hama 00054835 Multi Chipcard Reader

hama 00054835 Multi Chipcard Reader

Operating Instructions

Controls and Displays

Fig. A
1. Chip card slot
2. Slot for SD/MMC/MS/XD cards
3. Slot for microSD cards
4. Slot for M2 cards

Fig. B
5. USB port for connection cable
6. Status LED for card access

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package Contents

• “Multi” USB 2.0 chip card reader
• USB 2.0 cable
• These operating instructions

Safety Notes

• The product is intended for private, noncommercial use only.
• Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
• Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight
• Do not drop the product and do not expose it to any major shocks.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
• Do not open the device or continue to operate it if it becomes damaged.
• Dispose of packaging material immediately according to locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Keep this product, as all electrical products, out of the reach of children!

System Requirements

The chip card reader supports the following operating systems:

• Windows 10 / 8.1 / 8 / 7 /
• Mac OS 10.10 / 10.11

Chip card interface:

• Compatible with the PC/SC Specification
• Supports Microsoft Smart Card for Windows
• Supported memory chip cards: HLE4418, SLE4428, SLE4432, SLE4442, AT88SC1608, AT45D041
• Smartcard (processor chip card) support: according to ISO 7816-1, 2, 3, 4; protocols T=0, T=1
• APIs: PC/SC, PKCS#11
• Power supply for cards: 1.8 V/3 V/5 V

Supported memory cards:

• SD / SD ROM / Extreme SD/ Extreme II SD/ Ultra SD/ Ultra II SD/ SD Pro/ SD Elite Pro/ HS SD/ Ultra Speed SD/ SD Ultra X SDHC / SDXC
• microSD / microSDHC / microSDXC / miniSD / miniSDHC
• MMC / MMCplus / RS-MMC / MMCmobile/ MMCmicro*
• MS / MS Pro / MS ProDuo* / M2
• CompactFlash Typ I / Typ II
• xD-Picture Card
  *only with adapter (not included)

Getting started

Note – Compatibility USB 1.1

• The USB 2.0 chip card reader is downward compatible with USB 1.1.
• No additional drivers are needed. The installation runs automatically. To use the chip card reader, you need a smartcard or ID card, as well as compatible software. You can get the software from your bank, your local administration or other certified institutions, as applicable. The software is not included with this product. On the internet, you can find other free software and chip cards or ones that are subject to charge that you can use with your chip card reader.
• Connect the included USB 2.0 cable to the multi Card Reader (1).
• Connect the free connector of the USB cable to a free USB port at your computer.
• Insert your memory or chip card into the corresponding slot on the Multi card reader
• (1, 2, 3, 4). The left LED indicator light lights up in blue and the right one in hot pink (6) if the connection is successful.
• The hot pink LED indicator light flashes during data transfer.
• It is not possible to exchange data between two memory cards used in the Multi card reader at the same time (hot swapping).
• Generally, it is also impossible to exchange data between a chip card and a memory card that is inserted at the same time.

Warning – Data Loss

• Ensure that the data transfer is done before you remove a memory card from your Card Reader.
• Always use the eject function of your operating system before you remove a memory card from your Card Reader or disconnect your Card Reader (with inserted memory card) from your end device.
• Data loss can´t be excluded at disregard!

Note

• To gain the maximal data transfer with SD/ microSD cards, the memory card has to support UHS-I.
• Most cards in the SDXC format are formatted with the exFAT file system. This system will only be supported by Windows Vista (from SP1)/7/8 and Mac OS 10.6.5 (or higher).
• To also use SDXC cards (with the exFAT formatting) under Windows XP, you need at least XP SP2 and the exFAT update from Microsoft.

Care and Maintenance

• Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
• Make sure that water does not get into the product.

Warranty Disclaimer

Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com

Recycling Information

Note on environmental protection:

After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/Batteries, you are making an important contribution to protecting our environment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>