Richmat HJC18 Ble Control Box Instructions
- June 6, 2024
- Richmat
Table of Contents
Richmat HJC18 Ble Control Box Instructions
-
Remark: Up to motors
BLE control available
Memory function Color: black -
Dimension đ
-
System configuration diagram
**** -
Remote control button silicone diagram
-
Remote control function description
| Button label | function |
|---|---|
| 1 | The head motor extends. |
| 2 | The foot motor extends. |
| 3 | The head motor retracts. |
| 4 | The foot motor retracts. |
5
| The motor runs to the M1 position (with an initial value) with one key. Multiplexing function: flashlight + M1, the backlight flashes twice, entering the one-key release mode can reset the memory positions of M1 and M2 to the
factory default settings at the same time.
6| The motor runs to the M2 position with one key (there is
an initial value).
7
| Press the flashlight to light up and automatically turn off after 15s. Multiplexing function: press and hold the flashlight button for 5 seconds, the backlight flashes, release the flashlight, press M1 or M2 within 2 seconds, the control box âbeep beep beepâ will memorize the current
position, if not press M1 or within 2 seconds M2 exits the edit memory position mode;
8
| FLAT one-key reset, all motors retract to the minimum stroke position (not reset after power-on). Multiplexing function: press FLAT and flashlight at the same time for 3s, the backlight flashes 3 times, and enter the
continuous pressing mode at this time.
Note: Press any button for more than 50s, the remote control will enter sleep, release it and press it again to resume the function. The one-key release mode can follow the synchronization, and the
continuous pressing mode does not follow the synchronization.
SecureCom V-4072 Mini Dome Indoor/Outdoor Wi-Fi HD Video Camera
Installation Guide