Nooie IPC500 Cam Pro Wireless Spotlight User Manual

Nooie IPC500 Cam Pro Wireless Spotlight

Nooie Cam Pro

Product Overview

Base Station 2nd Gen

IMPORTANT: Nooie Cam Pro has different package options that may or may not include a Base Station. Please check your product packaging for the included items.

Setup

1. Download the None app, if you don’t already have it; create an account.
2.  Launch the Nooie app, tap on Add Device and choose Nooie Cam Pro.
3. Follow instructions to connect the camera to the Base Station
   and internet.

• 1 Base Station can connect up to 4 battery-powered cameras (Nooie Cam Doorbell or Nooie Cam Pro).

LED Indicator

Nooie Cam Pro

• Flashing Blue
  Ready to pair

• Steady White & Blue
  Pairing Successful

• Flashing Blue & Orange (rapidly) Pairing Failed

• Flashing Blue & Orange (slowly) Firmware is being updated

• Flashing Orange
  Offline

• Steady Orange
  Charging

LED Indicator
Base Station 2nd G en

• Flashing Blue
  Ready to pair

• Steady Blue
  Connection Successful

• Flashing Blue & Orange (rapidly) Connection Failed

• Flashing Blue & Orange (slowly) Firmware is being updated

• Flashing Orange
  Offline

• Steady Orange
  Malfunction

Installation

Mount the Wall Mount Plate on the wall with the provided screws.

Attach the Magnetic Mount Base to the Wall Mount Plate.

Attach the Cam Pro to the Magnetic Mount Base, adjust the angle as needed.

Caution

1. Operating temperature is -4° to 113°F; avoid exposure to extreme heat or cold.
2. Nooie Cam Pro is weatherproof, rated IP65, however, do not immerse in water.
3. Please do not attempt to disassemble.
4. Please do not install the camera where the use of wireless devices is prohibited.
5. Keep away from children at all times.
6. Do not place in any environment that may block ventilation opening, or impede airflow.
7. Do not place near any heat source or appliance that its heat.
8. Do not place in direct sunlight at any time.

Compatible With

• Please see instructions in the Nooie app’s device settings to connect your device to supported third-party controls.

Warranty Terms

1. 12-month limited warranty.
2.  Receive timely customer service nooie.com/support
3. Lifetime technical support was provided by Nooie.

Customer Care
Hey, did we forget something?
Check out the FAQ on our website: nooie.com/support

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or m odifications to this unit not expressly. Approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment complied with FCC radiation exposure lim its set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body. The device has been evaluated to meet general RF exposure requirements. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

ISED Canada Statement:
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science andEconomic Development Canada’s license exempt RSS(s). Operation is subject to the following two conditions:

1. this device may not cause interference and
2.  this device must acceptany interference, including interference that may cause undesired operation of the device.

Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment
To maintain compliance with IC’s RF Exposure guidelincs,
This cquipment should be.installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>