West Watches Y99 Heart Rate Smart Bracelet Instructions
- June 4, 2024
- WEST WATCHES
Table of Contents
West Watches Y99 Heart Rate Smart Bracelet
Settings
Use H Band APP on your iOS or Android smartphone (No Ipad or Computer) as
follows.
Note: The hardware and system of your phone shall meet the following
requirements.
Search and download H Band APP
Search and download H Band APP from the Apple Store, 91 Assistant, 360
Mobile Assistant or other app stores
Scan the QR code. It probably has a problem to open the link by scan tools of
your cell phone, please copy the link and open it through broWsers.
Product activation and installation
The product must be activated by charging before initial use, and then charge the product to ensure normal power supply. The hand ring will automatically power on.
How to charge
Connect the bracelet
Open Bluetooth and H Band APP click-connection, and select Y99 to connect, please choose to allow access to location info. When the tracker is connected successfully, the sign on the upper left corner of it is displayed like this: G-Notes while connecting
Bluetooth is turned on
Sufficient power in the bracelet keep your cell phone and bracelet within 50cm
when connecting If your phone can’t find the bracelet in the APP please open
all permissions of H Band software in your phone settings.
Common Questions
The equipment could not be found when connecting.
- Ensure that the Bluetooth of the smartphone is on, the smartphone operating system should be Android 4.4 and above, or Los 8.0 and above.
- Ensure that the distance between the phone and the device is less than 0.5 meters. After connection, the device should be kept in a valid range ( normally less than 10 meters).
- Ensure that the equipment is not being recharged. lf you still have problems after charging, please be free to contact us.
Occasional Bluetooth connection failed?
- The Bluetooth service has an exception atter the phone is restarted.
- Restart the phone or the Bluetooth service, then it can connect properly.
- Appearance Introduction Names of different parts
Functions Introduction
Note:
Interfaces of finding the phone, stopwatch, and countdown are dosed by
default, which will be displayed on the bracelet after turning them on in the
APP settings- My device-switch setting.
Setting the interface Make sure the bracelet and APP are connected. Enter APP
click Settings -Y99- Main interface style settings select the corresponding
style. t can be checked on the screen of the tracker
Turn on/turn off
Turn on: On power, touch the screen and hold for about 4 seconds, enter the
main interface; Touch the button and hold for 4 seconds, enter the Bluetooth
address and software version interface.
Off power: Switch to the shutdown interface and touch the screen for 4
seconds.
Sport mode
- Press the sport mode option for 4 seconds for you to enter into sport mode . There are 10 sports modes in total
- You can click the touch key to choose your sport mode
- Press and hold the touch key for 2 seconds to enter your sport mode
- You can click the touch key to choose your sport mode
- Press and hold the touch key for 2 seconds to enter your sport mode
- Data saving
- If the sports last less than 1 minute, the user will be reminded of unsuccessfully saving the data.
- The screen would return automatically to the main interface within 4 seconds but Sport mode will work in the background.
Steps, calories, mileage
Enter the step counting interface, which shows the current number of steps,
target progress, calories, and distance of that day. The screen would off
after 5 seconds. The steps are detected by the acceleration sensor, a small
amount of error (within 106) is in a reasonable range.
About heart rate
Heart rate testing Enter heart rate intertace, the bracelet wauld test
automatically. In the beginning, the data would fluctuate, but it will
gradually stabilize. After the test, it would show the result. If your heart
rate can’t be detected, the screen would show in this way, —/—. If there is no
operation, the screen would be closed after 60s. (No matter whether the heart
rate is detected or not).
Heart rate monitoring As long as you wear the bracelet, it will automatically detect your heart rate, steps and calories, and sync to APP Automatic heart rate monitoring is on as default and it automatically detects every 30 minutes/ lf you want to turn it oft please set it in the app: Settings -Y99- Switch setting – HR automatic monitoring-turn off lo monitor your heart rate more accurately, please keep it a bit tighter than Usual when you are taking exercise. (6) Sleep monitoring Enter the sleep monitoring interface, which shows the total sleep time of the previous day. This function works automatically. Generally, you can know the data 10-30 minutes later after getting up. (7) Looking for a cell phone Keep the H Band working in the background on your phone, if you switch the interface to the searching mode and hold for 4 seconds, and the phone connected to the watch would ring and vibrate. (8) Stopwatch Turn on the stopwatch in the APP then turn to the stopwatch interface by pressing the screen and holding for 4 seconds. (9) Countdown Turn on the countdown in the APP and choose a time period, after pressing OK, the bracelet would automatically display the countdown. Press and hold for 3 seconds, it would be turned off. (10) Information reminder Turn on APP- Settings-My device-Message alert, turn on or turn off the alert. If you want to display the messages, please set in the corresponding APP (11) Call reminder Atter setting up a call reminder, the bracelet would continually vibrate when someone calls in. You can make it mute by short touch and reject to pick by long
Alarm clock
In the APP you can set alarms and choose the right icon. The maximum of alarms
is 20.
Motion alert- remember to move
Set a reminder time in the APP if it’s the time, the tracker would alert. (13)
Heart rate alert The bracelet automatically detects heart rates, if the data
reaches the warning number or higher than that, the bracelet would
automatically remind you, the default reminder value of heart rates is 115,
and you can set a new one according to your situation. (14) Remote control to
the camera of the smartphone
Connect the bracelet and open the APP click Y99, take a photo, enter the
camera interface, and the wrist screen automatically turns on. Then you can
click the bracelet to take photos. (15) Wearing test When the switch in the
APP is turned on, your wrist would be tested in the wearing process to avoid
wearing miscarriage.
(16) Female physiological period The female function is only used for female
users. It would be turned on when setting the profile as a female in the
APPSet the data after turning on, that is, only record menstrual period,
pregnant period, treasure mother period, then enter the second period and
select your own basic information.
(16) Female physiological period
The female function is only used for female users. It would be turned on when
setting the profile as a female in the APPSet the data after turning on, that
is, only record menstrual period, pregnant period, treasure mother period,
then enter the secondary period and select your own basic
information.
(17) Battery icon status description
About the Waterproof The waterproof grade of the bracelet is IP68, which
means that it protects against dust inhalation protection tor short immersion.
The activity scenes it allows are as follows:wear it in a rainy day and wash
faces and hands,ear it for swimming and up to 3 meters diving Please do not
weara bracelet to swim in the sea or take a hot shower
Product parameters
FCC STATEMENT
This device complies with A Part 15 of the FCC Rules. The operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning
Improper use, such as replacing batteries would cause the risk of explosion! Please dispose of used batteries properly. Used batteries must not be treated with residual waste and must be disposed of
separately. Dealing with the used batteries at common sites personaly is free. The owner of the old battery is responsible for carrying these batteries to the sites or similar places. You will help to recycle valuable raw materials and toxic substances through this little personal effort.
Q: Received this fitness tracker watch but it’s only giving me time in
digital, how do you get around the old-style clock face?
A: Please connect the tracker with your phone, open the APP(H Band) and then
choose: Settings – My deviceY99- More Settings of main interface style – Style
2.
Q: How to get the automatic blood pressure monitor?
A: Settings – My deviceY99- More – Switch setting – BP automatic monitoring
Also you can switch on the Bp private mode, set your personal-tailored BP mode
to obtain more accurate data.
Warm Tip:
You can get more information on APP(H Band), just open the APP connect the
tracker with your phone, scroll down on the Dashboard, and look for more data
history about your Sport, Sleep, Heart rate and Blood pressure. Also can set
your tracker by choosing
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>