• The effectiveness level of active noise cancellation can be changed in the NlO CONNECT app.

Ambient Mode

• This product is equipped with an Ambient mode that allows you to listen to ambient sounds from the microphone.
• The operation settings for Ambient sound function can be changed with the NlO CONNECT app.
• When the wind hits the earphones with the Ambient mode enabled, a wind noise can be heard. This is not a product defect.
  *ANC and Ambient sound cannot be used at the same time.

Gaming Mode

• By enabling the gaming mode, you can reduce the audio delay in relation to the video.
• However, sound quality and Bluetooth stability may be degraded while in the gaming mode.

N10 CONNECT APP

The NlO CONNECT app (free of charge) allows you to get the most out of this product. You can customize various features, update the firmware and more.
Download the app by searching for “NlO CONNECT” in the Apple App store or Google Play store.

Main features

• Adjust the ANC effect level.
• Operation Settings for External Sound Intake
• Volume level setting
• CODEC switching
• Button setting
• Firmware update

*The function of the app may change with the version up.

Frequently Asked Questions

• Q)Suddenly I heard no sound from one earbud.
  A)Please turn off the earbud and turn on it again.

• Q) Bluetooth connection has dropped.
  A) Please delete rN UARL Nl0 PlusJ from the Bluetooth device list and pair with your device again.

• Q) The pairing between Land R earbud has dropped.
  A) Turn off both earbuds and turn on them again.
  A)Please try to “Clear” pairing as page 18.

• Q) When I place the earbud in the case, it won’t turn off itself.
  When I get the earbud out from the case it won’t turn on.
  A) While the case’s power is low, the automatic on-off function will not be active. Please turn on/off it manually.

• Q) The case has run out of charges.
  A) The case will discharge itself, please recharge the case regularly.

• Q) I want to know about warranty and repair in outside of Japan.
  A) The warranty is only valid in the country in which the product was purchased. Please contact the purchased store directly for the specific repair of the goods.

Specification

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>