nooie B09FLH5RFM Baby Monitor with Crying Detection Instructions
- June 16, 2024
- Nooie
Table of Contents
nooie B09FLH5RFM Baby Monitor with Crying Detection Instructions
Client Information
| Applicant | : | Nooie LLC |
|---|---|---|
| Address | : | 1603 s main st, suite A, Milpitas, California, United |
States, 95035
Manufacturer| :| Nooie LLC
Address| :| 1603 s main st, suite A, Milpitas, California, United
States, 95035
General Description of EUT
| EUT Name | : | Nooie Indoor Cam 1080P, Baby Cam |
|---|---|---|
| Models No. | : | IPC007, IPC007D |
| Model Different | : | All these models are identical in the same PCB, |
layout and electrical circuit, the only difference is model name for
commercial.
Product Description| **:| Operation Frequency:|
802.11b/g/n(HT20): 2412MHz~2462MHz802.11n (HT40): 2422MHz~2452MHz
** RF Output Power:| 802.11b: 17.48dBm802.11g: 15.60dBm802.11n (HT20):
13.71dBm802.11n (HT40): 13.90dBm
Antenna Gain:| 3.71dBi PIFA Antenna
Modulation Type:| 802.11b: DSSS(CCK, DQPSK, DBPSK)802.11g/n:
OFDM(BPSK,QPSK,16QAM,64QAM)
**Power Supply| ****:| AC/DC adapter(Model:TPA-46B050100UU):
Input:AC100-240V, 0.2A, 50/60HzOutput: DC 5V 1A
Software Version| :| V1.0
Hardware Version| :| V1.0
Connecting I/O Port(S)| :**| Please refer to the User’s Manual
MPE Calculations for WIFI
1. Antenna Gain:
Internal Antenna: 3.71dBi.
2. EUT Operation Condition:
Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually.
3. Exposure Evaluation:
Equation from page 18 of OET Bulletin 65, Edition 97-01
S=(PG)/4πR2
Where
S : power density
P : power input to the antenna
G : power gain of the antenna in the direction of interest relative to an isotropic radiator.
R : distance to the center of radiation of the antenna
Test Result
**Mode| Conducted Power(max) (dBm)| Turn-up Power (dB)|
Max tune up power (dBm) [P]| ANT Gain (dBi) [G]| Distance
(cm) [R]| Power Density (mW/ cm 2 ) [S]
---|---|---|---|---|---|---
802.11b| 17.48| 17 ± 1| 18| 3.71| 20|
0.02949
802.11g| 15.60| 15 ± 1| 16| 3.71| 20|
0.01861
802.11n (HT20)| 13.71| 13 ± 1| 14| 3.71| 20|
0.01174
802.11n (HT40)| 13.90| 13 ± 1| 14| 3.71| 20|
0.01174**
Conclusion:
As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE),
Limits for General Population/ Uncontrolled Exposure
| Frequency Range (MHz) | Power density (mW/ cm 2) |
|---|---|
| 300-1,500 | F/1500 |
| 1,500-100,000 | 1.0 |
For 802.11b/g/n:2412~2462 MHz MPE limit S: 1mW/ cm2
The MPE is calculated as 0.02949mW / cm 2 < limit 1mW / cm2. So, RF exposure limit warning or SAR test are not required.
The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b).
The RF Exposure Information page from the manual is included here for reference.
Note
For a more detailed features description, please refer to the RF Test Report.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>