hama 00205324 8K HDMI Switch Bidirectional Instruction Manual

00 205324
8K HDMI™ Switch, bidirectional

Operating Instructions

00205324 8K HDMI Switch Bidirectional

Thank you for choosing this Hama product!
Take your time and read the following instructions and information completely.Pleasekeep these instructions in asafe place for futurereference.

Explanation of warning symbols and notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specifichazards and risks.
Note
This symbol is used to indicate additional information or important notes.

Package contents

• 8KHDMI “bidirectional”switch
• Operating instructions
• 2xdisposal slips (Triman/WEEE)

Safety instructions

• The product is intended for private, non-commercial use only.
• Use the product only for the intended purpose.
• Protect the product from dirt, moistureand overheating and use it in dry rooms only.
• Children should be supervised to ensurethat they do not play with the product.
• Donot bend or crush the cable.
• Donot drop the product and do not expose it to any major shocks.
• Dispose of packaging material immediately in accordance with the locally applicable regulations
• Donot modify the product in any way.Doing so voids the warranty.
• Donot attempt to service or repair the product yourself.Leave any and allservice work to qualified experts.
• Donot open the device or continue to operate it if it becomes damaged.
• Donot use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• Only use the article under moderate climatic conditions.
• Aswith allelectrical products, this device should be kept out of the reach of children.
• Donot use the product in adamp environment and avoid splashing water.
• Route allcables so thereisnorisk of tripping.

Description

• The 8K HDMI switch from Hama is a2-way, manual, bidirectional switch for HDMI™ connections.
• Noextrapower supply required, power is supplied via the connected devices.

Functions

• Switching from 1HDMI™ signal source (e.g. Blu-ray player,console, PC) to 2HDMI™ monitors (Pic. 1a; Pic.1b)
• Switching from 2HDMI™ signal sources (e.g. Blu-ray player,console, PC) to 1HDMI™ monitor (Pic.1c; Pic.1d)

Installation/connection

• Connect your devices to the 8K HDMI “bidirectional”switch using suitable HDMI cables (see Pic. 1a -Pic. 1d).
• Toswitch the signal sources or monitors, select the button on the top of thedevice. The active connection is indicated by an illuminated LED   on the front.

Note
Forperfect 8K signal transmission, the total length of the cables should not exceed 4metres.
Forlonger signal paths, we recommend the use of active HDMI cables.

Troubleshooting

• the correct connection of allcables
• whether the correct channel is set on the output device
• whether alldevices are switched on
No sound| Check that alldevices are properly connected and switched on.

Care and maintenance

Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

• Only clean this product using alint-free, slightly damp cloth and do not use any harsh cleaners.
• Ensurethat no water is able to enter the product.

Warranty disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improperinstallation/mounting,improper use of the product or from failuretoobserve the operating instructionsand/or safety notes.

Technical data

1080i/1080p@240Hz
1440p@144Hz
4K@120Hz
8K@60Hz
Max. video bandwidth| 48 Gbit/s /1200 MHz
Transfer| Bidirectional
Dimensions (L x WxH)| 74 x32x15 mm

Hama GmbH &CoKG
86652 Monheim /Germany
Service &Support
www.hama.com
+49 9091 502-0
Alllistedbrandsare trademarks of thecorresponding companies.
Errors andomissions excepted,and subjecttotechnical changes.
Ourgeneral termsofdeliveryand paymentare applied.
00205324/02.24

References

• hama.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>