Soundcore Life Q30 Wireless Over-Ear Headphones User Manual
- June 5, 2024
- Soundcore
Table of Contents
Soundcore Life Q30 Wireless Over-Ear Headphones
Charging
- Fully dry off the USB port before
- Use the provided or certifed USB-C charging cable and charger to prevent any damage.
- Do not power on your headphone while
| Flashing red once every 60 seconds| Low battery
---|---|---
| Steady red| Being charged
| Light off| Fully charged
Powering On/Off
Press and hold the power button for 3 seconds to power on/off.
Bluetooth Pairing
- When powered off, press and hold the power button for 5 seconds until the LED flashes blue to enter the Bluetooth pairing mode.
- Select “Soundcore Life Q30” on your device’s Bluetooth list to connect
| **** | Flashing blue | Bluetooth pairing |
|---|---|---|
| **** | Steady blue | Bluetooth connected |
Pairing with another device
When successfully connected with the frst device, press twice the power button to pair up with another device.
- Your Soundcore headphone can only play music on one mobile device at a To play from another connected device, pause the currently active device frst.
- Each time you power on your Soundcore headphone, it will automatically connect to your last successfully connected device if available within the Bluetooth
Button Controls
Play/Pause| | Press
Next track| | Press and hold for 1 second
Previous track| ____| Press and hold for 1 second
Volume up/down| ****| Press
Answer/End a call| ****
| ****
Press
Put the current call on hold and answer a new incoming call
Reject a call| ****
| ****
Press and hold for 1 second
Switch between held call and active call
NFC Mode
Near Field Communication (NFC) is a technology that enables short-range wireless communication between various NFC compatible devices, such as mobile phones and IC tags. If your Bluetooth device supports NFC, you can connect it with your headphone easily.
- Enable the NFC feature on your Bluetooth device (iOS devices excluded).
- Tap the right panel of your headphones with the back of your Bluetooth device
Noise Cancellation Mode
To reduce ambient noise, turn on the active noise cancellation mode by pressing the NC button. Press the NC button again to turn off.
Transparency Mode
To stay aware of your surroundings by allowing ambient sounds in, touch the right panel for 1 second to activate the transparency mode.
AUX Mode
Play audio on an external device by plugging in a 3.5mm AUX cable.
Soundcore App
Download the Soundcore App for an enhanced experience with your headphones. EQ settings: There are more than 20 EQ settings you can choose from in the App to optimize your experience while enjoying different music genres. Noise cancellation: Choose an active noise cancellation mode to reduce ambient noise according to your surroundings.
-
Transport: Targets low-end frequencies like engine and road noise for peaceful journeys and commutes.
-
Outdoor: Reduces ambient sounds in cities for less
-
Indoor: Reduces voices and mid-frequency noise from coffee shops and other inside spaces. Transparency: Stay aware of your surroundings by allowing ambient sounds in. White noise soundscape: Tailor your own white noise soundscape when you need to rest.
Reset
You might need to reset your headphone if you experience any connectivity problems or function issues. Press and hold the power button and volume up button simultaneously for 5 seconds until the LED indicator flashes blue and red alternately twice.
Specifications
Specifications|
---|---
Specifcations are subject to change without notice.
Input| 5 V 0.65 A
Charging time| 2 hours
Playtime (with ANC mode turned on)| 40 hours
Playtime (with ANC mode turned off)| 60 hours
Driver size| 40 mm × 2
Frequency response| 20 Hz – 20 kHz
Impedance| 16 Q
Bluetooth version| V5.0
Bluetooth range| 15 m / 49.5 ft