Formovie Chongqing Innovative Technology Co Ltd YNN3213 Xming Episode One Smart Projector User Manual

Formovie Chongqing Innovative Technology Co Ltd YNN3213 Xming Episode One

Smart Projector

Product Specifications

• Model: —————
• Power: ————-
• Dimensions: 5OCTV2TQLGEVQT
• Weight: #FCRVGT

Product Usage Instructions

Installation

1. Unpack the product carefully.
2. Place the product on a flat and stable surface.
3. Connect the necessary cables following the provided diagram.

Operation

1. Turn on the product by pressing the power button.
2. Use the control panel to adjust settings as needed.
3. Refer to the user manual for specific functions and troubleshooting tips.

Maintenance

1. Regularly clean the product with a soft, dry cloth.
2. Avoid exposing the product to extreme temperatures or moisture.
3. Check for loose connections and tighten if necessary.

Frequently Asked Questions (FAQ):

Q: How do I reset the product to its factory settings?

• A: To reset the product, locate the reset button on the back panel and press it for 10 seconds.

Q: What should I do if the product stops working suddenly?

• A: Check the power source and connections first. If the issue persists, contact customer support for further assistance.

What’s in the box

• When opening the packaging, check the contents of the box against the list below. If anything is missing, please contact the seller in due time.

Note:

• The actual contents may vary depending on the country (or region) of sale, please refer to the actual product.
• Retain the original packaging for future storage or transportation.

Getting Started

• Determine the distance between the projector and the wall or screen according to the desired screen size.
• Screen Dimensions (SD): The diagonal size of the projection screen (in inches).
• Relative Distance (D): The distance between the projector and the wall or screen (in cm).
• Picture width (W): The width of the screen projected by the projector onto the wall (in cm).

Note:

• The dimensions in the table above are for reference only, they are approximate and may slightly differ from the actual values.

Power up

• Connect your power cable to the projector, then plug it into the wall outlet.
• Power your projector remote by inserting the appropriate batteries.
• (batteries not included)
• Connect other devices by referencing port labels and descriptions on the next page.
• Step 1. Push the back cover in the direction of the arrow, and after hearing a sound, the back cover will separate from the remote control.
• Step 2. Remove the back cover, then take out the battery.
• Step 3. Install the battery, then put the back cover onto the remote control and push it firmly in the direction of the arrow until it clicks into place. Once you hear a sound, it indicates that it has been installed properly.

Note:

• Pay attention to the positive and negative poles when installing batteries in the remote control.
• When the battery leaks, immediately wipe away any fluid with a dry cloth and replace the batteries with new ones.
• Dispose of used batteries according to local waste disposal rules and regulations of the country or area you live in.

Grab your remote RC605D

• POWER: Turn Projector on and off

PROFILE SELECTOR :

• Switch between different Google Accounts
• SETTINGS: Access the settings

GOOGLE ASSISTANT:

• Ask Google Assistant to find movies, stream apps, play music, and control the TV – all with your voice.

NAVIGATION PAD:

• Move up, down, left, or right, then press the middle button to confirm
• BACK: Return to the previous screen
• HOME: Return to home screen
• Referring to the instructions below
• If Live Tab is supported in the country then launch Live Tab*.
• If the device supports the tuner then launch a deep link to the OEM app.

Volume Button:

• + Increase the volume
• – Decrease the volume
• Netflix: Access the Netflix App
• YouTube: Access the YouTube App
• US Only,
• Some apps, content, and/or features may not be available in all countries. Subject to availability.

Product Overview

CAUTION:

• Do not place objects within 20cm near the heat dissipation vents.
• Do not place any objects near the vents, as this may cause heat to build up inside the projector.
• Do not look directly into the lens to avoid eye damage as this projector emits strong light during use.

Connection Ports

1. Line Out:
   • Connect an analog cable to an external analog audio system.
2. HDMI:
   • Highest quality audio/video connection. Connect the cable box, Blu-ray player, gaming console, or other devices to your projector using HDMI cables.
3. USB:
   • Connect a USB device to access photos, music, and movies.
4. DC:
   • Connect your projector to the power source with the included power cable.

Power Indicator

• Press the power button on the body and the power button on the remote control to turn it on and off.
• The power indicator (a soft white light) to the corresponding projector’s status is as follows.
• During the startup process, the indicator light is always on and then blinks breathingly, and then goes out after entering the main interface of the system.
• After entering the system, the indicator light is always off,
• After entering the shutdown screen, the indicator light is always on.
• When the system is on standby, the indicator light is off.
• The breathing light is always on during the shutdown process, and the breathing light is off after the shutdown.

Keystones & Focus

1. Move the projector, the screen will be omnidirectional automatic correction and auto-focus.
2. Open the settings menu, and find Projector in Settings, here you can choose Keystone Correction or Focus to realize the function.

Hoisting instructions

Note: For hoisting, please use screws of specified specifications and select a suitable bracket.

Specifications

Troubleshooting

Regulatory Compliance

• CE UK CA Hereby, [Formovie (Chongqing) Innovative Technology Co., Ltd.] declares that the radio equipment type [LCD Smart Projector / XMM2102] complies with Directive 2014 / 53 / EU and Radio Equipment Regulations 2017.
• The full text of the declaration of conformity is available at the following internet address: http://www.formovie.com/global/service/support/declaration.html
• This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range.
• BT maximum transmitter power: 100mW at 2.4GHz – 2.4835GHz Wi-Fi 2.4G maximum transmitter power: 100mW at 2.4GHz – 2.4835GHz Wi-Fi 5G maximum transmitter power: 200mW at 5.15GHz – 5.25GHz, 100mW at 5.25GHz – 5.35GHz & 5.47 GHz – 5.725GHz
• All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.
• Correct disposal of the batteries in this product (Applicable in countries with separate collection systems)
• This marking on the battery, manual, or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life.
• Where marked, the chemical symbols Hg, Cd, or Pb indicate that the battery contains mercury, cadmium, or lead above the reference levels in EC Directive 2006/66.
• If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
• To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Important: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure Information: The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits.

This device should be operated with a minimum separation distance of 20cm (8 inches) between the equipment and a person’s body.

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirements.

The device can be used in portable exposure conditions without restriction.

Canada regulatory compliance

This device complies with the Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference,
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Exposure to radio frequency energy

The radiated output power of this device meets the limits of FCC/IC radio frequency exposure limits. This device should be operated with a minimum separation distance of 20 cm (8 inches) between the equipment and a person’s body.
RF warning for Portable device: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

CAUTION:

• Risk of explosion if the battery is replaced by an incorrect type.
• Disposal of a battery into a fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

Product Certifications

• Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
• The terms HDMI, HDMI High-DefinitionMultimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
•  Google TV is the name of this device’s software experience and a trademark of Google LLC. Google, YouTube, and Android TV are trademarks of Google LLC.
• Google Assistant is not available in all languages and countries.
• Availability of services varies by country and language.
• The product marking and safety information are located at the bottom of the product.
• www.formovie.com

Documents / Resources

| Formovie Chongqing Innovative Technology Co Ltd YNN3213 Xming Episode One Smart Projector [pdf] User Manual
YNN3213 Xming Episode One Smart Projector, YNN3213, Xming Episode One Smart Projector, Episode One Smart Projector, One Smart Projector, Smart Projector, Projector
---|---

References

• Formovie Official Site | Cinema in your home - Formovie Global

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>