SYNCWIRE SW-WL642 Magnetic Wireless Charger User Manual

SW-WL642 Magnetic Wireless Charger
User Manual

Package includes:

1. Wireless Charging Pad with USB-C Cable
2. Wall Charger
3. Magnetic Plate
4. Positioner
5. Stickers
6. User Manual

Specifications:

Material: Aluminum alloy, Silicone
Technology: Built-in Magnet Coil
Input: 5V 3A / 9V 2A
Output: 10W (Max); 5W / 7.5W / 10W /, iPhone 7.5W
Cable Length: 4.92ft / 1.5m USB-C Cable
Wall Charger: PD 20W

Steps of Use:

1. Use the positioner and stickers to locate the center part of your phone cases.

2. Place and install the magnetic plate in the central position.

3. Connect the wireless charging pad to the wall charger provided.
   

4. Switch on the power and place your phone to start charging.

5. Adjust the angle of the stand holder when using it.

Warnings:

1. Please use the kits provided only.
2. Do not place coins, cards, keys, or any other magnetic goods.
3. Do not disassemble, repair or reassemble the product.
4. Keep away from liquids or high temperatures.
5. Do not knock or drop this product to avoid internal damage.
6. Dispose of this product as per local law and regulations.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance between 20cm of the radiator of your body.
FCC ID: 2ASUP-SW-WL641
Manufacturer’s Name: Shenzhen Leaderment Technology Co., Ltd. Sample Description: Magnetic Wireless Charger Model Number: SW-WL640, SW-WL641, SW- WL642 Operating Temperature: -10° C to 40° C

Manufacturer’s Name: Shenzhen Leaderment Technology Co., Ltd.
Sample Description: Magnetic Wireless Car Charger
Model number: SW-WL640, SW-WL641, SW-WL642
Operating Temperature: -10° C to 40° C
This device was tested for operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the charger, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
The device is in compliance with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations SI 2017:1206 (as amended). 1. The device complies with RF specifications when the device is used at 20cm from your body.
Declaration of Conformity:
Hereby, Shenzhen Leaderment Technology Co., Ltd. Declares that the products SW-WL640, SW-WL641, SW-WL642 are in compliance with the following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016, and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electrical Equipment 2012. The Full text of the UK declaration of conformity is available at the following internet address:
https://www.leaderment.com/

Prolinx GmbH
Brehmstr.56, 40239 Duesseldorf Germany
Syncwire UK Ltd
C/O Lai and Co.109 Portland Street, Manchester, M1 6N

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>