hama 00183382 FC7 5iP Wireless Charger Set Instruction Manual

00- 183382
Wireless Charger “FC7,5iP”

****Operating instruction

Controls and Displays

1. USB-C input
2. Status LED
3. 230-V Fast charger

Thank you for choosing the Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for futurereference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Risk of electric shock
This symbol is used to indicate safety instructions or to draw your attention to specifichazards and risks.
Warning
This symbol is used to indicate safety instructions or to draw your attention to specifichazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package Contents

•  ‘FC 5Alu’ Wireless Charger for smartphones
• 230-V fast charger
• 1x USB-C cable
• These operating instructions

Safety Notes

• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moistureand overheating, and only use it in an adry environment.
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications.
• Do not use the product in areas where the use of electronic devices is not permitted.
• In order to prevent damage caused by overheating, make sure the product is not covered by textiles, metal, or other objects.
• Dispose of packaging material according to locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Use the product for its intended purpose only.
• Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
• Keep this product, like all electrical products, out of the reach of children!
• Use the item only in moderate climatic conditions.
• Do not use the product in moist environments and avoid splashes.
• The product is intended for indoor use only.

Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the AC adapter, the adapter cable, or the main cable are damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Do not put any bank cards or similar cards with magnetic strips, or other magnetically sensitive objects, on the product. The data on the cards could be damaged or deleted.
Warning
Ensure that there are no metal parts (for example, metal plate for magnetic holder) on the back of your terminal device. Metal may heat up significantly in the field of the induction charger, causing damage to your terminal device and/or the charger.

Getting Started and Operation

Warning

• Only operate the product from a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/Off switch –ifthis is not available, unplug the power cord from the socket.
• If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
• If you will not be using the product for a prolonged period, disconnect it from mains power.

Note

• To be able to charge your terminal device using the wireless charger, your terminal device must be compatible with inductive charging technology. Please read the operating instructions of your device.
• Note that the presence of mobile phone cases, covers, or other materials between the wireless charger and the back of your terminal device can interferewith charging or even prevent it.
• Connect the included USB cable to the USB-C input (1) on the inductive charger and to the included USB charger. Please refer to the operating instructions for the USB charger used.
• The status LED (2) flashes twice to confirm an active power supply.

Warning
As a rule, do not use charging devices or USB connections that are defective, and do not try to repair them yourself.

• Put your terminal device on the inductive charger (B) with the back to the charger.
• Charging starts as soon as an effective induction field has been generated. The status LED (2) is constantly littered. The current charging status appears on your terminal device.
• If no connection can be established through induction, you may have to change the position of your terminal device (B).
• Charging stops automatically once your device’s battery is fully charged. The status (2) goes out.

Note
Disconnect the device from the power supply before cleaning it or if it is not going to be used for a long period of time.

•  Remove your terminal device from the wireless charger and disconnect the charger from the power supply.

Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Note
On some terminal devices, the end of charging is not communicated to the inductive charger. In this case, the status LED (2)remains lit red; whether or not charging has finished will be indicated on your terminal device.

Warranty Disclaimer

Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or from failuretoobserve the operating instructions and/or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product. Hotline: +49 9091 502-0 (German/English) Further support information can be found here: www.hama.com

Technical Data

Wireless Charger

Fast Charger

Recycling Information

Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual, or the package indicates that a product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices/Batteries, you are making an important contribution to protecting our environment.

Declaration of Conformity

Hereby, Hama GmbH &CoKGdeclares that the radio equipment type [00183382] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama.com -> 00183382 -> Downloads.

Hama GmbH &CoKG
86652 Monheim /Germany
www.hama.com

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>