saco Room Apartment Heating Instruction Manual

June 5, 2024
saco

Room Apartment Heating
Instruction Manual

Operating Instructions — Apartment heating

  • Open the flap on the right-hand side of the control panel. You will see several buttons including one named ‘Prog’
  • There are 6 events all set up with different times and temperatures. You can customize these to suit you.
  • Press PROG once to move to Event 1. The time on the display screen will flash. If you want to change the time use the + or – button to amend the time
  • Then press the PROG button again to set the temperature you desire. The temperature on the display screen will flash. If you want to change the temperature use the + or – button to amend it. To get the heating effective set the temperature to 23 degrees or above
  • Press PROG to move to Event 2. Follow the same process as Event 1 to move between the time and temperature settings. Note that if you are happy with the pre-set time you don’t need to press + or -, you just move on to the temperature setting by pressing PROG for the 2nd time
  • Press PROG to move to Event 3 and continue the same steps until you get to the last event which Is Event 6. Once completed setting Event 6 press the button SET which will lock in all the changes you have made to the 6 events
  • As you move through each event on the display screen On the middle right side it will show which event you are on display as PS/P2/P3/P4/PS/P6

Please be aware that as the heating is underfloor it doesn’t heat up immediately and does take some time but once it’s up and running it is very effective.

Documents / Resources

| saco Room Apartment Heating [pdf] Instruction Manual
Room Apartment Heating
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals