XTECH XTH-650 Hera Stereo Headphones with Microphone and Wireless Technology User Guide

: June 6, 2024
: XTECH

Table of Contents

Introduction
Package content
Product components
Basic operation
Advanced operation
Technical specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

XTECH XTH-650 Hera Stereo Headphones with Microphone and Wireless Technology User Guide

Introduction

Thank you for purchasing the XTH-650 stereo headphones with Bluetooth® wireless technology. We encourage you to read this quick installation guide thoroughly to get the most of this innovative wireless headphones.

Main features

Lightweight stereo headphones with microphone and wireless technology
Soft padded and adjustable headband for a comfortable on-ear fit
40mm drivers deliver crisp and natural sound from various audio sources
Foldable design for compact mobility
On-board controls for power, music and phone call management
Features a Micro SD™ card slot and a 3.5mm auxiliary port to play audio from non-Bluetooth® devices
Multicolor LED lights with running effects
Supports MP3, WAV format files playback
Battery status indicator on compatible devices

Package content

Stereo headphones
MicroUSB charging cable
3.5mm auxiliary cable
User’s manual

Product components

Adjustable and foldable headband
On-Off/Play-Pause and Answer-end calls : Press and hold this button to power the device ON/OFF. Briefly press it to play and pause media.
- In hands-free mode, press this button to answer and end a call.
- Press and hold this button to reject an incoming call.
- Press twice to dial the last number called (on supported devices).
Mode button: Press this button briefly to toggle between the available playback modes: Bluetooth®, FM and Micro SDTM/TF (the Micro SDTM mode is only called out when the Micro SDTM card is inserted). Press and hold this button to turn the LED lights running effect on or off.
Volume Up button : Press this buttons briefly to increase the audio level of the headphones. Press and hold this button to play the Next track. There will be a tone warning when the volume has reached its maximum level.
Volume Down button : Press this buttons briefly to reduce the audio level of the headphones. Press and hold this button to play the Previous track. There will be a tone warning when the volume has reached its minimum level.
Micro USB charging port: Insert the supplied Micro USB cable here to recharge the battery.
Built-in microphone: For hands-free calling and conferencing.
Micro SD™ (TF) card slot: Use it to playback music files stored in a Micro SD™ memory card.
LED status indicator light:
3.5mm Auxiliary port: Use it for wired playback. When an auxiliary cable is connected, the Bluetooth® mode is disabled automatically. While listening to music via the auxiliary input, use the controls from your source device to manage all playback functions.

Basic operation

Charging your headphones

Plug one end of the supplied Micro USB cable into the headphones’ Micro USB port and the other end to the USB port of your computer or to a 5V USB adapter to charge the battery.
Make sure that the headphones are fully charged before using it for the first time.
The headphones battery has to be initially charged for around 3 hours. Thereafter, the battery will take about 2.5 hours to recharge.

Advanced operation

Pairing the headphones with your mobile phone

Press and hold the On/Off button on the left ear cup for about 3 seconds to turn on the device. The headphones will automatically connect to the Bluetooth® mode. A voice prompt will be heard indicating that the device is ON and in Bluetooth® mode.
Next, set your Bluetooth® mobile device to “discover” the wireless headphones.
Place both devices not more than one meter away from each other.
The LED blinks blue and green alternatively to indicate that the device has entered into the pairing mode and it is ready to be detectable for the first time.
On your mobile phone, tap the newly discovered audio device (XTH 650) being displayed in the Bluetooth® list.
When the headphones ask if you want to pair with it, click Yes or OK to accept.
If you have a lower Bluetooth® version, you may be prompted to enter the passkey 0000 (4 zeros)
If pairing is successful, another voice prompt will be heard and the LED light will turn blue. If after 60 seconds the pairing process fails, please repeat steps 1 through 7 described above.
The headphones will go off, if it is not connected to BT mode after about five minutes of inactivity.
Status| LED indication
---|---
Battery charging status| Red LED glows steady while charging. When it is fully charged the LED goes off and the blue LED indicator turns on.
Power on status| Blue LED indicator turns on.
Pairing status and

Bluetooth® mode

| Blue and green LED lights flashing alternatively when pairing. Blue LED stays solid when the wireless connection has been established and blinks in blue when streaming audio in Bluetooth®mode.
Micro SD™ (TF) mode| Green LED indicator blinks slowly.
Auxiliary mode| Insert the 3.5mm auxiliary cable to activate the Auxiliary mode.
Hands-free mode| Blue LED blinks slowly during a call
10. Turn it off when not in use to save battery power.
Note: The headphones will automatically re-pair with the last connected device once they have been turn off and on again.

Using the wireless headphones

Answering and ending a call using your mobile phone

When there is an incoming call, briefly press the button to pick it up. You may also press the answer button on your cellular phone to take the call.
To end a call, simply press the button once again. Likewise, you may also finish the call directly using the end key on your cell phone.
To reject or ignore an incoming call, press and hold the button for about 3 seconds.
If you want to redial the last number called, quickly press the button twice.

Technical specifications

MPN	XTH-650

Estimated battery run time depending on usage and volume settings Range estimate is based on an area free and clear of obstacles and interference, and within the line-of-sight between both Bluetooth® V5.0 devices

Precautions

Do NOT drop, hit or shake the device.
Do NOT disassemble, repair or modify the headphones yourself.
Do NOT use cleaning products that contain benzene, solvents or alcohol.
Do NOT expose the device to excessive heat or to direct sunlight for long periods of time.
Do NOT store the device in a place with high humidity or dust.
Do NOT place heavy objects on top of the headphones.
Do NOT use near a microwave oven or wireless LAN products

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.