ROYQUEEN G30 Portable Bluetooth Speakers User Manual
- June 5, 2024
- ROYQUEEN
Table of Contents
ROYQUEEN G30 Portable Bluetooth Speakers
Buttons & Slot and port
Short press Next track 1 Long press Increase the volume i• Double press Switch to the nextfolder (under TF card mode} Short press Play/ Pause / Mute, ! Long press Clear Bluetooth pairing Toggle song loop mode (under TF card mode} Short press Previ ous track . Long press Decrease the volume Double press Switch to the previous folder(under TF card mode}
Short Long pprreessss SPwower on /off itch the working mode to Bluetooth mode or i TF card mode Blue light flash slowly Waiting for Bluetooth pairing Blue light flash fast Waiting for TWS pairing Blue light on Working status/ Bluetooth paired successful Red light on Charging Red light off Fully charged
- Press and hold the + button and the – button at the same time can turn on/turn off TWS function
Bluetooth Mode
Power on the speaker and short press the( ) button to choose Bluetooth mode. The light indicator will twinkle. Search the “ROYQUEEN G30” in your device and connect it
- G30 can remember the last pairing device (except clearing pairing} and automatic reconnect to the devices. Long press the button can disconnect the current Bluetooth connection, other Bluetooth devices can find and pair with the speaker.
TF Card Mode
Inserting the Micro SD Card into the speaker and choosing the TF Card Mode then the speaker wi ll play the Micro SD card music directly Please note that the Micro SD card support memory capacity up to 32G and support the audio format at MP3, WAV
TWS (True Wireless Stereo) Function
-
Power on two G30 Speakers and switch to the bluetooth mode, press and hold one of the speaker’s + button and the = button at the same time, the speaker wi ll search the other G30 speaker and connect automatically. When the two stereo TWS speakers connect successfully, the blue light flashing is the left channel, the light off one is rig ht channel.
-
Repeat the Bluetooth connection operation, connect the Bluetooth device to the speaker (connect the left channel machine automatically}. After a successful connection, play the device’ s music and you can get a stereophonic effect
Note: -
(this function need two G30 speakers and both are waiting for Bluetooth pairing status.
-
In TWS mode, turn off one of the speakers, the other wil I shut down syn ch ro nous ly
-
After the first successful connection, the subsequent two speakers will automatically connect again while they are waiting for Bluetooth pairing status (except clearing pairing memory}.
intelligent power-saving function
In Bluetooth mode, if the speaker is waiting for pairing more than 10 minutes, it will be powered off automatically.
- Please long press(!) button to power on the speaker again.
Charging
When the speaker sends out a low power alarm, it means the low batter y,
please charge the speaker immediately
Note:
Please use the good quality adaptor to charge the speaker. We suggest to use
the adaptor speci fication at 5V/ 1A The speaker can be charged by different
charging current, i f using the computer to charge the speaker, as the current
only at 500 mA, the charging time will be very long.
Technical Data
- Voice Prompt Output: SW
- Built-in battery: 3.7V 1800 mAh
- Playing time: 8~ 16h
- Charging time: 3h (5V 1A}
- Cabinet Material: ABS+Fabric
- Waterproof Rating: IP66
- Dimension: 3.932 inches/ 9.97.55 cm
- Net Wei ght: 6.7oz/190g
FCC WARNING
This device complies wi th part 15 of the FCC Rules. Operati on is subject to
the following two conditions: (1} this device may not cause harmful
interference, and (2} this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment
NOTE: This equipment has been tested and found to com ply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These Ii
mits a re designed to provide reasonable protection against harmful
interference in a residential installati on. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a part i cular i nsta I lat ion. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reori ent or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different
from that to which the recei ver is connected. -
Consult the dealer or an experi enced radio/ T V technician for help.
The device has been evaluated to meet general RF exposure requirement The device can be used in portable exposure condition without restriction
Product Service Regulations
Product Customer Service ROYQUEEN Bluetooth speakers provide one year warranty If you have any problem during use, please feel free to contact us via Amaz on or 24h after-sales support, we wi ll reply you as soon as possible to help you solve the problem.
Email: rq_support@royqueen.hk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>