Richmat Smart home HJH129B Ble Instructions
- June 3, 2024
- Richmat
Table of Contents
Smart home HJH129B Ble
Instructions
Remote control button silicone diagram
Remote control function description
Button label | Function |
---|---|
1 | Press the button, the motor runs to the memory position ZG with one button |
Multiplexing function: long press FLAT+ZG for about 3s, the buzzer will sound,
and the current motor position will be recorded to ZG.
2| Press the button, the motor will run to the memory position M1 with one
button Multiplexing function: long press FLAT+ M1 for about 3s, the buzzer
will sound, and the current motor position will be recorded to Ml.
3| The head motor extends.
4| The foot motor extends.
5| One key reset, all motors retract to the minimum stroke position.
6| Head motor retracts.
7| Foot motor retracts.
Coding method: [Remote head up + foot up (3,4) + control box pairing key]
The buzzer sounds, indicating that the pairing is successful.
Precautions:
To protect the reliability and safety of the motor and control box, do not
switch the buttons frequently.
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>