SYNCWIRE J1772 Tesla to Charging Adapter User Manual
- June 14, 2024
- SYNCWIRE
Table of Contents
Tesla to J1772 Charging Adapter
User Manual
Please read all the following instructions carefully before using the product.
Product Diagram
Specifications
| Rated Current | 48Amp MAX |
|---|---|
| Rated Voltage | 240V MAX |
| Plug-in/Pull-out Lifetime | 10,000+ Times |
| Appropriate Charging Station | Tesla Charger |
| Applicable Electric Vehicles | All J1772 Charging Ports |
| Waterproof Rated | IP65 |
| Operating Temperature | -22°F to 122°F |
Package Contents
| Tesla to J1772 Charging Adapter
---|---
| Storage Bag
| User Manual
How to use
Step 1: First connect the Tesla charging cable to the
adapter.
Step 2: Once connected, switch
the LOCK/OPEN button on the bottom of the adapter to LOCK position to ensure a
secure connection.
Step 3: Plug the adapter firmly
into your J1772 EV to charge your car.
Step 4: When charging is complete, press the locking mechanism to
disconnect the adapter from J1772 charging port. Then switch the LOCK/OPEN
button to OPEN position to disconnect the Tesla charging cable.
Attention:
- When connecting to Tesla charging cable, make sure the output is less than 48Amp.
- Please make sure the input and output ports are tightly connected with the adapter.
- Do not attempt to open, disassemble, repair, tamper with, or modify the adapter.
- Do not use the adapter if it is broken.
- Keep the adapter dry and away from high heat.
- Please use the adapter with care.
THANK YOU FOR TRUSTING SYNCWIRE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>