hama 00200101 USB Hub 3.0 4-Port Instruction Manual
- June 6, 2024
- Hama
Table of Contents
hama 00200101 USB Hub 3.0 4-Port
Operating instruction
Package Contents
• USB-C Hub
• These operating instructions
Safety Notes
• Do not attempt to service or repair the product yourself. Leave any and all
service work to qualified experts.
• Do not open the device or continue to operate it if it becomes damaged.
• Do not operate the product outside the power limits given in the
specifications.
• Do not modify the product in any way. Doing so voids the warranty.
• Keep this product, as all electrical products, out of the reach of
children!Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating, and only use it in
a dry environment.
• The product is intended for indoor use only.
• Do not use the product in the immediate vicinity of heaters or other heat
sources or in direct sunlight.
• Do not use the product in moist environments and avoid splashes.
• Do not use the product in areas where the use of electronic devices is not
permitted.
• Do not drop the product and do not expose it to any major shocks.
• Dispose of packaging material immediately according to locally applicable
regulations.
Warning
• Find out the maximum output current capacity of the USB port on your device.
To do this, consult the operating instructions or ask the manufacturer.
• Common values are 500 mA for USB-A 2.0, 900 mA for USB-A 3.0, and up to 3000
mA for USB-C.
• Ensure that the cumulative current draw of all USB devices connected to the
hub/multiport adaptor does not exceed this value.
Startup and Operation
• Switch on your computer and boot the system.
• Connect the product to a free USB port on your computer.
• You do not have to install drivers; the computer will automatically
recognise the product.
• If necessary, follow the instructions for your operating system.
• In order to use your devices, plug them into the product one after the
other.
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/ or safety notes.
Technical Data
- Operating voltage / current consumption 5 V max. 3 A
- Compatibility USB-C port
- System requirements Windows 10 / 8 / 7 Mac OS 10.8 ≥
- USB specification USB 3.2 Gen1
Note:
• If there is interference or the product no longer responds, unplug the
product, wait a few seconds and then plug it in again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>