nooie NCA01 Air Purifier User Manual
- June 9, 2024
- Nooie
Table of Contents
nooie NCA01 Air Purifier User Manual
Product Overview
Packing List
Setup the Air Purifier
Prepare the Air Purifier
- Before plugging in the device, remove the (2) Hepa filters from the base unit and take off the protective plastic.
- Replace the (2) Hepa filters back in the base unit. Place the filter cover on the unit and secure.
- Plug in using the provided AC power adapter.
Setup the App
- Download the Nooie App from the App Store (Apple) or Play Store (Android).
- Create an account or sign in.
- Select the(+) symbol in the top right. Under “Add Device”, select Nooie Air Purifier.
- If the Wi-Fi indicator is not flashing, press the Silent Mode button for about 5 seconds until the Wi-Fi indicator begins to flash.
- Follow the instructions in the app to connect the Air Purifier to your Wi-Fi network. Ensure you select a 2.4 GHz network; 5 GHz Wi-Fi is not supported.
- Once connected, create a name for the Air Purifier to complete the setup.
Install HEPA Filters
Step 1: Open the filter cover on the bottom of the Air Purifier.
Step 2: Remove the protective plastic from the HEPA filters.
Step 3: Insert the HEPA filters into the Air Purifier and secure the filter
cover.
Air Purifier Control Panel
Mode
Select and switch fan speed (Auto, Low, Medium or High)
Power Button
Manually turn the Air Purifier ON or OFF
Silent Mode
The fan speed adjusts to a lower quieter speed when selected.
App Control Panel
Air Quality Status
Displays current air quality.
ON/OFF Switch
Turns the Air Purifier ON or OFF
Auto Mode
The fan speed will automatically adjust to the needs of the air quality.
Silent Mode
The fan speed adjusts to a lower quieter speed when selected.
Manual Speed Mode
Move the slider from Low to High to adjust the fan speed.
Schedule
Set a schedule and mode to run automatically.
Settings
Access child lock, light, reset filter, and factory data reset.
Troubleshooting Tips
Q: Why doesn’t my Nooie Air Purifier turn on?
A: Make sure the base unit is securely plugged into a working outlet then
press the power button to start the air purification.
Q: My Nooie Air Purifier is offline.
A: Check the Wi-Fi and power connections to the Air Purifier base unit. If
both are working properly, reset and re-pair the base unit with the Nooie app.
Select “Silent Mode” using the Control Panel button and hold for 5 seconds to
reset the Air Purifier.
Q: How often do I need to change the HEPA filters?
A: Under Settings, there is a Filter Life indicator that will notify you when
the HEPA filters need to be replaced. One filter will last for 3 months, and
two for 6 months. You can purchase replacement filters at
nooie.com.
Safety
Filter Change Reminder
Remember to change the filter when the remaining Filter Life is low in the
app.
TO REDUCE THE RISK OF ELECTRICAL SHOCK, FIRE, OR INJURY:
- Do not plug or unplug the power adapter when your hands are wet.
- Do not block or obstruct the air intake or outflow. If airflow is restricted, turn the Air Purifier off and unplug it from the electrical outlet.
- Do not use in environments with high humidity or heavy smoke.
- Do not use if the Air Purifier appears damaged, is left outdoors, or submerged in water.
Support
Need Help?
The Nooie Customer Care Team is available 24/7. Contact us through nooie.com
or email us at support@nooie.com
Tell Us What You Think
Share your feedback, and get two additional HEPA filters for FREE! Follow the
instructions below to redeem:
Step 1: Write a review on Nooie.com or in our Amazon store.
Step 2: Send an email to support@nooie.com with a
photo of your HEPA filter.
Step 3: Nooie will contact you within 48 hours, and ship two new HEPA filters
to you for free.
Thank you for your review!
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate
using an antenna of a type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen that the
equivalent isotopically radiated
power (e.i.r.p.) is not more than that necessary for successful communication.
Designed in USA
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>