Xander CSAZ-150 Computer Case User Manual
- June 12, 2024
- Xander
Table of Contents
Xander CSAZ-150 Computer Case User Manual
Specifications
Model
Model Name:| Xander
Model Number:| CSAZ-150
Specifications|
Type:| Micro ATX Mid Tower
Color:| Black/Black(interior)
Side Panel Window:| Left side panel: slidable tempered glass panel
Max CPU Cooler Height:| UP to 175mm
Max Video Card Length:| Up to 340mm long video card
Power Supply:| Not included
Motherboard Compatibility:| Micro ATX、ITX
Expansion
External 5.25″ Drive Bays:| 0
Internal 2.5″ Drive Bays:| Up to 4
Internal 3.5″ Drive Bays:| Up to 2
Expansion Slots:| 4
Top Ports:| Power button, LED button, HD Audio, USB 3.0 x 2
Physical Specifications| 410x220x381 / 16.1×8.7×15 inches
Weight:| 5.1g /11.3lbs
Features
Tempered Glass Sides Window:| High-quality tempered glass side window allows
for clear visuals to inner components
Addressable RGB Light Effects:| All ARGB light sync. devices connected to the
ARGB control board, allowing the LED button or switch to the motherboard
software to directly control the ARGB lighting.
Available Fan Ports:
| 3x120mm or 2x140mm Fan ports in the front(2x120mm LFO-4412D ARGB fan
included) 3x120mm or 2x140mm Fan ports on the top1x120mm Fan port in the
rear(1x120mm LFO-4412D ARGB fan included)
Water Cooling:| Supports radiators up to 240/280mm on the top Supports
radiators up to 240/280mm in the front
Dust Filters:| Removable (magnetic) dustproof net on the top and front, dust
filter on bottom of chassis.
Power Supply Support:| Bottom mounted ATX Power Supply
Chassis Parts
| 1 | Front panel |
|---|---|
| 2 | Metal side panel |
| 3 | Tempered glass panel |
| 4 | Removable magnetic mesh |
| 5 | Hard disk cage |
| 6 | 3.5” HDD/ 2.5” SSD brackets |
| 7 | 2.5” SSD tray x 2 |
| 8 | Chassis |
| 9 | Dust filter mesh |
Control Panel Functions
| **** | POWER |
|---|---|
| **** | LED |
| **** | Mic |
| **** | Audio |
| **** | USB 3.0 |
| **** | USB 3.0 |
3.5 ˝/ 2.5˝ HDD/SSD Installation
▪Supports up to 390mm long video cards.
- Multifunctional hard disk bracket support 3.5” HDD or 2.5” SSD x 1 (A).
- 2.5″ SSD metal tray support 2.5” SSD x 2 (G)
- Multifunctional hard disk cage support 3.5” HDD or 2.5” SSD x 1 (B)
Remove the left glass side panel
Cooling System Installation
Front
Rear
Top
Master Fan & Sub-fan Installation
Fan Installation
| CONNECTOR| CONNECTION
---|---|---
①| Reset (LED) S/W (2pin)| LED Button
②| ARGB LED 5V (3pin) female connector| The 5V/3pin ARGB socket of the
motherboard
③| Fan Connector| The master Fan connect to the sub-fan
④| Fan Connector PWM (4pin)| CHA_FANx socket of the motherboard
⑤| SATA| Power Supply
⑥| ARGB LED 5V (3pin) male connector| Other 5V/3pin ARGB devices
- Before the fan starts, please make sure the PWM connector and SATA connector each are connected
- Press the LED button to cycle through different RGB lighting modes, all ARGB devices are controlled by the LED button. (make sure the other 3pin ARGB devices are connected with ⑥)
- Ensure ② insert the motherboard, and hold the LED button for 3 seconds to switch the RGB control function to the motherboard RGB sync. software. Press 1 second LED button, and switch the RGB control function to the LED button.
RGB Lighting Switching
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>