saco Bosch SMV40C30GB Dishwasher Instructions
- June 4, 2024
- saco
Table of Contents
Bosch SMV40C30GB Dishwasher
Operating Instructions – Dishwasher Bosch SMV40C30GB
Control Panel
- ON/OFF switch
- Timer programming*
- Additional options**
- Programme**
- Button <
- Button >
- Cleaning display
- Dry display
- START button
- Rinse aid refill indicator
- Salt refill indicator
- Display “Check water supply”
*Depending on model
**Number depending on model
Switching on the appliance
- Switch the ON/OFF switch
- Rotate programme selector to the required programme. The expected programme duration flashes on the digital display.
- Press START button. The programme starts running.
Remaining running time display When the programme is selected, the remaining
running time of the programme is indicated on the digital display.
End of programme The programme has ended when the value 0:00 is indicated on
the numerical display. To save energy, the dishwasher is switched off 1 minute
after the programme ends.
At the end of the programme please open the door fully and not partially when emptying the dishwasher. Remove the utensils when they have cooled down.
Interrupting the programme
- Switch off ON/OFF switch, the LEDs go out. The programme is saved.
- If the door was opened on an appliance which has a warm water connection or is heated, first leave the door ajar for several minutes and then close. Otherwise, expansion (pressure) may cause the appliance door to spring open or water to run out of the appliance.
- To continue the programme, switch on the ON/OFF switch again.
Overview of Programmes
Select a suitable programme according to the type of utensils and degree of soiling.
Additional Options
Express Wash/Speed Perfect/(VarioSpeed)*
This function can reduce the running time by approx. 20-50% depending on the selected rinse programme. The change in the running time is indicated on the digital display. To obtain optimum cleaning results at a reduced running time, water and energy consumption are increased.
Half Load *
If you have only a few items to wash you can switch to “half load”. This will save water, energy and time. It is recommended to put a little less detergent in the detergent dispense than for a full load.
The temperature is increased during the cleaning process. This increases the hygiene status. This additional option is ideal for cleaning e.g. chopping boards and baby bottles.
Perfect for a mixed load. You can wash very soiled pots and pans in the lower basket together with normally soiled utensils in the upper basket. The spray pressure in the lower basket is intensified, the rinsing temperature is increased slightly.
An increased temperature during the final rinse and an extended drying phase ensure that even plastic parts dry better. There is a slight increase in the energy consumption.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>