Formovie L032FGN Laser Projector User Guide
- June 6, 2024
- Formovie
Table of Contents
Formovie L032FGN Laser Projector
Overview
In Menu: Move Up / Down to Select
In Playback: Increase / Decrease the Volume
In Menu: Move Right / Left to Select
In Playback: Previous / Next
Short Press: Return to the Previous Menu
Long Press: Back to Homepage
S hort Press: Confirm
Long Press: Bring Up the Menu
Connections and Ports
Power and Plug
Adjustment
iOS Settings
Android Settings
Placing
Do not place any objects within 20 cm of the air vents.
Specification
Basic Information|
Name
| Laser Projector
---|---|---
Item Dimensions|
150.8x83x24.6mm
Net Weight
|
0.3kg
Electrical Specifications|
Power Consumption
|
Rated Power 25 W; Standby Power < 0.5 W External Adapter, 15V~2A
Rated Input
|
TI DLP
Optical Parameters|
Display Technology
|
ALPD Laser
Standard Resolution
|
960x540p (qHD)
Projection Parameters|
Projection ratio (TR)
| 1.2 : 1
Screen Size|
40″ to 100″
Lens Focus
| Manual Focus
Keystone Correction|
Auto vertical keystone
Connectivity|
USB
| USB 2.0
HDMI|
HDMI 1.4
Screen Casting
|
Android & iOS supported
Audio|
Speaker
|
0.8 W
Others|
Noise Level
| ≤ 30 dB(A) viewing mode
@ ambient temperature of 25 °C
Storage Temperature/Humidity|
-20°C to 55°C / ≤ 90%
Operating Temperature/Humidity
|
0°C to 40°C / 20%–80%
Photobiological and Laser Safety Information
For Europe
The product complies with IEC 60825-1:2014 Class 1 and RG0 IEC 62471-5:2015.
For U.S.A.
Complies with 21 CFR 1040.10 and 1040.11 except for conformance as a Risk
Group 0 LIP as defined in IEC 62471-5:Ed. 1.0. For more information see Laser
Notice No. 57, dated May 8, 2019.
CAUTION:
- Notice is given to supervise children and to never allow them to stare into the projector beam at any distance from the projector.
- Notice is given to use caution when using the remote control for starting the projector while in front of the projection lens.
- Notice is given to the user to avoid the use of optical aids such as binoculars or telescopes inside the beam.
The product marking and safety information are located at the bottom of the product.
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste. Instead, you should protect human health and the environment
by handing over your waste equipment to a designated collection point for the
recycling of waste electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about
the location as well as terms and conditions of such collection points.
Hereby, [Formovie (Chongqing) Innovative Technology Co., Ltd.] declares that
the radio equipment type [Laser Projector / L032FGN] is in compliance with
Directive 2014/53/EU and Radio Equipment Regulations 2017. The full text of
the declaration of conformity is available at the following internet address:
http://www.formovie.com/global/service/support/declaration.html
Wi-Fi 2.4G maximum transmitter power : 100mW at 2.4GHz – 2.4835GHz
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Note: This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
RF Exposure Information: The radiated output power of this device meets the
limits of FCC radio frequency exposure limits.This device should be operated
with a minimum separation distance of 20cm (8 inches) between the equipment
and a person’s body.
Battery Warning:
- Risk of explosion if the battery is replaced by an incorrect type.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Manufacturer: Formovie (Chongqing) Innovative Technology Co., Ltd.
Address: 4-401, # 2 Longgang Road, Guojiatuo Area, Jiangbei District,
Chongqing, China