TCP WF216000 Smart Remote Instructions
- June 6, 2024
- TCP
Table of Contents
SmartBox Remote
User Manual
Download the TCP SmartStuff App
The TCP SmartStuff App is used to configure the Bluetooth ® Signal
Mesh and TCP SmartStuff devices. Download the TCP SmartStuff App from the
following options:
- Download the SmartStuff App from the Apple App Store ®or Google Play Store™
- Use the QR Codes here:
https://play.google.com/store/apps/details?id=com.tcpi.iot.smarthome
https://apple.co/38dGWsL
Instructions for configuring TCP Smart App and SmartStuff devices are at www.tcpi.com/smartstuff/
Smart Remote Button Descriptions
Smart Remote Button Instructions
ON: Turns on all TCP SmartStuff devices connected to the APP.
OFF: Turns off all TCP SmartStuff devices connected to the APP.
Increase Brightness: Increases the brightness of the TCP SmartStuff devices on
a network or an individual group.
Decrease Brightness: Decreases the brightness of the TCP SmartStuff devices on
a network or an individual group.
Increase CCT: Increases the color temperature of the TCP SmartStuff devices
on a network or an individual group.
Decrease CCT: Decreases the color temperature of the TCP SmartStuff devices
on a network or an individual group.
- TCP SmartStuff devices must be capable of changing its color temperature for the buttons to work
Group Buttons Group (1, 2, 3, 4)
Group (1, 2, 3, 4) On: Turns on all TCP SmartStuff devices connected to the APP.
Group (1, 2, 3, 4) Off: Turns off all TCP SmartStuff devices connected to the APP.
Group (1, 2, 3, 4) Select: Selects the corresponding group.
Switching Between Groups
Pressing on Group On, Group Off, or Group Select buttons will enable the Smart Remote to control the corresponding group. Pressing the CCT or Brightness buttons will affect the TCP SmartStuff devices in that group only. To change the Smart Remote to control all the SmartStuff devices, press either ON or OFF. Setting up the Groups must be done through the TCP SmartStuff App.
Mounting the Smart Remote to a Wall
HARDWARE NEEDED
- Electric Drill
- Philips Screw (size needed)
- Drywall Anchor (size needed)
- Ruler
- Pencil
- Remove the Mounting Base from the Smart Remote.
- Choose the desired location of the Mounting Base.
- Use a pencil to place a mark on the wall where each Drywall Anchor will go.
- Drill holes.
- Place Drywall Anchor in the wall.
- Place Mounting Anchor on the wall and screw in.
WARNING
NOTE: Please read the instructions before proceeding with the installation.
The TCP Smart Remote is a Bluetooth Signal Mesh device that can be used to
control any TCP SmartStuff device that is on its Mesh network. Functions such
as On/Off, dimming, and group control can be done through the Smart Remote
instead of using the TCP SmartStuff App.
Regulatory Approvals
- Contains FCC ID: NIR-MESH8269
- Contains IC: 9486A-MESH8269
Specifications
Operating Voltage
2 AAA batteries (not included)
Network Protocol
Bluetooth Signal Mesh
Communication Range
150 ft / 46 m
The “Android” name, the Android logo, Google Play, and the Google Play logo are trademarks of Google LLC. Apple, the Apple logo, and the App Store are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TCP is under license.