WEST WATCHES Model Planet Plasma Watch User Guide
- June 6, 2024
- WEST WATCHES
Table of Contents
Model Planet
User guide
Features
- 6 mm screen
- Wrist circumference 14 cm – 21 cm (suitable for children and teenagers)
- Draagbare Comfortable portable strap with snap closure
- Time – date – alarm display in LED lighting that you can adjust in terms of color, 7 colors
- Enter 3 different alarm times
- In addition, possibility to give an alarm every 30 – 60 or 90 minutes (for example, for taking medicines or a signal to indicate that children can urinate.
- The alarm is played through 9 different songs (you can not turn them off by themselves) and all LED lights will flash
- Splashproof (you cannot swim or shower with it)
- Weight 23 grams
- Watch shoots into sleep mode after 3 seconds making it dark. By pressing the button you can see the time again
- Charging in a device by means of USB connection 2.0 · No phone required
- 24-hour display possible
- Battery display available, the battery lasts 7 days on average
Instructions
Change time
To change the time, activate the watch to see the time. Press the home button
on the watch for about 5 seconds until the time flashes. Now set the correct
hour (it may be that you can only enter the hours up to 12, then set the
12-hour display, this is easy to change in the next steps, see 1), as soon as
the hour is correct, keep the home button again 5 seconds (do not release and
press again, because then the hour will change again).
Then press the home button until you can set the minutes.
Now set the correct minutes. Press again for 5 seconds and you can set the
date.
Set date (it follows immediately after adjusting the time)
Press the home button for 5 seconds until you can set the month of the date.
Now set the correct month. Then press the home button just as long to set the
correct day. Now set the correct day of the date. Then press the home button
until you can set the calendar year. Now set the correct year. Keep pressing
for 5 seconds again and you will see 12 or 24.
12 versus 24-hour display
- Keep pressing and then it says 24 or 12, here you can adjust the time to
the 24-hour mode or 12-hour mode. If you could only set the hours to 12 in the
hours and you set this button to 24 hours, you will see that the watch has
switched to the 24 hours time after you have turned it on again.
For example, the time is 3.30 pm and you could only set this in the first screen to 3.30 am and you set the display to 24, then the time when you activate the watch again will be at 15.30.
Release the watch and everything is set correctly.
Set alarm
Fixed alarm 3 x
Press the home button 3 times and see AL, then press the home button of the
watch for about 5 seconds until you see AL1 with on or (which means off). If
you hold the home button for 5 seconds you can choose whether you want this
first alarm on or off. Then you press again for 5 seconds and you can turn on
the alarm hour and you press the minutes for 5 seconds again (it works exactly
as with the time). You automatically get to alarm 2 which you could turn on in
the same way and then alarm 3.
For the alarm every 30 or 60 or 90 minutes you need to do the following:
Make sure that the watch has a black screen completely and press the home
button for 5 seconds, you will now see the CD standing, release, and press
again for 5 seconds, the dashes will now move, press again for 5 seconds and
you can press the duration. Set 00 minutes (off) or 30 minutes or 60 minutes
or 90 minutes. For example, if you set it to 60 minutes, you will receive an
alarm every 60 minutes from the moment you set it. You can see how far the
time is already by again pressing the home button within the black screen for
5 seconds and then you will see a timer that counts down. Press again for 5
seconds and you can adjust or turn off the alarm.
If the alarm goes off, turn it off by pressing the home button.
Battery display
Pressing the home button 4 times shows the percentage of the battery. When the battery is almost empty, all LED lights change to a red color. Please do not charge often in between.
Adjusting LED colors
By pressing the home button 5 times you can change the LED colors for the
time, date, etc. You will see 4 colored blocks that all-flash. Press the home
button for 5 seconds and the watch shows the time. Now press the home button
again and choose the color how you always want to see the time, for example,
dark blue. Press the home button again for 5 seconds and you can change the
color of the date to yellow, etc.
Have a good time with West Watches!
www.westwatches.nl
Pay attention! This tracker is not a medical device and cannot be used for
medical purposes. Almost all activity trackers or smartwatches that offer
functions such as heart rate and blood pressure measurement are there to give
an indication and can show differences due to external factors such as
moisture or incorrect wearing. An activity tracker should absolutely not be
considered a medical device. We at West Watches strongly advise against this
and are not responsible for any consequences by still considering and using
these trackers as a medical device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>