Xiaomi HIMO H1 Folding Electric Bicycle User Manual

Manuals+
User Manuals Simplified.

HIMO H1 Folding E-Bike User Guide

HIMO H1 Folding E-Bike User Guide

Precautions for use

Do not harm yourself by lending your car to someone who can1 handle it. When riding in rainy and snowy weather, the braking distance will be extended. Slow down and walk slowly. Avoid traveling in bad weather such as heavy rain. Before riding, check that the braking system is working properly and clean the reflector to avoid occlusion. It is recommended for people aged between 16 and 50 and weighing less than 75kg. Cyclists under the age of 16 should ride under the supervision of adults. It is not recommended for people outside the scope to use the bicycle. If it is really necessary to use the bicycle, it should bear additional risks caused by different body functions

Safe use of the product

Please strictly abide by the traffic laws and regulations, prepare protective equipment such as helmets and protective gear before riding, and pay attention to driving safety. It is strictly prohibited to ride with one hand holding handlebars and both hands off handlebars. Do not park at building doors, evacuation staircases, walkways, and exits. Do not charge and park in the residential building, charging should be away from combustible materials, please charge a=rding to the specified time, charging time should not be too long. Proper use and maintenance of batteries, old batteries shall not be dismantled without authorization and should be organized by professional departments to recover.  Understand the usage and warning terms of the charger, and use the original charger.

Preparation before riding

• The power supply circuit, lighting is good.
• Before riding, please check whether all parts of the car are clamped tightly to avoid accidents
• Check the reflector for damage or contamination before cycling

Vehicle coding position map

Electrical schematic

Under the condition of full power, the endurance is 75kg, the temperature is about 25°C, the environment of a flat road is still without wind, and the driving condition is measured at 15km/h uniform speed under the energy-saving mode. The actual endurance will be different due to factors such as load, temperature, wind speed, road surface, and operating habits.

Main technical parameters of the bike

Main technical parameters of the motor
Motor type De brushless low-speed motor

Rated power
Maximum speed
The rated voltage
Maximum output torque
The spec. of motor
The input voltage
The output voltage
The output a.JrTent
Charging time The spec. of battery
Battery type
Capacity
Nominal voltage
Under voltage value| 180W
550r/min
36V
7N.m
100~240VAC
42V
1.5A
4-6h
Ion battery
7.5AH
36V
30±1V
---|---

About H1

Before riding, check whether the safety buckles of all parts of the bike are tightly locked to avoid safety accidents

Folding steps

Riding operation

Long press 2s button: power ON / OFF Press the button 2 limes in a row: headlight ON / OFF

Turn the speed control knob in the direction shown in the figure to accelerate the vehicle

Turn the dial brake lever in the direction shown in the figure to complete the vehicle’s electronic brake

Riding conditions
The HIMO HQ folding electric vehicle is a Coldplay electric vehicle, not a daily cycling electric bicycle, Do not use HIMO H1 to ride on motorized and non-motorized roads.
It is recommended to use HIMO H1 in indoor areas with smooth road surfaces and playgrounds of parks, playgrounds, and other places without motorized vehicles. Feet are only used for placing feet.
Warm prompt
It is only applicable to fiat and hard road, not to the place with obstacles and bumps Do not ride on water, mud, sand, grass or other uneven or slippery roads It is  recommended that you ride in an area allowed by local law
Prohibited items
Do not ride on low-traction surfaces (including but not limited to wet surfaces, soft sand, soft sand, ice or slopes of >5 degrees) ; It is forbidden to keep the folding car in the car or under high-temperature environment for a long time Do not ride with a one-handed handle or both hands off the handle Do not use a folding vehicle to carry things
About the battery
Before use, confirm that the battery model is the original battery of the whole vehicle. Do not use other brand of batteries at will Check the appearance of the lithium battery is in good condition, there is no damage, leakage, hot water and smoke In order to ensure the safety of transportation, the ex-factory electric quantity of the battery is about 30%.
Due to the self-consumption of electricity during the transportation and storage cycle, the electric quantity is low or no electric quantity during the first use. This is a normal phenomenon.

Using The environment
The optimal operating environment is 10° -45° The usable capacity at -10° is 70%, and the usable capacity at 0° is about 85%, and the usable capacity at 25° is 100% If the battery has odor, heat, deformation, and other abnormal conditions, please immediately stop using; Keepaway from batteries and contact aftersales.
Warning
The battery is not a part that can be repaired by the user. If there is any abnormal phenomenon, please contact the after-sales department for maintenance.the battery to produce heat, smoke, fire, and explosion. Unauthorized dismantling of the battery will not be subject to the three- package policy and may cause
Charging environment
Use a battery charger for charging, do not use other brands or model chargers for charging. Please charge the battery at the ambient temperature of 0° -40° to ensure that the surroundings are free of flammable substances and well ventilated. Charging time description: the charging time of the battery should not exceed 12 hours. Excessive charging will affect the battery life and there are safety risks. In the early stage of charging, the electric quantity rises quickly, while in the later stage it rises slowly. This is the procedure set for charging safety, which is normal. When charging in winter, when the outdoor temperature is low and the environment is below O”C, the battery will stop charging. This is a normal phenomenon. Please place the battery at an appropriate ambient temperature for charging to ensure the charging effect. Do not charge outside when bad weather During the charging process, the charger has a temperature rise effect and the surface temperature is high, which is a normal phenomenon. Please feel free to use it and pay attention to avoid children’s touch

Storage environment

After the battery is placed in the car, the battery power will be slowly consumed due to the vehicle’s working reasons. The vehicle can be placed for up to two months. The meter shows that the power decline is normal. Please store the battery at the ambient temperature of 0° -25°. Do not store the battery in an environment higher than 45°, otherwise, the battery will suffer irreversible capacity attenuation. If the vehicle is not used for a long time (such as winter, summer, or other special cases), the battery must be taken out and stored separately, and regularly maintained and charged. The longest maintenance and charging time is 2 months, otherwise, it may lead to electricity The pool power is completely exhausted, resulting in irreversible damage. For such problems, the battery failure will no longer be within the range of the three guarantee policy. The most suitable storage capacity of the battery is 50%, if the battery is less than 10% or more than 90%, long-term storage will lead to irreversible capacity degradation of the battery. Avoid storing the battery in a risky location where a drop could cause uncontrollable damage to the battery and could cause leakage, heat, smoke, fire, or explosion.

Battery remove and charging instruction

Battery removal and charging Open the battery box wrench and pull it out to remove the battery
Note: If you can’t pull it out smoothly, please push it upwards and pull it.

COMPONENT DESCRIPTION

Maintenance and repair
Regular vehicle inspection
Whether the fasteners are locked and whether the joints in each part are normal; Whether the tread pattern affront and rear tires is worn and cracked, whether the driving, whether the driving system is smooth;ls the braking system working whether the brake system is normal Whether the locking mechanism of folding part is normal
Method of vehicle storage
When the product is not used for a long time, please do not store it in the outdoor environment, under bright light, and at subzero temperature for a long time, and the distance from the heat source (heating equipment, etc.) should not be less than 2M; Store in a dry, clean, well-ventilated indoor environment with a temperature of 10° -45° and relative humidity of no more than 90%; If you do not use the car for a long time, pay attention to do regular charging (generally about two months apart) to maintain the battery performance. This product should not contact with corrosive liquid to avoid any mechanical impact and pressure

Transport
In the process of transportation, should not be subjected to violent mechanical impact, sun, rain, chemical corrosive substances, and harmful gas erosion; In the process of loading and unloading, the product should be handled gently, strictly preventing the fall, roll, and pressure.
Maintenance and cleaning instructions
Do not flush with water to avoid potential accidents caused by wetting of internal electronic parts and wiring; Please use a neutral cleaner, gently wipe the dirt on the surface of paint or plastic parts with a cloth, and then wipe it clean with a dry cloth. Please use lubricating oil to clean the metal parts of the car body for maintenance. Do not oil the brake parts to avoid brake failure and danger.

Troubleshooting

1. This form is prepared in accordance with the provisions of SJ/T 1136 O:l indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit set by GB/T 26572. X:lnd indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in GB/T 26572.

The principal:
Manufacturers:
SILVIO
Shanghai HIMO Electric Technology Co.LTD
Tianjin Fuji-ta Technology Co.LTD
Producer: Tianjin Fuji-ta Technology Co. LTD
The manufacturer adds: Taian road and AIMA road, south distr development zone, Tianjin
Service number: 400-182-9808

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>