TCP Smart WiFi Oil Filled Radiator Instructions

TCP Smart WiFi Oil Filled Radiator

WIFI OIL FILLED RADIATOR

TCP Smart WiFi Oil Radiator is a low cost solution for quickly heating a room. Ideal for home, office or workshop. Lightweight, silent and portable. Complete with castors so the radiator can be moved from room to room. The Smart features allow for full voice via Alexa and Google. Direct control via the TCP Smart App. Save money through efficiently heating the room and not the home.

USER INSTRUCTIONS

MODEL

• SMAWHOILRAD1500WEX15
• SMAWHOILRAD2000WEX20
• SMABLOILRAD2000WEX20
• SMAWHOILRAD2500WEX25

POWER

• AC220-240V :50-60Hz 1500W Class II
• AC220-240V :50-60Hz 2000W Class II
• AC220-240V :50-60Hz 2000W Class II
• AC220-240V : 50-60Hz 2500W Class II

IMPORTANT: These instructions are for your safety. Please read thoroughly before use and retain for future reference.

SAFETY INSTRUCTIONS

(to be read before operating the heater).

1. Before using turn the heater on using the ON/OFF button which is located at the front of the heater.CAUTION: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present. Children 3 years and younger should be continually supervised when in close proximity to the heater. Children aged 3 to 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged 3 to 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
2. Use this heater on a flat or horizontal and stable surface.
3. Keep the power cord away from the hot body of the heater.
4. Indoor use only.
5. Do not use the heater in areas where flammable liquids are stored or where flammable fumes may be present.
6. Do not use this heater if it has been dropped; or there is visible signs of damage
7. Do not place the heater close to curtains or furniture in order to avoid a fire hazard.
8. Do not leave the heater switched on when your property is vacant.
9. We do not recommend the use of this appliance through an extension lead or any external switching device such as a plug in timer or remote control plug in adaptor.All heating appliances draw high current through the mains supply and any weakness in the connections or components in these devices can result in overheating of connections which may result in melting, distortion and even the risk of fire.
10. Always ensure the heater is operated in a well-ventilated area.

WARNINGS

• In order to avoid overheating, do not cover the heater.
• Always use the heater in an upright position.
• If the supply cord is damaged, it must be replaced by the manufacturer, their service agent or a similarly qualified person in order to avoid a hazard.
• Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
• In order to avoid a hazard due to inadvertent resetting of the thermal cut out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
• Do not use the heater to dry your laundry. Never obstruct the intake and outlet grilles to avoid the danger of overheating.
• Always use this appliance with feet fixed in place.

INSTALLATION

Your appliance should be used as a portable appliance only.
Install the feet as shown below. Always use your heater with the feet fitted.

MANUAL CONTROL OF RADIATOR

Manual Settings using the LCD screen
Choose a suitable location for the RADIATOR, taking into account the safety instructions above.

ON/OFF BUTTON
Press the on button until you hear a bleep sound. The display will show . Press button to turn the heater on.
This feature can be performed using the TCP Smart App.

TEMPERATURE BUTTON
Rotate the mode button clockwise or anticlockwise to increase or decrease the target temperature. The temperature range is from 5°C to 35°C.

ANTI FROST
This function is used to ensure the product does not freeze during periods of extreme cold.
Once the Anti-frost mode is selected the target temperature will be overridden and the heater will stay at 7°C until the anti-frost function is turned off.
For this function to work the heater must be turned on with the target temperature set at the lowest temperature (5°C). Turn the anticlockwise. The screen will display The target temperature will then be fixed at 7°C. Exit by turning the clockwise

HEATING SELECTION
Press this button once. The screen will display H1, H2 or H3. Rotate the button to cycle between H1, H2 or H3 options. After choosing the desired heating level, wait 5 seconds or press to return to target temperature display. The heating selection is now set.
Note: H1 is Low Heating, H2 is Medium Heating and H3 is High Heating.

TIMER BUTTON
Press and hold button for 3 seconds until the screen displays The H will keep flashing. Turn the button to choose the desired time from 1-24 hours. Wait 5 seconds or press the button to finish the setting. When the timer has been set the remaining time and target temperature will be displayed in a continuous cycle 5 secs apart. From the moment the time is set the timer will continue to count down. Once completed the radiator will switch off.

CLEANING THE HEATER
Allow heater to cool down before cleaning. Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth. Do not use any detergents or abrasives.

CORRECT DISPOSAL OF THIS PRODUCT

WARRANTY INFORMATION

The manufacturer provides warranty in accordance with the legislation of the customer’s own country of residence, with a minimum of 2 years, starting from the date on which the appliance is sold to the end user.
The warranty only covers defects in material or workmanship The repairs under warranty may only be carried out by an authorized service centre. When making a
claim under the warranty, the original bill of purchase (with purchase date) must be submitted. The warranty will not apply in cases of: Normal wear and tear

• Incorrect use, e.g. overloading of the appliance, use of non-approved accessories
• Use of force, damage caused by external influences
• Damage caused by non-observance of the user manual, e.g. connection to an unsuitable mains supply or non-compliance with the installation instructions
• Partially or completely dismantled appliances

CERTIFICATION CONFORMITY

• Hereby, Technical Consumer Products Ltd declares that the radio equipment type TCP Smart
  Wifi Oil Filled Radiator 1500W – White, TCP Smart Wifi Oil Filled Radiator 2000W – White, TCP Smart Wifi Oil Filled Radiator 2000W – Black, TCP Smart Wifi Oil Filled Radiator 2500W – White is in accordance with Directive 2014/53/EU.

• The full text of the EU declaration of conformity is available at the following internet address – https://tcpi.eu/compliance-data/

REGISTERED OFFICES

• TCP UK Ltd, 1 Exchange Court, Cottingham Road, Corby, Northants, NN17 1EW.
• TCP France, Quai Gabriel P’ri, 1, Joinville Le Point, France, 94340.

CONNECTING THE APPLIANCE TO WI-FI

Use the QR code below to download the TCP Smart App for control of the heater by voice or TCP Smart App.

QR code for both android and iOS

To control the heater using the TCP Smart App the unit must be turned on. Before you get started you will need the following:

• Smart device such as a mobile phone or tablet
• Access to the Google or Apple App store, log on and passwords
• The name of your Wi-Fi network and password to your Wi-Fi network
• Confirm your home Wi-Fi router is running on 2.4Ghz and not 5Ghz. If you are unsure, please consult your broadband provider for details on how to change the settings.
• Turn off any Wi-Fi extenders during set up
• Check you do not have any limitations on the number of devices with your broadband provider
  Please note: Our products do not work on 5Ghz only 2.4Ghz.

For instructions on how to connect to Amazon Alexa or Google Nest please visithttps://www.tcpsmart.eu/how-to-alexa-google-nest

With the heater turned on, hold down the Mode button for 3 seconds until the WiFi symbol at the top right-hand corner of the screen blinks rapidly. When
connected the symbol will be continuously displayed. The device is now in pairing mode. In the TCP Smart App, enter your WiFi password and follow the instructions in the App to connect

CONTROLLING THE RADIATOR VIA TCP SMART

APP BACKGROUND COLOUR
Press other functions button To turn on slide the button to the right.
The colour at the top of the app screen will change with the target temperature. To turn off this function slide this button to the left.

ON/OFF BUTTON
Press once to turn on. Press to turn off.

LED DISPLAY SCREEN BRIGHTNESS
Press to dim the LCD screen. Press again to return to normal brightness.

CHILD LOCK
Press to turn on. Press to turn off.

TARGET TEMPERATURE SETTING

TIMER

Use the + and – buttons to set a countdown, from 1 to 23 hours. From the moment the time is set, the timer will then continue to count down. Once completed the Radiator will switch off.

MODE
Press This will take you to the mode screen as below.

Select to choose the following functions:

Heating mode – Set using the temperature scale on the main screen. Press < to return to main screen

Anti Frost
Select to turn this function on. Press to turn off. Press to return to main screen.

Heat Level
Select one of the heat level options:

• Low Heat Setting
• Medium Heat Setting
• High Heat Setting

Press < button to return to the main screen

TCP LTD, 1 EXCHANGE COURT, COTTINGHAM ROAD, CORBY, NN17 1EW

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>