NUARL N6PRO2 BR True Wireless Stereo Earphones User Guide
- June 3, 2024
- NUARL
Table of Contents
NUARL N6PRO2 BR True Wireless Stereo Earphones
Specification
- BRAND: NUARL
- COLOR: BR (Bordeaux)
- FORM FACTOR: In Ear
- CONNECTIVITY TECHNOLOGY: Bluetooth
- SIZE: Body = W26.0 x H30.0 x D20.0mm, approx. 7g / Charging case = W72.0 x H37.0 x D38.5mm, approx. 47g
- CONTINUOUS PLAYBACK TIME: Approximately 10 hours (SBC / AAC), Approximately 8 hours (aptX Adaptive / aptX)
- TOTAL PLAY TIME: 40 hours or more (combination with charging case)
- CHARGING TIME: About 1.5 hours
- BLUETOOTH CONNECTION: 2 / Class2 / 4 multi-pairing
- PROFILE: A2DP, HFP, HSP, AVRCP
- SUPPORTED CODECS: aptX Adaptive, aptX, AAC, SBC
- DRIVER UNIT: φ6mm single-walled carbon nanotube composite diaphragm + 7N OCC voice coil adopted Dynamic type full range “NUARL DRIVER [N6] v5X” module
- PLAYBACK FREQUENCY BAND: 20〜20,000Hz
- MICROPHONE: For calling x2 (with cVc NC) / For capturing external sound
- WATERPROOF PERFORMANCE: IPX4
Introduction
The “NUARL DRIVER” [N6] v5 has been further improved to produce a new 7N grade with excellent responsiveness and transmission rate. It utilizes an original single-walled carbon nanotube composite diaphragm. More powerful bass reproduction is made possible by utilizing “NUARL DRIVER” [N6] v5X in conjunction with OCC voice coil of (purity 99.99999%). To provide the same analogue tone as a single wired earphone, the driver is housed in a metal housing and modularized. Furthermore, a delicate sound quality tuning unmatched by anything else is made possible by coupling this earphone module with a digital tone that fully utilizes the DSP built into the SoC. A full- range driver does not have any specific coloring, and the sound it produces is well connected throughout the entire listening area.
It adopts US T.B.I’s patented “HDSS” technology, which suppresses distortion and faithfully recreates a sense of reality. It prevents the localization in the head that is frequently observed in canal-type earphones and accurately replicates the depth and three-dimensionality of the natural sound spread. While wearing the earphones, you can use the external sound capture feature to hear the sounds around you. Switching the music playback mode while also recording outside sound is possible by using the smartphone app “N6 Connect.”
Qualcomm aptX Adaptive is installed. The sound quality and delay will be adjusted in accordance with the state of the communication and the content when used in conjunction with a compatible smartphone. Additionally, it has a built-in “gaming mode,” and even on iOS and Android devices that do not support aptX Adaptive, low-latency wireless communication can be used.
SMARTPHONE APPLICATION “N6 CONNECT”
With features like ON-OFF and mode switching of external sound capture, ON-OFF of gaming mode, setting of minimum / maximum volume level, switching of equalizer setting, changing of button operation contents, etc., N6 Connect is an iOS / Android compatible smartphone app. allows for function customization.
INLINE TYPE 3 BUTTON
It uses a left- and right-specific inline type 3 button. You can use either the left or right earphone to control music, volume, incoming calls, external sound capture, gaming mode switching, and voice command activation on your smartphone. To prevent pressure on your ears while operating, the buttons are positioned on the top. The “N6 Connect” app lets you switch between the front and rear buttons’ functions.
HOW TO PAIR
Open the charging box lid; the earbuds enter into the pairing mode automatically. Turn On the Bluetooth of your device and search for “NUARL- N6PRO2” earbuds. Tap connect.
HOW TO CHARGE THE CHARGING CASE
Connect the charging USB cable into your computer’s USB port and connect micro USB to the device. LED light flashes indicating that your device is charging.
HOW TO CHARGE THE EARBUDS
Place the earbuds in charging case. Make sure to put right earbud in slot R and left earbud in slot L. LED light turns on showing that the earbuds are charging.
FAQs
Why does one TWS earbud work but not the other?
One earbud not working can be caused by a variety of problems. Some issues can be resolved easily, such as Bluetooth pairing issues or devices that just require cleaning or resetting.
How can the song be changed on TWS earbuds?
To play the next track, tap and hold the right earbud for two seconds. To play a previous track, tap and hold the left earbud.
Why won’t my TWS pair?
Your device’s Bluetooth setting should be disabled. Earbuds will automatically turn on when you remove them from the case. To manually sync them, double- press the left and right earbuds at the same time.
Why won’t TWS connect?
If your TWS earbuds are sufficiently old, they may not be repairable, in which case your battery may be dead.
How do I change the TWS volume?
The volume increases when you tap and hold the right earbud; it’s a neat feature. The volume decreases when you tap or hold the Left.
My wireless earbuds won’t connect; why?
Try completely unplugging and replugging the earbuds. If you still have trouble pairing your earbuds, check the manual to see what it suggests. Some earbuds may have a fail-safe hard reset mode.
Can you use just one earbud without the other?
Yes, you can take calls or listen to music in mono using just the right earbud.
Why is the red blink on my TWS?
Your headphones’ red or amber flashing usually indicates that the battery is getting low.
How can I resolve a Bluetooth pairing issue?
Open the Settings app on your phone. Click Connected devices. Tap “Bluetooth” if you see it. Tap the option if you see Previously connected devices.
Why is the volume on my earbuds so low?
Your wireless earbuds’ volume may vary depending on the state of your battery. The earbuds will automatically lower the volume when the battery is low to save energy.
Suppose I misplaced an earbud.
If one of your pair’s earbuds is broken or missing, you’ll need to buy a replacement.
Why can’t Bluetooth locate devices?
Go to Settings > System > Advanced> Reset Options > Reset Wi-Fi, mobile, & Bluetooth on Android devices.
Without a case, how do I charge my earbuds?
Using a USB port on your laptop or desktop computer is another way to charge your wireless earbuds without a charger. Simply plug in your earbuds to the USB port with a USB cable to start charging them.
Can I only use my left earbud?
Yes, you can use the right or left earbud separately to make or receive calls or to play music.
Can you use wireless earbuds to make phone calls?
Nowadays, a microphone can be found in almost all wireless earbuds and headphones.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>