INNOSILICON A9-ZMaster 40K Mining Equihash Algorithm with Maximum Hashrate User Manual
- June 6, 2024
- INNOSILICON
Table of Contents
INNOSILICON A9-ZMaster 40K Mining Equihash Algorithm with Maximum Hashrate
OVERVIEW
| Part Number | A9 |
|---|---|
| Algorithm | Equihash |
| Hash Rate | 50Ksol/s (+-8% ) |
| Power | 620W +/-8% |
| Size (L×W×H) | (L)360mm(W)125mm(H)155mm |
| Net Weight | 5.13KG (without PSU) |
| Operating Temperature | 0-40 ℃ |
| Required rated PSU | 1000W or above, 7 * PCI-E 6Pin |
| Network Connection | Ethernet |
ASSEMBLE THE MINER
CHECK THE MINER BEFORE POWER ON
- Check the warranty sticker is well or not, especially the hashboards PSU port side. If the warranty sticker is damaged when you received the miner, please contact our After-sales.
- Before you power on the miner, shake the miner softly, if you can hear the sound of metal banging on metal, please contact our After-sales.
- Check if the fan work well, if you find the fans broken please contact our After-sales.
CONNECT THE PSU
Every hash board needs to be inserted with 2 PSU cable, controller only needs 1 PSU cable according to the following image .
Note: Please contact out after-sales team if there is a hashboard not work.
CONNECT THE ETHERNET CABLE
Insert one end of the Ethernet cable into the router and the other end into
the slot shown in the following image.
IP SET button:
Press it 1–4 seconds, it will (1) show the IP of the miner in the “Set IP”
tool; (2) change the miner to Static IP mode and modify the IP to the IP range
you set in the “Set IP” tool Press it 4–15 seconds, the miner will become to
DHCP and the settings of the miner should be restore to default. Press it more
than 20 seconds to switch the Dynamic (Static) IP to Static (Dynamic)
RESET button: Your miner will restart if you press it. It wont recover your
settings to the default.
OPERATE THE MINER
ENTER THE MINER CONSOLE
DHCP(the Normal led on the control board should be blinking) is the default IP
mode of the miner, find the IP via the router or the IP scanner.Enter the IP
of the miner on the browser and press the Enter button. The chrome is the
suggested browser.
SET UP THE POOL
Note: Please don’t use the Default pool.
CHECK THE HASHRATE OF THE MINER
After set up the pool, the miner will mine for you.
NETWORK CONFIGURATION
OTHER PAGES
OVERVIEW
UPGRADE
MODIFY THE PASSWORD
REBOOT
FACTORY RESET
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>