Meimotor 174317322740 DC Motor Speed Controller Instruction Manual
- June 6, 2024
- Meimotor
Table of Contents
Meimotor 174317322740 DC Motor Speed Controller Instruction Manual
TECHNICAL PARAMETERS
- Working power supply: DC 8V-24V, 40mA
- Display mode: 0.56 LED, four-digit reading
- Measuring range: 10-9999
- Measuring accuracy: ±0.1%, reading ±1 word
- Display refresh rate: >3 times/sec
- Over-range display: “—-“
PRECAUTIONS FOR USE
- Connect the plug correctly according to the wiring diagram.
- The Hall switch is NPN normally open, and the detection distance of the Hall switch needs to be within 10mm. The installation diameter of the Hall switch is 12mm, and the wire length is within 1 meter.
- Should avoid strong electromagnetic interference, it is better to use shielded wire or twisted-pair wire for measuring wire.
- Avoid the same tube or twisted wiring with other such as strong current wires or power wires to avoid unnecessary interference. If necessary, please use shielded wires and connect the shielding layer to the counting terminal “+”.
- The magnet cannot be installed on the metal iron material, it will interfere with the detection of the meter. The magnet has front and back sides, and no data can be detected if it is installed incorrectly.
- The product is not suitable for testing in a vibration environment, which will cause the reading to jump or be inaccurate.
- It is not recommended to use mechanical switches or micro-switches, because their lifespan is relatively short and they are easy to miscount after a long time; for example, when using mechanical switches or micro-switches, please try to use better quality to avoid miscounting. It is strongly recommended Use a magnetic switch.
PRODUCT SPECIFICATIONS
- Size: 79mm43mm26mm
- Net weight: 79.5g
Customer Support
Website: http://www.meimotor.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>