saco Washer/Dryer Smeg WD1/12C Instruction Manual

saco Washer/Dryer Smeg WD1/12C Instruction Manual

Operating Instructions – Washer/Dryer Smeg WD1/12C

Control Panel

A. Open door button
B. ON-OFF and programme selection knob
C. Time remaining shown on display LED
D. Spin speed shown on display LED
E. Drying time for delicates shown on display LED
F. Drying time for cottons shown on display LED
G. Display
H. Select spin speed button
I. Select programme and drying time button
L. Select programme and drying time button enabled LED
M. Options buttons
N Options enabled LED’s
O. Start-Pause button
P. Start-Pause button LED

Using the Machine

1. Open the door and load the washing taking care to distribute it uniformly, loosely and not packed into the drum; alternate large items with small ones if possible.

2. The washer dryer described in this manual can be loaded with up to 5kg of washing. Heavier loads will lead to unsatisfactory washing results and may cause the machine to work incorrectly.

3. To save energy, wash full loads divided by type of fabric, according to the quantities indicated in the “Programmes chart” supplied with this manual.

4. Close the door by pressing it against the body of the appliance until you hear a click. Make sure no garments have got caught between the door and the rubber gasket.

5. Add the detergent:
   
   Pour the pre-wash powder detergent into the compartment marked “1”. Pour main wash detergent into compartment “2”. Machine accessories include a red insert “A” that can be placed inside compartment “2” to allow liquid detergent to be used. The additives are automatically introduced into the tub during final rinsing. Pour liquid additives such as starch and fabric softener into “3”.

6. Switch on the machine. To switch on the machine and select programmes, proceed as follows: 1. Turn the programme knob in either direction. 2. Select the washing temperature, within the sectors marked on the front panel by the following words:
   • Cotton / coloureds
   • Wool
   • Synthetics, delicates

7. Start the washing machine. Before starting the selected programme, carefully close the door, open the water tap and add the detergent and additive. Press the “Start-Pause” button. The LED located above the Start-Pause button remains lit throughout the cycle. After starting, the display shows the time remaining until the end of the programme. The LED remains on throughout the cycle.

8. End of the cycle. The washing programmes are automatically completed, the display shows END and the “Time remaining” LED lights up.
   1. Turn the programmes knob to OFF to switch off the machine.
   2. Open the door. 3. Remove the washing from the drum.
   4. Leave the door ajar in order to allow the inside of the washer dryer to dry.
   5. Turn off the water tap.

Using the Drying Programme

When the washing cycle has terminated, programme drying as follows:

1.  Switch off the machine by turning the select washing/drying programmes knob to OFF.
2. Turn the knob to the drying programme marked with
3. Select the spin speed with the select spin speed button ( ) and remember that the spin option is only possible for the intensive drying programme (“+”) and for drying times ranging from 1h 30’ to 2h
4. Select the drying time and programme (intensive or delicate)
5. Press the “Start-Pause” button to begin the drying programme.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>