ROYQUEEN G30 Wireless Bluetooth Speaker User Manual

June 6, 2024
ROYQUEEN

G30 User Manual

Dear customer,
Thank you for purchasing the outdoor Bluetooth speaker G30. To ensure correct operation, please read this user manual carefully before operation.

Important Safety Instructions

  • Do not use the speaker in special cold and hot environments.
  • Please avoid the speaker dropping or hitting with a hard object, it may cause other hardware damage.
  • Take care when charging the speaker, excessive prolonged charging will damage the battery lifetime. Charge the speaker to full capacity when using for the first time.
  • When the battery is low, the indicator light will flash and the voice prompt “battery low”, please charge the speaker in time.
  • It does not use this speaker for a long time, please charge at least once within one month, in order to prevent the lithium battery from causing and damaging because of excessive consumption.
  • Adjust the volume to the appropriate level to avoid disturbing others.

Features

  • Bluetooth Music
    Bluetooth 5.0 stereo music playing

  • USB Music playing
    At MP3/WAV music format

  • Water-resistance at IPX4

  • Voice guide

The speaker will prompt the working mode and status for easy operation.

Technical Data

Driver: 43mm Driver 1 + Passive radiator 1
Bluetooth Version: JLAC6925B BLUETOOTH 5.0
Output:5W
FM Frequency: 87.5MHz ~ 108MHz
Size: 9849.175.2mm
Playing Time: 8 hours at 50% volume
Net Weight: 190g

Package Contents

Bluetooth Speaker, TYPE-C Cable, User Manual

Slot and Keys

Power On&Off / Mode Switching
Play / Pause
Next Track / Volume +
Previous Track / Volume –
Charging slot
USB Slot

Operation Instructions

Power on/off
Long press button: Power on/off the speaker
Long press button: Switch the working mode for Bluetooth mode, USB music playing mode.
(The default working mode is Bluetooth mode.)

Bluetooth

  1. Short press  the button to switch Bluetooth working mode.
  2. Turn on the Bluetooth of your phone, search for nearby devices. The G30 will be found on your mobile pairing list, please connect it. When connected, the speaker will prompt “Device paired” and the LED indicator will stop twinkle in blue.
  3. Please turn on your phone’s music player, and the speaker will play the selected music.
  4. The speaker will pair with the latest used Bluetooth device automatically. Long press the button to disconnect the current Bluetooth connection. The speaker will prompt “Device disconnected”. Then other Bluetooth devices can find and pair with the speaker.

TWS(True Wireless Stereo) function (only works in Bluetooth mode)

  1. Power on 2pcs G30 (ensure both speakers are in Bluetooth waiting to pair status).

  2. Press and hold the button and button for 3 seconds sync on either one speaker can turn on/turn off TWS function.

  3. Once two speakers are paired, the speaker button light indicator flashing in blue is the master speaker,the other one button light off is the slave speaker. Under the TWS mode, all the keys of the master speaker can be operated, except for the mode key
    of the slave speaker, all the other keys can be operated.

  4. Use your phone to pair the master speaker G30, and play Bluetooth music on both speakers.

  5. Press and hold the button and button for 8 seconds sync to clear the TWS pairing memory.

Note:

  1. Two speakers for True Wireless Stereo connection, and should be waiting for Bluetooth pair.
  2. Under TWS mode, if you turn off one of the speakers, then another speaker will be turned off automatically.
  3. The two speakers will be reconnected automatically after the first connection once in the connection range (except for clearing the TWS pairing memory

USB Music Playing

Insert the USB Flash Disk into the speaker, short press the button to enter the USB mode, the speaker will prompt “USB mode”, Then the speaker will play the USB music directly.
Please Note: The USB Flash Disk supports memory up to 32G, and supports the audio format at MP3, WAV.

Button functions in Bluetooth/USB mode:

Buttons

|

Music Functions

---|---
| Long press for previous track
Short press to decrease the volume
| Long press for next track
Short press to increase the volume
| Short press for play/pause/Mute
| Long press to power on/off
Short press to switch the working mode

Intelligent power saving function

The speaker will be automatically powered off in the below cases:

  1. Under Bluetooth mode, the speaker is waiting to pair for more than 10 minutes.
  2. Under USB mode, if press the button to pause/mute for more than 10 minutes.
    Note: Please long press the button again to power on the speaker

Charging
When the speaker with low battery capacity, the speaker will prompt “battery low”, please

charge the battery via a USB adaptor immediately. During charging, the LED indicator will remain on orange. When fully charged, the LED indicator will be off.

Note:
Please use a good quality adaptor to charge the speaker.
We suggest use the adaptor specification at 5V/1A
When the speaker with low battery capacity, please charge the speaker immediately The speaker can be charged by a different charging current if using the computer to charge the speaker, as the current is only at 500 mA, the charging time will be very long.

Troubleshooting

  1. What should I do if the speaker can not pair with the Bluetooth device and play music accordingly?
    (1) Please check the specification/ the manual of the Bluetooth device (your mobile or computer), and check if the device can support the A2DP stereo audio transmission. If yes, please turn on the A2DP stereo mode.
    (2) Ensure the speaker is under the Bluetooth pairing status, if there are many Bluetooth devices nearby, the G30 will not easy to be find. Please turn off other Bluetooth devices.

  2. What should I do if the speaker gets stuck and all the buttons can not work?
    The speaker’s inner system may be wrong with some inappropriate operation. Please try to long-press the button and hold for 8 seconds to reset the speaker’s software.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
FCC ID: 2ADOR-G30

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals