TCP GU10 RGB and White LED Smart Light Bulb User Guide

TCP GU10 RGB and White LED Smart Light Bulb

Specifications

GU10 – SMALGU320G25RCN1P

• Dimensions: 50 x 54 mm
• Kelvins: 2700K – 6500K
• Colours: RGB + CCT
• Lifetime: 25,000 hours
• Wattage: 4.5W
• Lumens: 3201m
• Beam Angle: 38°
• WiFi: 2.4 GHz
• Warranty: 2 Year Warranty

These SMART GU10s are not compatible with dimmer switches.

Warranty

The manufacturer provides a warranty by the legislation of the customer’s own country of residence, with a minimum of 2 year, starting from the date on which the appliance is sold to the end user. The warranty only covers defects in material or workmanship. When claiming the warranty, the original bill of purchase (with purchase date) must be submitted. The warranty will not apply in cases of: Normal wear and tear. Use of force, damage caused by external influences. Misuse e.g. connection to an unsuitable mains supply. Partially or completely dismantled appliances.

Declaration
TCP hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU and 2011/65/EU. Full declaration can be viewed at tcpi.eu.

CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical &Electronic Equipment) This marking shown on the product indicate that it should not be disposed with other household wastes at the end of it is Please separate it from other types of waste and recycle responsibly. If in doubt, please contact your local recycling centre for details of where and how this item can be safely recycled.

App Install Instructions

1. Download the TCP Smart App from the App Store or Google Play.
   Log in or set up an account using the on screen prompts.
   Use the add device button in the top right corner.

2. The add device menu should pop up automatically.

3. Enterthe network details if prompted.

4. Wait for the device to add.

5. Once the device has been added continue to the next screen.

6. A device can be linked to the room where it is located.

Smart Home Assistant

TCP Smart products work with Amzon Alexa, Google Nest & Siri Shortcuts.
For futher information on connecting to smart home assistants visit: https://www.tcpsmart.eu/faq/

We are social, check us out!
YouTube.com/c/TCPSmart @tcpsmart

FUNCTION

• Main Screen

• Colour Screen
  Note: The period between each timing must exceed 15 minutes.

• Schedule Set Up
  Press schedules to move to the next page. Press the add button in the bottom right hand corner. Choose from the options available:

• Schedule – set up times for the light to come on and off.
  To turn on for a specific day(s) and time(s):

  • Select the Action – Press ON
  • Select the time. AM and PM are both 12hrs
  • Select repeat. For this option choose
  • Once for one occurrence
  • Everyday for all days of the week
  • Custom – select specific days
  • To turn off the above action
  • Select the Action – Press OFF
  • Select the time. AM and PM are both 12hrs
  • The above can then be repeated for multiple schedules

• Sleep

  • Select the time you want the lamp to turn on. Note: the times AM and PM are 12 hrs
  • Use the fade out slide to select the fade out time for the lamp
  • Repeat – see above schedule on how to set up the day(s)

• Wake Up

  • Select the time you want the lamp to turn on. Note: the times AM and PM are 12 hrs
  • Use the fade in slide to select the fade in time for the lamp. Once this time has been reached the lamp will turn off.
  • Repeat – see above schedule on how to set up the days).

• Random

  • Select the time you want the lamp to turn on. Note: the times AM and PM are 12 hrs
  • Repeat – see above schedule on how to set up the day(s).

• Turn On Settings
  This function allows the choice of set up for when the product is turned on. Choose from

  • Restore memory: Uses the last colour and brightness.
  • Initial mode: Uses the initial colour and brightness that was set
  • Custom: Choose your own colour and brightness

• Do Not Disturb

  • This function stops the light form automatically turning on in the event turning on after a power failure.
  • The function is automatically set to off. If you want to turn the light back on after a power failure turn the device OFF and ON twice within 5 seconds
  • To have the light come back on automatically after a power failure press the Do Not Disturb button to activate.

• Remote Control
  Note: this function is not available with the TCP Smart Glass GU10.
  TCP, 1 Exchange Court, Cottingham Road, Corby, Northants, NN17 1TY.

• White Screen

• Scene

  • From the main screen press Scene in the top row.
  • In the next screen choose the required scene by pressing the tab.
  • Press < to return to main screen.

• Music

  • From the main screen press Music in the top row.
  • In the next screen choose the required music setting by pressing the tab.
  • Press < to return to main screen.

• Timer

• More

  • Press to access more applications and choose from:

  • Schedules
    Use preset or custom timings. Use for a gradual wake up or sleep, and random turn on and off if you are away from home.

  • Turn on Settings
    Restore memory in event of a power failure

  • Do not Disturb
    Use to have the device turn on or stay off after a power failure

• Schedules
  Options are:

  • Rhythms
    Allows preset or customer timings for different white colour temperatures during the day.

  • Schedule
    Program the GU10 to turn on and off at different time(s) during the day, and on specific day(s).

  • Sleep
    This function allows you to set a specific time for the GU10 to gradually decrease in brightness until it eventually turns off completely. The gradual decrease in brightness can provide a more relaxing and calming environment than an abrupt turn-off, which can be jarring and disruptive.

  • Wakeup
    This feature allows you to set a specific time for the GU10 to gradually increase in brightness until it reaches its maximum brightness level, and then turn off after a specified duration. This can simulate a natural sunrise and provide a gentle and calming way to wake up in the morning.

  • Random
    This feature allows you to set a specific time for a lamp or light to turn on and off at random intervals, simulating someone being at home even when you are away. This can be a great way to enhance the security of your home and deter potential burglars.

• Rhythms
  Press Rhythms tab. Preset times and colour from the white spectrum for the lamp. Press presupposition for preloaded times and colour. Press Custom to set your own times and colour. To change the time press the corresponding icon for the time you want to change eg . Slide the icon to the desired time. To change the colour press the corresponding icon at the top of the page eg . On the next page press the circle on the colour wheel and move to the desired colour. To adjust brightness use the slider and move to the desired

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>