Redmi Buds 3 Lite Manual: Comprehensive User Guide & Troubleshooting

The Redmi Buds 3 Lite User Manual is a comprehensive guide that provides detailed instructions on how to use the Xiaomi BHR5489GL Redmi 3 Lite Buds. It is essential to read this manual carefully before using the product and retain it for future reference. The illustrations of the product, accessories, and user interface in the manual are for reference purposes only. The actual product and functions may vary due to product enhancements. The manual covers various aspects of the product, including charging, turning on and off, wearing, connection, function overview, specifications, and important safety information. It provides step-by-step instructions on how to connect the earbuds to other devices, reset them, and use their various functions. The manual also includes important safety information that users must adhere to when using the product to avoid damage to the battery or the product. Overall, the Redmi Buds 3 Lite User Manual is an essential guide for users who want to make the most of their Xiaomi BHR5489GL Redmi 3 Lite Buds.

Xiaomi BHR5489GL Redmi 3 Lite Buds User Manual

Xiaomi BHR5489GL Redmi 3 Lite Buds User Manual

Read this manual carefully before use, and retain it for future reference. Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.

Product Overview

Charging

• Before use, please remove the protective film from the contact points on both earbuds and fully charge the charging case and the buds.
• Connect the charging cable to the charging case and keep the earbuds inside the case to charge simultaneously.
• When the charging case is not fully charged, its indicator is white. When it is fully charged, its indicator is off.

Turning On Make sure the charging case is not out of battery with earbuds in it. The earbuds will automatically turn on when removed from the charging case. Turning Off

• Make sure the charging case is not out of battery. Place both earbuds in the charging case and the indicators on them will turn white. The earbuds will automatically disconnect and start charging, and turn off once being fully charged.
• When the earbuds enter the pairing state and are out of the charging case, they will be automatically turned off if not connecting to any device within 10 minutes.

Wearing

• Gently place the earbud into your ear canal, then adjust it to a comfortable position.
• During calls, make sure to point the primary microphone towards your mouth for clearer calls. Note: The M-size ear tips and L-size ear hooks are pre-installed on the earbuds. If they are not suitable, please replace them with a proper size.

Connection

First time connection Open the lid and take out the earbuds. When the indicators on both earbuds slowly blink white, it means the earbuds can be connected. Enable the Bluetooth function on your phone, and then search and tap “Redmi Buds 3 Lite” to connect the earbuds. Note: If the earbuds cannot be connected, place them back into the charging case, close the lid and repeat the above operation. Connecting to other devices Disable the Bluetooth connection of the paired phone or reset the earbuds to connect to other devices.

Reset Earbuds

If the earbuds cannot connect properly, please carry out the following steps to reset them. Make sure the charging case is not out of battery before reset. Open the lid of the charging case and place both earbuds in the case. Press and hold the multi-function touch areas on both earbuds for at least five seconds and then release. Indicators on both earbuds will blink white three times, indicating the earbuds have been reset successfully. (The connection records between the left and right earbuds, and the earbuds and the phone have been cleared.)

Function Overview

Answer/End calls Double tap the left/right earbud’s multi-function touch area to answer a call; and tap the left/right earbud’s multi-function touch area three times to decline or hang up the call. Play/Pause music Press and hold the left/right earbud’s multi-function touch area to pause/play the audio. Play next track When playing audio, double tap the earbud’s multi- function touch area to play the next track. Answer a second call Double- tap the left/right earbud’s multi-function touch area to put the ongoing call on hold and answer the incoming call. After answering the second incoming call, double-tap the multi-function touch area to switch between the two calls. And tap the left/right earbud’s multi-function touch area three times to hang up the current call and answer the call on hold. Wake up the phone’s voice assistant When wearing the earbuds (not during a call), tap the multi- function touch area three times to wake up the voice assistant. The device connected to the earbuds needs to support the voice assistant function. Switch between single/dual bud mode When both buds are connected successfully, they are in dual-bud mode. If place one of the buds back into the charging case and close its lid, the other bud will automatically enter the single-bud mode. When removing the second bud from the charging case, the dual-bud mode will automatically be restored again. Automatic connection Once the earbuds are taken out of the charging case, they will automatically connect to the most recently used Bluetooth device. If the earbuds are not connected to any device, they will automatically enter the awaiting connection mode. Disconnected When the device’s Bluetooth is disabled or when it manually disconnects from the earbuds, the earbuds will automatically enter the awaiting connection state. If no device is connected within 10 minutes, the earbuds will turn off automatically. Low latency mode When the earbuds are connected to the phone (not during a call), simultaneously press and hold the multi-function touch areas of the left and the right earbuds to enable the low latency mode. Once the low latency mode is enabled, simultaneously press and hold the multi-function touch areas of the left and the right earbuds or put both earbuds into the charging case to disable the low latency mode. Note: Once the weather is cold outdoors and your hands become dry, the buds may not function when touching them.

Specifications

Important Safety Information

• The product has a built-in battery that can not be removed or replaced. To avoid damage to the battery or the product, do not disassemble or modify the battery by yourself. The battery can only be replaced by the authorized service providers and must be replaced with the same type. Replacement of a battery with an incorrect type may defeat a safeguard (such as catching fire, explosion and leakage of corrosive electrolyte). Do not dispose of used batteries with household waste. Disposal of this product and the used batteries shall comply with local laws and regulations.
• Do not attempt to disassemble, repair or modify the product, as this may cause fire or even completely damage the product.
• Keep the product’s indicator away from the eyes of children and animals while the product is in use.
• Do not disassemble, puncture or crush the product nor expose it to fire.
• Please stop using the product immediately and seek medical assistance if the contact area on your skin shows signs of redness or swelling.
• To prevent possible hearing loss, do not use high volume for long periods of time.
• This product is not a toy and may contain small parts. Please keep them out of the reach of children.
• Disposal of a battery into fire or a hot oven or water or other liquids or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Product information and certification marks are located in the Charging Case. = The symbol indicates DC voltage.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Xiaomi Inc. is under license. Other trademarks and trade names are those of their respective owners. EU DECLARATION OF CONFORMITY Hereby, Dongguan Yingsheng Electronic Technology Co., Ltd. declares that the radio equipment type M2110E1 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html WEEE Information All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. UK CA Hereby, Dongguan Yingsheng Electronic Technology Co., Ltd. declares that the radio equipment type M2110E1 is in compliance with Radio Equipment Regulations 2017. The full text of the UKCA declaration of conformity is available at the following internet address: https://www.mi.com/uk/service/support/declaration.html

FC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

• The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

FCC ID: 2A3OD-M2110E1 IC: 27978-M2110E1 CAN ICES-003(B)/NMB-003(B) Complles With IMDA Standards DB106135 Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Dongguan Yingsheng Electronic Technology Co., Ltd. (a Mi Ecosystem company) Address: Suite 204, 4th Block, No. 86 Hongtu Road, Nancheng District,Dongguan, Guangdong, China. For further information, please go to www.mi.com User Manual Version: V1.0

FAQS

What’s in the box?

wireless earbuds 3 lite

Do they work with iphone?

Yes, they work perfectly with iPhone.

Do these bluetooth wireless earbuds work with all iPhones?

Yes it is . It’s easy to connect with all phone iPad and tablet as well.

iOS compatibility?

100 % compatibility

Son originales?

Yes, it is original. It has a code in the box. You can validate it in official Xiaomi site.

How clear are calls to the person you’re talking to?

Really good quality of voice, it have call noise cancellation

Are these also used for talking?

Yes! They have microphones but don’t work well. If you’re inside they are just fine, outside not that good and get worse when it is windy! But for the price I think that they are awesome buds! $20 and they sound reasonable good!

can u use just one in one ear?

Yes

Do these come with charging cord?

Yes, they come with a roughly 6″ USB cable. Note that the case holds a charge and can recharge the pods. So you plug the cable into the case and the pods charge in the case.

Are these real xiaomi?

Yes

Is redmi buds 3 good?

The Xiaomi Buds 3 are what I’d call a mid to high-end device. These earphones deliver high-quality audio with sound that’s well represented on the entire frequency range, from low to mid and high frequencies. In short,  they sound really well.

Does redmi buds 3 Lite have noise Cancelling?

Noise cancellation for callsHigh-resolution audio for calls and anti- interference technologyEnjoy seamless, clear calls with effective anti- interference technology.  Redmi Buds 3 Lite uses a noise-reduction algorithm to identify and extract human voices and reduce background noise , ensuring clarity for your calls.

Is Redmi Buds 3 waterproof?

IP54 dust and water resistantAdvanced protection features, there when you need themThe earbuds of the Redmi Buds 3 have been expertly designed to meet IP54* dust and water resistance standards ( level 5 dustproof and level 4 water- resistant ), making the earbuds safe from spills and sweat.

How do you know if redmi buds 3 Lite is fully charged?

Connect the charging cable to the charging case and keep the earbuds inside the case to charge simultaneously. When the charging case is not fully charged, its indicator is white. When it is fully charged,  its indicator is off.

What is TWs?

It’s called  True Wireless Stereo  (TWS), and it’s a unique Bluetooth feature that will let you enjoy true stereo sound quality without the use of cables or wires. TWS works as follows: You pair a primary Bluetooth speaker to your preferred Bluetooth-enabled audio source.

Does redmi buds 3 Lite have mic?

Xiaomi True Wireless Earbuds Redmi Buds 3 lite, Bluetooth 5.2 Low Latency Headphones Waterproof Stereo Earphones in Ear Touch Control Headset  with Mic  Deep Bass for Sport, Gaming and Running, Black.

Does Redmi Buds 3 have wireless charging?

With fast charging, the earphones can charge for just 10 minutes and then allow you to listen to music for up to 3 hours. If the battery is running low, take a short break and let it power up.  The charging case also supports Qi wireless charging , making charging super convenient.

Is higher TWS better?

Bigger size in dynamic drivers almost always means a more vigorous, immersive listening experience especially in the bass frequency range. A dynamic driver with 14.2mm diameter outshines an absolute majority of current TWS models on the market.

How long does redmi buds 3 take to charge?

Actual time may vary depending on usage conditions. * 10-minute fast charge  requires the charging case to have at least 20% battery life remaining. Use your earbuds for up to 90 minutes after a 10-minute fast charge. Tested using advanced audio coding (AAC) at 50% volume.

What is latency earbuds?

In computing terms, Latency simply means  a delay. A delay in audio in comparison to the video. The device connected to your earbuds, speakers, or headphones transmits a sound. Now the delay in receiving and playing that sound is latency.

Which is better earbuds or AirPods?

Bluetooth earbuds can last for 6hrs of listening time per single charge and about 12 hours when charging. I recommend  Airpods if you like listening to music or podcasts for a prolonged period of time because they provide a better listening experience overall.

Is TWS a good brand?

They are just like the airpods, have  excellent battery life and sound quality , along with a nice little battery case.

How do you increase bass in TWS?

All you have to do is  pull the current rubber tip off and put another on it. You know when you have the right-sized ear tip when it’s comfortable for you, and you hear a noticeably better sound. When you have the right size, you can feel the bass a bit.

How do I charge the Redmi Buds 3 Lite?

Connect the charging cable to the charging case and keep the earbuds inside the case to charge simultaneously.

How do I turn on the Redmi Buds 3 Lite?

The earbuds will automatically turn on when removed from the charging case.

How do I turn off the Redmi Buds 3 Lite?

Place both earbuds in the charging case and the indicators on them will turn white. The earbuds will automatically disconnect and start charging, and turn off once being fully charged.

How do I wear the Redmi Buds 3 Lite?

Gently place the earbud into your ear canal, then adjust it to a comfortable position.

How do I connect the Redmi Buds 3 Lite to my device?

Open the lid and take out the earbuds. When the indicators on both earbuds slowly blink white, it means the earbuds can be connected. Enable the Bluetooth function on your phone, and then search and tap “Redmi Buds 3 Lite” to connect the earbuds.

How do I reset the Redmi Buds 3 Lite?

Open the lid of the charging case and place both earbuds in the case. Press and hold the multi-function touch areas on both earbuds for at least five seconds and then release. Indicators on both earbuds will blink white three times, indicating the earbuds have been reset successfully.

How do I answer or end calls with the Redmi Buds 3 Lite?

Double tap the left/right earbud’s multi-function touch area to answer a call; and tap the left/right earbud’s multi-function touch area three times to decline or hang up the call.

How do I play or pause music with the Redmi Buds 3 Lite?

Press and hold the left/right earbud’s multi-function touch area to pause/play the audio.

How do I switch between single and dual bud mode with the Redmi Buds 3 Lite?

When both buds are connected successfully, they are in dual-bud mode. If you place one of the buds back into the charging case and close its lid, the other bud will automatically enter the single-bud mode. When removing the second bud from the charging case, the dual-bud mode will automatically e restored again.

How do I enable low latency mode with the Redmi Buds 3 Lite?

When the earbuds are connected to the phone (not during a call), simultaneously press and hold the multi-function touch areas of the left and the right earbuds to enable the low latency mode.

How do I dispose of used batteries with the Redmi Buds 3 Lite?

Do not dispose of used batteries with household waste. Disposal of this product and the used batteries shall comply with local laws and regulations.

Is 50 ms latency good?

In gaming, any amounts below a ping of 20 ms are considered exceptional and “low ping,” amounts between 50 ms and 100 ms range from  very good to average , while a ping of 150 ms or more is less desirable and deemed “high ping.”

VIDEO

www.mi.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>