Shenzhen Siweier Technology 43191609 Bone Conduction Headphone Instructions
- June 6, 2024
- Shenzhen Siweier Technology
Table of Contents
Manual Instruction for Bone
Conduction Headphones
Summary of button functions
- Power On/OffNolume up
- Volume down
- LED indicator
- charging port
- Multifuction Button: Pause/Play/Answer Phone Call/ End Phone Call/ Next Track/ Last Track/ Voice Assistant
- Microphone
Controls
On: When the headphone is in a power-off state, press and hold the power
button for 3 seconds with blue LEO flickering, reminding tone: power on.
Off: When the headphone is in power-on state, press and hold the power
button for 5 seconds with red LED flickering once, reminding tone: power off.
Connect BT: When the headphone is in a power-off state, press and hold it
for 3 seconds to enter a pairing state with red and blue LEDs flickering and
reminding tone; palling. After the device (smartphone. tablet computer, etc.)
discovers D006Press it to connect.
Connected successfully: When the headphone Is successfully linked to the
device, a blue LED will flicker every 3 seconds with a reminding tone:
Connected
Pause/Play: When the music Is on. single click the multi-function button
to pause or play.
Answer/Hang-up: click the multi-function button to answer when there Is
an Incoming call. Click the multi-function button to end the ongoing call.
Vol+: Press the Vol+ once to turn up the volume.
Vol-: Press the Vol- once to turn down the volume.
Next Track : Double-click the multi-function button skip to the next
track.
Last Track: Triple-click the multi-function button skip to the last
track.
Assistant: Long press the multi-function button for 3 seconds to enter
the Voice Assitant model. Long press 3 seconds again to exit the Voice
Assitant model
Reset: After plugging the USB charging line, the headphone will be reset
and powered off for charging.
Clear all paring info: Long press the Power On/Off button and Volume down
button for 5 seconds simultaneously
Charging: In case of using a USB charging line for charging, connect the
headphone with the USB power. During the charging, the LED turns red. After
charging, the LED turns blue.
How to wear
Hang the headphone behind your neck with both speakers clinging to your cheekbones. After that, adjust it until you feel comfortable.
Specifications
Music play time Standard: ……………………………….6 hours
Standby time …………………………………………………..20 days
Charging time ………………………………………………….2hours
BT version ……………………………………………………………..5.0
Speaker impedance ………………………………………….100t3db
Microphone sensitivity ……………………………………..40±2db
Product weight ……………………………………………………….29g
Connection distance …………………………………………15 meters
Attentions
- Please wear the bone-conduction speakers of the headphone at your cheekbones before your ears and do not put them in your ears.
- Listening to music for an excessively long time make you feel uncomfortable, please try to use a medium volume instead of a big one.
- No matter how the volume is, please do not make it prevent you from hearing the surrounding sounds. Please take care when using the headphone.
- Do not throw, press the headphone or put it in the water.
- The headphone should keep away from fire, water, and high voltage devices.
- It is not for children’s use as it contains small parts.
- Please do not treat it as domestic waste. Instead, send it to your electrical and electronic recycling station.
If there is any injury or property loss due to a violation of the above contents, we will not bear any responsibility.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>