hama Stereo Phono Preamplifier PA-506 Instructions

Stereo Phono Preamplifier “PA-506”

Operating Instructions

Thank you for choosing Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for futurereference. If you sell the device, please pass these operating instructions on to the new owner.
»PA-506« Stereo Audio Preamplifier to connect record players with magnetic pick-up systems to high-level inputs. Record players are no longer compatible with many of the new stereo amplifiers. The »PA-506« preamplifier also allows the use of normal high-level inputs (LINE, AUX, CD, Tuner, Tape, etc.) as extra-record player input. Moreover, the »PA-506« enables the connection of the record player to a PC sound card. The» PA-506« features built-in RIAA equalization.

Explanation of Warning Symbols and Notes

Risk of electric shock

This symbol indicates product parts energized with a dangerous voltage of sufficient magnitude to constitute a risk of electric shock.

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package Contents

• Stereo-phono Preamplifier
• power supply,230 V, 500 mA
• RCA cable, 2plugs –2plugs
• These operating instructions

Safety Notes

• The product is intended for private, non-commercial use only.
• Use the product for its intended purpose only.
• Donot use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
• Donot use the product in areas where the use of electronic devices is not permitted.
• Donot use the product in moist environments and avoid splashes.
• Keep the packaging material out of the reach of children due to the risk of suffocation.
• Protect the product from dirt, moisture, and overheating and use it in dry rooms only.
• Donot drop the product and do not expose it to any major shocks.
• Donot operate the product outside the power limits given in the specifications.
• Donot open the device or continue to operate it if it becomes damaged.
• Connect the product only to a socket that has been approved for the device. The electrical socket must always be easily accessible.
• Dispose of packaging material immediately according to locally applicable regulations.

Risk of electric shock

• Donot open the device or continue to operate it if it becomes damaged.
• Donot use the product if the AC adapter, the adapter cable, or the mains cable are damaged.
• Donot attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Operation

Warning

• Connect the product only to a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
• Disconnect the product from the network using the power button –if this is not available, unplug the power cord from the socket.
• When using a multi-socket power strip, make surethat the power draw of all the connected devices does not exceed its maximum throughput rating.
• If you will not be using the product for a long period of time, disconnect it from mains power.

Note

• Ensure correct polarity when using plug-in mains adapter, otherwise, the device could be damaged.
• Lay all cables so that they do not pose a tripping hazard.
• Donot bend or crush the cable.
• Connect the left and right channel of the record player with the corresponding left and right channel of the preamplifier input (MM/Input).
• Check that the record player has an amagnetic pick-up. Any separate chassis earthing cable on the record player must be connected to the additional screw at the back of the device.
• Connect the left and right channel of the preamplifier output with the corresponding left and right channel of the stereo amplifier input (LINE, AUX, CD, Tuner, Tape, etc.).
• Then connect the »PA-506« preamplifier to the power supply. The record player and amplifier can now be used in a customary manner. Please check that the correct input on the stereo amplifier has been selected.

Care and Maintenance

Note
Disconnect the device from the power supply before cleaning it or if it is not going to be used for a long period of time.
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH &Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or from failure to observe the operating instructions and/or safety notes.

Technical Data

Specifications in accordance with Regulation

(EU) 2019/1782

Manufacturer’sname or trademark, commercial registration number, and address| Hama, HRA12159, Dresdner Str. 9, 86653 Monheim
---|---
Model identifier| HNBL120050WE
Input voltage| 100–240 V
Input AC frequency| 50/60 Hz
Output voltage / Output current / Output power| 12.0 VDC/ 0.5 A/ 6.0 W
Average active efficiency| 80.6 %
Efficiency at low load (10 %)| 71.5 %
No-load power consumption| 0.08 W

Recycling Information

Note: on environmental protection:

After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual, or the package indicates that a product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices/batteries, you are making an important contribution to protecting our environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>