INNOSILICON T2T-25T BTC Power Consumption 1980 W Bitcoin Miner User Manual

INNOSILICON T2T-25T BTC Power Consumption 1980 W Bitcoin Miner

OVERVIEW

• Part Number: T2T-25T
• Algorithm: Sha256
• Size (L×W×H): 391mm(L)141mm(W)220mm(H)
• Net Weight: 9.0KG
• Operating Temperature: 0-40 ℃ (device junction temperature)
• Network Connection: Ethernet

Typical Hashrate and Power Dissipation of the Four Mode:（You can set the mode follw the manual 3.5.1)

Mode            Performance          Factory                Balance Efficient
Hashrate       25TH±5%               23TH±5%           21TH±5%         20TH±5%
Power dissipation 2050+10%      1880W+10%        1550W+10%      1360W+10%

ASSEMBLE THE MINER

CHECK THE MINER BEFORE POWER ON

• Check the warranty sticker is well or not, especially the hashboards PSU port side. If the warranty sticker is damaged when you received the miner, please contact our After-sales.
• Before you power on the miner, shake the miner softly, if you can hear the sound of metal banging on metal, please contact our After-sales.
• Check if the fan work well, if you find the fans broken please contact our After-sales.
• The cable connection should be same as it arrived.

CONNECT THE PSU

Note: The sequence of the PSU cable should be same with the follow picture。Change the sequence of the PSU cable will void the warranty.

Connect the miner and the router by the Ethernet cable, then the miner can start to run after power on the miner.

1. IP SET button:
   Press it 1—4 seconds, it will (1) show the IP of the miner in the “Set IP” tool; (2) change the miner to Static IP mode and modify the IP to the IP range you set in the “Set IP” tool
   Press it 4—15 seconds, the miner will become to DHCP and the settings of the miner should be restore to default.
   Press it more than 20 seconds to switch the Dynamic (Static) IP to Static (Dynamic)

2. RESET button: Your miner will restart if you press it..

3. Fault led: light means the network connection is bad

4. Normal led: Solid means Static IP mode;Blinking means DHCP mode(DHCP)

OPERATE THE MINER

ENTER THE MINER CONSOLE
DHCP is the default IP mode of the miner, find the IP via the router or the IP scanner. Enter the IP of the miner on the browser and press the Enter button. Chrome is the suggested browser. (Please try with dragonadmin If the password admin is invalid)

SET UP THE POOL

Please use the suggested pool as below:

1. ckpool: stratum+tcp://cn.ckpool.org:443 or stratum+tcp://pool.ckpool.org:3333
2. slushpool: stratum+tcp://stratum.slushpool.com:3333
3. f2pool: stratum+tcp://btc-65536.f2pool.com:3333
4. btc.top: stratum+tcp://t2.btc.top:8888 or stratum+tcp://bak.t2.btc.top:3333
5. poolin: stratum+tcp://btc-bj.ss.poolin.com:1800 or stratum+tcp://btc-sz.ss.poolin.com:1800

CHECK THE HASHRATE OF THE MINER

After set up the pool, the miner will mine for you.

NETWORK CONFIGURATION

OTHER PAGES

CHANGE THE OPERATE MODE
There are 4 modes can be choosed, please click the “Save” after you set the mode.

OVERVIEW

UPGRADE MODIFY THE PASSWORD

FACTORY RESET

Documents / Resources

| INNOSILICON T2T-25T BTC Power Consumption 1980 W Bitcoin Miner [pdf] User Manual
T2T-25T BTC, Power Consumption 1980 W Bitcoin Miner
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>