SYNCWIRE SW-EV784 EV Cable Charging User Manual
- June 14, 2024
- SYNCWIRE
Table of Contents
SYNCWIRE SW-EV784 EV Cable Charging
FEATURE
Symbol Meaning
| Symbol | Mean i ng |
|---|---|
| “Non-recyclable” Mark: located on the product, instruction manual or |
package, indicating that electrical and electronic equipment and its
accessories should be t related separately from ordinary household waste. When
scrapped, it should be treated as industrial waste, otherwise it may cause
accidents.
| Warning Sign: indicates danger. Pay attention to the personal injury that
may be caused by operation procedure or incorrect operation. Actions after the
“Warning” sign can only be performed w hen the conditions indicated by the
condition are fully understood and satisfied.
The company is committed to the continuous improvement and update of the product, product hardware and software will continue to upgrade, the information provided is subject to change without prior notice.
Product Overview
These EV charging cable, by standard IEC/EN 62196 type 2 to type 2, are intended to be used in EV conductive charging systems and for circuits specified in IEC 61851-1. It is to be used in an ambient temperature of between -35°C and +50°C by simply plugging usage.
Technical data
Model No .| SW-EV784 SW-EV951
SW-EV785 SW-EV952
SW-EV790 SW-EV958
SW-EV793 SW-EV796
| SW-EV786 SW-EV955
SW-EV787 SW-EV956
SW-EV791 SW-EV957
SW-EV794 SW-EV797
| SW-EV788 SW-EV949
SW-EV789 SW-EV950
SW-EV792 SW-EV959
SW-EV795 SW-EV798
---|---|---|---
Rated current| 32A| 16A| 32A
Rated voltage| 480V| 480V| 250V
Phase| 3 Phases| 3 Phases| 1 Phase
Cables| 5G6mm2+2×0.5mm2| 5G2.5mm2+2×0.5mm2| 3G6mm2+2×0.5 mm2
Coding resistor| 2200 0.5W| 6800 0.5W| 2200 0.5W
Rated power| 22Kw| 11Kw| 7.2Kw
- Charging power subject to power design of EVSE device and vehicle.
Electrical performance
| Protection rank | IP54 |
|---|---|
| Fire retardant level | 94-V0 |
| Insulation resistance | > 100MO (DC 500V) |
| Terminal temperature rise | <50K |
| Withstand voltage | 2000V |
| Contact resistance | 0.5mO (Max) |
| Coupled insertion force | >45N <80N |
| Operating temperature | -35°C to 50°C / -31 °F to 122 °F |
| Mechanical life | no load plug in/ pull out> 10000 times |
| Impact of external forces | qualify 1 m drop or 2 Ton vehicle run |
over
USAGE
-
Insert the cable plugs into the vehicle inlet and charging station outlet.
-
Make sure both plugs are properly connected, then charging will start.
-
Do not disconnect the charging cable while the vehicle is charging.
-
After charging is completed, please unplug the charging cable from the vehicle, then from the charging station.
-
As shown in the diagrams, please wipe the EV cable with the cloth included, then roll it up and store it in the storage bag after charging is complete.
WARNINGS
- Please do not use any extension cord or adapter. & damaged in any means). ‘I
- Please do not plug the charging cable into a defective, loose or worn power outlet.
- Please do not insert the plug if any electrical outlet is wet or dirty.
- Please do not dismantle the protective cap. It protects the charging connector from moisture and dirt. After every use put the protective dust caps back on.
- Please do not try to disassemble the shell or any part of the cable. It will cause damages to the item and thus cause serious results when charging.
- Accordingly to your charging device and vehicle, the power rate is backwards compliant, yet couldn’t handle higher power rate, which will cause temperature rise and charging shutdown.
HANDLING
Please handle the charging cable with care. Do not pull, twist, tangle, drag, drop or step on it.
CARE
Clean the charging cable only when it is disconnected by using a damp cloth. Please do not use water or chemicals when cleaning the cable.
