KZ-T10 Wireless ANC Headphones Instructions

June 6, 2024
KZ

KZ-T10 Wireless ANC Headphones

KZ-T10 Wireless ANC Headphones

Thank you for purchasing this product.
Please read the operating instructions carefully before use and keep them properly for future use.

Headphones safety precautions

Warning:
To reduce the risk of fire, electric shock, or product damage, the following points should be noted:

  • Keep the earphones away from rain and moisture.
  •  Please use the recommended attachment.
  •  Do not remove the headphones cover.
  •  Do not repair your headphones by yourself.Please contact the qualified service personnel for the repairs.
  • Avoid using or placing headphones near the heat source.
  • Do not use your headphones to listen at high volume where the ambient sound needs to be heard to be safe (such as a railway intersection or construction site).
  •  Please follow the airline’s instructions when using headphones in flight. You may not be allowed to use it on some flights.Please contact your upcoming flight for more details.

Precautions for listening with headphones

  • Excessive sound pressure from headphones can cause hearing damage.
  • Do not use headphones at a high volume. Hearing experts advise against listening to earphones for long periods of time.

If you feel ringing in your ears, lower the volume of your headphones or stop using it.
Do not use headphones while driving. Because it can cause an accident and is illegal in many areas. In the event of a possible accident, you should exercise extreme caution or temporarily discontinue use it.

Please use the attached USB charging cable when connecting the computer.
Wireless headphones may be disturbed by the radio waves of the mobile phone during use. If this interference occurs, put the mobile phone away from the headphones.

Safety of battery

  • Do not disassemble, bump, squeeze or throw battery into fire.
  • Do not continue to use if there is serious swelling on battery.
  • Do not place battery in high temperature environment.
  •  Do not use after the battery is soaked in water!

Maintenance of headphones

Please clean the headphones with a soft dry cloth.
Do not use solvents, including gasoline, dilutions, alcohol, kitchen detergent, chemical wipe cloth, etc.This may cause external deformation or coating shedding.

Attachment list

KZ-T10 Wireless ANC Headphones FIG 1

Saf ety of charging
The headphone has a built-in rechargeable battery. Please fully charge the battery before using the earphone to ensure the best battery power and life. Connect the headphones to the charger using the original charging cable (attached). Check the plug direction, hold the plug, insert and pull out flat. (If the plug is tilted or inserted in the wrong direction, the plug may deform, resulting in failure).

KZ-T10 Wireless ANC Headphones FIG 2

Battery Low Prompt LED
In charging / Red light keeps on
Fully charged / BRleudelilgighht flt aksehewpsithona
Low battery Battery Low warning tone

Single battery life: about 38 hours in ANC/ Transparent mode, about 33 hours in music mode.

Single battery life: about 38 hours in ANC/ Transparent mode, about 33 hours in music mode.

Component name

KZ-T10 Wireless ANC Headphones FIG 3

Power on / off

Power on
Push the power button to the ON position
Power off
Push the power button to the OFF position

KZ-T10 Wireless ANC Headphones FIG 4

Bluetooth connection pairing

  1. Place the Bluetooth device to be connected within 10 meters of the headphone.

  2. After the headphone is turned on, push the power key to the top, the headphone enters the pairing state.

  3. Turn on Bluetooth device to search and connect [KZ-T10].
    KZ-T10 Wireless ANC Headphones FIG 5

  4. Headphone is successfully paired with the player device when you heard “Connected” .

  5. After the first pairing, the headphone will automatically connect to the player each time when it is turned on.
    *Ensure Bluetooth of the player is turned on; otherwise, the automatic connection will be fail.

  6. The headphone will automatically shut down after 5 minutes if they are not successfully connected to the player device.
    Hold down ANC +MFB buttons for 3 seconds to remove pairing information of headphones.

KZ-T10 Wireless ANC Headphones FIG 6

How to reset the headphone

*Clearing the headphone pairing information can solve most problems such as unsuccessful headphone connections.
Long press ANC +MFB button for 3 seconds, the red and blue lights on for 2 seconds, and the reset is successful.

Music mode

Volume up
Turn the wheel clockwise to increase the volume
Volume down
Turn the wheel counterclockwise to lower the volume
*There will be a prompt when the volume is set to maximum or minimum.
Last song/ Next song
Double-click the ANC key to switch to the last song. Click the ANC key to switch to the next song.

Calling mode

Pick up / Hang up
Click MFB button to answer a new call. Click MFB button again to end the current call.
Three-way calling
Double-click MFB button to remain the current call and answer the new call.
In a three-way call, double-click MFB button to switch between the current call and the reserved call.
In a three-party call, press MFB button to end the current call and switch to the reserved call.

Active noise-cancellation mode
Volume and sound quality will be changed when ANC mode is turned on.
About active noise-cancellation mode
You can choose one of the following modes according to your preference.
Default mode is set to Normal Mode.

  1. Ambient Mode
  2. ANC Mode
  3. Normal Mode

When switching to different mode, you may hear very slight noise,this is normal and does not indicate any product fault.

How to switch between Ambient/ANC /Normal Mode

KZ-T10 Wireless ANC Headphones FIG 10

Long press ANC button for 2 seconds to switch between 3 models.

KZ-T10 Wireless ANC Headphones FIG 11

  • weight: 283±5g
  • Frequency range: 20-20KHz
  • Impedance: 32Ω
  • Sensitivity: 101dB
  • Battery life: 33H
  • Bluetooth version: Bluetooth5.0
  • Charging port :TYPE-C
  • Headphone battery : 800mAh
  • Transmission  distance: more than the 10m

Note: This manual is for reference only and subject to change without prior notice.
Designed by Shenzhen Yuanze Electronics Co., Ltd.
Address: Room 105, room 2008, Digital Culture Pioneer Park, East side of Hubin Road, Area 2, Longjing Community, Xin ‘an Street, Bao ‘an District, Shenzhen city, Guangdong Province Manufacturer: Dongguan Yuanze Acoustics Technology Co., Ltd.
Address: Room 902, Building 1, No.323, Liaobu Jinxing Road, Liaobu Town, Dongguan city, Guangdong Province
Email: sales@kzhifi.com

Product warranty card

Warranty Regulations

When purchasing this product, please read the following warranty terms carefully to ensure that the product has a valid warranty.

  • This warranty card is required for the warranty of headphones.
  •  The product warranty period is one year, during the warranty period, if the product has non-human quality problems, the company will provide free repair and replacement after verification.
  • The warranty card is not allowed to be altered or forged.

If the product is damaged and cannot be used normally due to the following reasons, it will be beyond the warranty scope.

  • Product damaged caused by not following the instructions.
  • All damage caused by man-made, accidental and natural disasters.
  • Product damage caused by maintenance, modification, disassembly and other reasons not approved by our company.
  • The headphone shell appears aging, damage, scratches and other phenomena

After the warranty period expires, users can still get the maintenance service of our company and only need to pay the corresponding maintenance fee.
Our company reserves the right to modify and interpret the contents of the warranty card.

User info

User name
ID
Product model
Purchase date
Phone number
Contact address
Agency

For any problems with the product, please contact our company promptly. Thanks for buying our product, wish you a happy life!

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help.
    The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals